Clearance / Ex-Display Units - Click here 
NOTICE: Pylontech New Stock with Lower Price Expected End of May 2023
  • Global Delivery Available
  • Solar Experts Since 2002
  • 5 Year Extended Warranty

HOPPECKE Sun Power VR M 2V. 2-890 Lead Acid Battery

0% of 100
HOPPECKE sun | power VR M is a maintenance-free bloc battery based on absorbent glass mat technology (AGM). 2V Bloc 890Ah
£350.00 Incl VAT.
Accepted Payment Methods
AGM Lead Acid

Sun Power VR M 2V. 2-890AH High Performance AGM Hoppecke Batteries

Gel-ESS Technology

The construction principle of the HOPPECKE sun | power VR M batteries is based on the use of grid plates and ESS technology. Due to the high energy density, HOPPECKE sun | power VR M batteries have a very small space requirement and thus allow maximum use of the space. 


Your benefits at a glance

  • Maintenance-free due to refilling of water through innovative Absorbent Glass Mat technology (AGM technology)
  • Optimized cycle stability due to optimized electrode design for efficiently charge current acceptance
  • Higher short-circuit safety even during the installation – based on HOPPECKE system connectors
  • Optimum operational safety – integrated backfire protection
Indicative energy storage at C100: 
892 Ah x 48 V = 42,8 kWh
892Ah x 24 V = 21.4Kwh


182mm x 304mm x 310mm. Weight 50.3kg



  • IEC 60896-21/22 and IEC 61427
  • Flammability Class UL 94



  • Solar home storage systems
  • Street lighting
  • Medical care facilities
  • Signalling systems
  • Leisure applications

Steel mounting rack for 24V / 48V configuration included when you buy 12 or 24 blocks:


Charge Capacities 

Charging Rates                                                              

Sun Power VR M 2-890

Nominal Voltage per cell 2V
C100/ 1.85V 892Ah
C50/ 1.80V 921Ah
C24/ 1.80V 896Ah
C10 / 1.80V 834Ah



Download the Rack 12/24 manual:






Valve regulated lead acid – AGM (Absorbent Glass Matt)

Nominal voltage module:


Capacity C10:

411 – 1070 Ah

Charge curve:

IU-curve, Imax without limitation

Float charge voltage:

2,28 VpC +/-1%

Float charge current:

10 – 40 mA/100Ah

Boost charge voltage:

2,35 - 2,40 V/cell, time limited

Charge current (recommended):

5 – 20A/100Ah

Design Life:

6 – 9 years if HOPPECKE manuals are observed

Cycle life time 80% DOD:

1200 cycles (according to 61427, converted from the solar cycles)

Temperature range:

-20 to 45°C

Temperature correction factor at float charge voltage:

-3mV/cell per K

Self-discharge rate:

Approx. 2-3% per month

Protection class:

IP 25, according DIN 40050, touch protection according BGV A3

Positive and negative electrodes:

Thin plate technology with high cycle ability and corrosion resistant flat plates


High quality microporous glass matt separator with high absorption and stability


Diluted sulphuric acid with gel additives, fixed in AGM (Absorbent Glass Matt)

Cell jar and lid:

High stability polypropylene, flammability class UL 94 HB and ABS UL 94 V0


Moulded plastic coated lead terminal

Pole bushing:

100% gas- and electrolyte-tight, compound pole welded to the lid


Screw terminal with non-ferrous insert (brass M8)

Cell connectors:

Block connector: Insulated, rubber moulded, solid copper

Group connector: Flexible, insulated cable

Terminal screw:

Plastic coated terminal screw M8x22, WS 22, measuring point


Write a review:
Write a review: