{"title":"Victron Battery Monitors and SmartShunt","description":"\u003cp\u003eKnowing your battery state of charge accurately is the difference between a reliable system and an unexpected flat battery. Victron battery monitors measure current, voltage, and temperature to calculate a precise state of charge using coulomb counting, far more accurate than voltage-based guessing alone. The SmartShunt combines a compact 500A shunt with full Bluetooth connectivity for app monitoring without a separate display unit. The BMV-712 adds a dedicated display panel with historical data and relay output. Both integrate fully with Victron GX devices and the VRM online portal.\u003c\/p\u003e","products":[{"product_id":"battery-monitor-bmv-712-smart","title":"Victron Battery Monitor BMV-712 Smart - BAM030712000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eBattery Monitor BMV-712 Smart — BAM030712000\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-712 Smart is a precision battery monitor designed for 12V, 24V and 48V battery systems. It measures state of charge, voltage, current, power and consumed amp-hours, giving installers and system operators accurate, real-time data on battery health and usage. Bluetooth connectivity is built in, making it compatible with the Victron Connect app on iOS and Android without any additional hardware.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in Bluetooth for direct connection to the VictronConnect app on iOS and Android devices.\u003c\/li\u003e\n  \u003cli\u003eDisplays state of charge (%), voltage, current (amps), power (watts) and consumed amp-hours simultaneously.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 12V, 24V and 48V battery systems, including lead-acid, AGM, gel and lithium chemistries.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay output that can trigger alarms or control external devices based on configurable thresholds.\u003c\/li\u003e\n  \u003cli\u003eMidpoint voltage monitoring for series-connected battery banks, helping identify cell or battery imbalance early.\u003c\/li\u003e\n  \u003cli\u003eHistorical data logging including deepest discharge, average discharge, number of charge cycles and time since last full charge.\u003c\/li\u003e\n  \u003cli\u003eLarge backlit display with clear readout, suitable for panel mounting in control rooms, vehicles and marine installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-712 Smart uses a precision shunt (sold separately or included depending on kit) to measure current flowing in and out of the battery bank. From this, it calculates state of charge using a Peukert-corrected algorithm, which accounts for the non-linear discharge behaviour of lead-acid batteries. For lithium batteries, the algorithm can be adjusted to match the flatter discharge curve. This level of accuracy is important in off-grid and marine systems where knowing the true remaining capacity determines whether loads can be run safely overnight or during low-generation periods.\u003c\/p\u003e\n\u003cp\u003eThe built-in Bluetooth module connects directly to VictronConnect without a separate dongle. From the app, you can configure all parameters including battery capacity, charge efficiency factor, Peukert exponent, alarm thresholds and relay behaviour. The same app displays live data and historical trends. The BMV-712 also supports integration with the Victron GX device ecosystem, allowing data to be fed into a Venus GX, Cerbo GX or similar for centralised system monitoring via the VRM portal.\u003c\/p\u003e\n\u003cp\u003eThe programmable relay is a practical feature often overlooked. It can be configured to close or open based on state of charge, voltage or temperature (with optional temperature sensor), making it useful for load shedding, generator start signals or alarm outputs. This removes the need for a separate relay module in many installations.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBAM030712000\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCompatible battery voltages\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e12V, 24V, 48V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eConnectivity\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBluetooth (VictronConnect app)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eDisplay\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBacklit LCD\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eRelay output\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eProgrammable (configurable thresholds)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eMidpoint voltage monitoring\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e0.627 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076037781\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems where accurate state of charge monitoring is critical for load management.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat installations requiring reliable battery monitoring with panel-mount display.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and campervan leisure battery systems with 12V or 24V banks.\u003c\/li\u003e\n  \u003cli\u003eBackup power and UPS systems where battery health tracking is required for maintenance schedules.\u003c\/li\u003e\n  \u003cli\u003eSeries battery banks (48V systems) where midpoint voltage monitoring helps detect imbalance between batteries.\u003c\/li\u003e\n  \u003cli\u003eVictron GX-based systems requiring a monitor that integrates with VRM portal and Cerbo GX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-712 Smart monitor head unit with backlit display\u003c\/li\u003e\n  \u003cli\u003e500A\/50mV shunt\u003c\/li\u003e\n  \u003cli\u003eRJ12 connection cable (monitor to shunt)\u003c\/li\u003e\n  \u003cli\u003eBattery cable with fuse\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe BMV-712 Smart should be installed by a qualified electrician or experienced system integrator familiar with DC battery systems. The shunt must be installed on the negative battery terminal with all negative loads and charge sources connected to the load side of the shunt, not directly to the battery. Incorrect shunt wiring is the most common cause of inaccurate readings. For lithium battery installations, ensure the Peukert exponent and charge efficiency settings are adjusted from their lead-acid defaults. Temperature compensation requires the optional temperature sensor accessory. For systems integrated with a Cerbo GX or Venus GX, connect via the VE.Direct port using the appropriate cable.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47440986833230,"sku":"BAM030712000","price":109.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-battery-monitor-bmv-712-smart-bam030712000-939935.jpg?v=1747936698"},{"product_id":"victron-temperature-sensor-bmv-702-712","title":"Victron Temperature sensor for BMV-702\/712 - ASS000100000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eTemperature Sensor for BMV-702 and BMV-712 Battery Monitors\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Temperature Sensor is an add-on accessory for the BMV-702 and BMV-712 battery monitors. It connects directly to the monitor's accessory port and enables battery temperature measurement, allowing the BMV to display temperature data and apply temperature-compensated state-of-charge calculations.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with the Victron BMV-702 and BMV-712 battery monitors via the dedicated accessory port.\u003c\/li\u003e\n  \u003cli\u003eEnables real-time battery temperature display on the BMV monitor.\u003c\/li\u003e\n  \u003cli\u003eAllows the BMV-712 to transmit temperature data over Bluetooth to the VictronConnect app.\u003c\/li\u003e\n  \u003cli\u003eSupports temperature-compensated battery monitoring for more accurate state-of-charge readings.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 70 g, with a simple plug-in installation requiring no additional tools.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS000100000 | GTIN: 8719076019183\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-702 and BMV-712 battery monitors include an accessory port designed to accept optional sensors. This temperature sensor plugs directly into that port, adding battery temperature measurement to the monitor's existing voltage, current and state-of-charge functions. No wiring modifications are required beyond connecting the sensor to the battery terminal and the monitor port.\u003c\/p\u003e\n\n\u003cp\u003eTemperature data is particularly useful in lead-acid battery systems, where charge acceptance and capacity vary significantly with temperature. When this sensor is fitted to a BMV-712, the temperature reading is also broadcast via Bluetooth, making it visible in the VictronConnect app alongside all other monitored parameters. This is useful for remote monitoring in installations where physical access to the battery bank is limited.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS000100000\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019183\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.07 kg\u003c\/li\u003e\n  \u003cli\u003eCompatible monitors: BMV-702, BMV-712\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems where battery temperature fluctuates significantly between seasons.\u003c\/li\u003e\n  \u003cli\u003eMarine and motorhome installations requiring accurate battery state-of-charge in varying ambient conditions.\u003c\/li\u003e\n  \u003cli\u003eLead-acid battery banks where temperature compensation improves charge accuracy.\u003c\/li\u003e\n  \u003cli\u003eAny BMV-702 or BMV-712 installation where battery temperature monitoring is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Temperature Sensor for BMV-702\/712 (ASS000100000)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis sensor is designed for straightforward plug-in installation on compatible BMV-702 and BMV-712 monitors. Ensure the monitor's accessory port is not already occupied by a midpoint voltage sensor or other accessory before purchasing. While installation is simple, all work on battery systems should be carried out with appropriate care. For larger off-grid or marine battery installations, a qualified electrician or accredited installer is recommended.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47441080451406,"sku":"ASS000100000","price":23.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/temperature-sensor-for-bmv-702712-ass000100000-564600.jpg?v=1747936751"},{"product_id":"victron-smartshunt-500a-50mv","title":"Victron SmartShunt 500A\/50mV - SHU050150050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron SmartShunt 500A\/50mV — SHU050150050\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron SmartShunt 500A\/50mV is a standalone battery monitor that measures state of charge, consumed amp hours, and voltage without requiring a dedicated display unit. It connects directly to the VictronConnect app via Bluetooth, making it a practical choice for installers and off-grid system builders who need accurate battery monitoring without the cost or complexity of a full BMV monitor.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e500A continuous current rating with a 50mV shunt drop, suitable for most 12V, 24V and 48V battery banks.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in Bluetooth connects to the VictronConnect app on iOS and Android for real-time monitoring and configuration.\u003c\/li\u003e\n  \u003cli\u003eMonitors state of charge (%), consumed amp hours, voltage, current, power, and time remaining.\u003c\/li\u003e\n  \u003cli\u003eSupports a wide range of battery chemistries including lead-acid (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n  \u003cli\u003eCompact, shunt-only form factor replaces the need for a separate display, reducing installation space and cost.\u003c\/li\u003e\n  \u003cli\u003eConfigurable charge efficiency factor, Peukert exponent, and tail current settings for accurate SoC tracking across different battery types.\u003c\/li\u003e\n  \u003cli\u003eVE.Direct port allows integration with Victron GX devices, MPPT solar charge controllers, and other compatible equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt functions as the measurement core of a battery monitoring system. The 50mV shunt drop at 500A gives the device a precise reference for calculating current flow in and out of the battery. This data is processed internally and transmitted over Bluetooth to VictronConnect, where users can view live readings, review historical data, and adjust monitoring parameters. No separate display unit or control panel is required, though one can be added if needed.\u003c\/p\u003e\n\n\u003cp\u003eThe VE.Direct port is a significant practical advantage. It allows the SmartShunt to feed battery state-of-charge data into a Victron GX device (such as a Cerbo GX), making it visible on the VRM portal and usable by other devices in the system for load shedding or generator start logic. This makes the SmartShunt a cost-effective entry point into a fully integrated Victron monitoring ecosystem.\u003c\/p\u003e\n\n\u003cp\u003eAccurate state-of-charge tracking depends on correct configuration. The SmartShunt allows adjustment of battery capacity, charge efficiency factor, Peukert exponent, and the tail current threshold used to detect a full charge. Taking time to configure these parameters correctly for the specific battery bank will significantly improve the reliability of the SoC reading over time.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSHU050150050\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eShunt rating\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e500A \/ 50mV\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eConnectivity\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBluetooth (VictronConnect app) + VE.Direct port\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCompatible app\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eVictronConnect (iOS and Android)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e0.32 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076044253\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems requiring battery state-of-charge monitoring without a dedicated display panel.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat installations where panel space is limited and Bluetooth monitoring is preferred.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and campervan leisure battery banks with 12V or 24V systems.\u003c\/li\u003e\n  \u003cli\u003eVictron-based systems using a Cerbo GX or other GX device, where the SmartShunt feeds SoC data via VE.Direct.\u003c\/li\u003e\n  \u003cli\u003eRetrofit monitoring on existing battery banks where a full BMV monitor is not required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVictron SmartShunt 500A\/50mV unit\u003c\/li\u003e\n  \u003cli\u003eVE.Direct cable\u003c\/li\u003e\n  \u003cli\u003eConnection cable for battery negative\u003c\/li\u003e\n  \u003cli\u003eDocumentation and quick-start guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt must be installed in the negative battery lead, between the battery negative terminal and all other negative connections in the system. All negative return currents must pass through the shunt for accurate measurement. Incorrect wiring, such as bypassing the shunt with a direct chassis ground, will produce inaccurate readings. Installation should be carried out by a qualified electrician or experienced installer familiar with DC battery systems. For systems integrated into a solar PV installation, a qualified or MCS-accredited installer is recommended.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47441524064590,"sku":"SHU050150050","price":68.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/smartshunt-500a50mv-shu050150050-688289.jpg?v=1747936963"},{"product_id":"victron-smartshunt-1000a","title":"Victron SmartShunt 1000A - SHU050210050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron SmartShunt 1000A — SHU050210050\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron SmartShunt 1000A is a standalone battery monitor designed for professional solar, off-grid and marine installations where accurate state-of-charge tracking is essential. It connects directly to a smartphone or tablet via Bluetooth, removing the need for a separate display unit. Suitable for any battery chemistry, it suits installers and system integrators who need reliable monitoring without additional hardware overhead.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1000A continuous current rating, suitable for large battery banks in off-grid, marine and commercial vehicle applications.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in Bluetooth connectivity allows monitoring via the Victron Connect app on iOS and Android without a separate display.\u003c\/li\u003e\n  \u003cli\u003eMonitors state of charge, voltage, current, power, consumed amp-hours, time to go and historical data.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all common battery chemistries including lead-acid (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n  \u003cli\u003eVE.Direct port enables integration with Victron GX devices, Cerbo GX and the VRM online monitoring portal.\u003c\/li\u003e\n  \u003cli\u003eConfigurable battery parameters including capacity, Peukert exponent, charge efficiency factor and tail current.\u003c\/li\u003e\n  \u003cli\u003eCompact shunt-only form factor: no separate monitor head required, reducing panel space and wiring complexity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt replaces the traditional shunt-plus-display combination by integrating all monitoring electronics directly into the shunt body. All data is transmitted over Bluetooth to the VictronConnect app, which provides a clear dashboard of battery status in real time. This makes it particularly practical in installations where panel space is limited or where a permanent display is unnecessary, such as in battery enclosures, camper van builds or remote off-grid cabinets.\u003c\/p\u003e\n\n\u003cp\u003eThe 1000A rating makes this variant appropriate for larger systems: high-capacity lithium battery banks, parallel battery configurations and heavy-load DC systems in commercial vehicles or vessels. The VE.Direct port means the SmartShunt can feed data directly into a Victron GX device, making it a straightforward addition to any Victron-based system that uses the VRM portal for remote monitoring. Battery parameters are fully configurable, so the monitor can be calibrated accurately to the specific battery bank in use.\u003c\/p\u003e\n\n\u003cp\u003eUnlike a BMV battery monitor, the SmartShunt has no display of its own. If a permanent on-panel readout is required, a BMV-712 or a GX display is the appropriate choice. For installations where app-based or remote monitoring is sufficient, the SmartShunt offers the same measurement accuracy in a smaller, lower-cost package.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSHU050210050\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eContinuous current rating\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e1000A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eConnectivity\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBluetooth (VictronConnect app) and VE.Direct\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCompatible battery chemistries\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eLead-acid (AGM, gel, flooded), LiFePO4 and other lithium\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eDisplay\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eNone (app-based via VictronConnect)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e1 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076044260\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge off-grid solar systems with high-capacity battery banks requiring accurate state-of-charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat DC systems where panel space is limited and app-based monitoring is preferred.\u003c\/li\u003e\n  \u003cli\u003eCommercial vehicle and motorhome leisure battery installations with heavy DC loads.\u003c\/li\u003e\n  \u003cli\u003eVictron-based systems integrated with a Cerbo GX or other GX device for VRM remote monitoring.\u003c\/li\u003e\n  \u003cli\u003eParallel battery bank configurations where total current draw exceeds the range of lower-rated shunts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVictron SmartShunt 1000A (SHU050210050)\u003c\/li\u003e\n  \u003cli\u003eConnection cable for battery negative and auxiliary input\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt must be installed in the negative battery cable between the battery negative terminal and all other negative connections in the system. All negative loads and charge sources must return through the shunt to ensure accurate current measurement. Installation in high-current DC systems should be carried out by a qualified electrician or experienced system integrator. For marine installations, follow applicable wiring standards for the vessel type. The unit does not require a separate power supply beyond the battery connection itself.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47441623056718,"sku":"SHU050210050","price":118.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/smartshunt-1000a50mv-shu050210050-468915.jpg?v=1747937150"},{"product_id":"victron-smartshunt-2000a-shu050220050","title":"Victron SmartShunt 2000A - SHU050220050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron SmartShunt 2000A — SHU050220050\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron SmartShunt 2000A is a standalone battery monitor designed for high-current battery systems where accurate state-of-charge tracking is essential. It connects directly to a smartphone or tablet via Bluetooth, removing the need for a separate display unit. Suited to professional off-grid, marine and vehicle installations where large battery banks are in use.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2000A continuous current rating, suitable for large battery banks and high-draw systems.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in Bluetooth connectivity allows monitoring via the Victron Connect app on iOS and Android without additional hardware.\u003c\/li\u003e\n  \u003cli\u003eMeasures state of charge, voltage, current, power, consumed amp-hours, and time remaining.\u003c\/li\u003e\n  \u003cli\u003eNo display unit required — the SmartShunt acts as the monitor itself, keeping installation compact.\u003c\/li\u003e\n  \u003cli\u003eCompatible with the Victron VE.Direct port for integration with GX devices, MPPT controllers and other Victron equipment.\u003c\/li\u003e\n  \u003cli\u003eSupports multiple battery chemistries including lead-acid (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n  \u003cli\u003eConfigurable alarm and relay outputs for low state-of-charge or voltage threshold alerts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\n\u003cp\u003eThe SmartShunt replaces the traditional shunt-plus-display combination with a single unit. All monitoring data is accessed through the Victron Connect app over Bluetooth, which provides a clear dashboard view of battery status in real time. This approach reduces wiring complexity and eliminates the need to mount a dedicated display panel, which is particularly useful in space-constrained installations such as motorhomes, narrowboats and off-grid cabins.\u003c\/p\u003e\n\n\u003cp\u003eAt 2000A, this is the highest-rated model in the SmartShunt range. It is intended for systems with very large battery banks or high continuous loads, such as electric propulsion assist, large inverter installations or commercial off-grid setups. The VE.Direct port allows the SmartShunt to feed data into a Victron Cerbo GX or other GX device, making it a straightforward addition to a full Victron system. Battery chemistry and capacity parameters are configured in the app, ensuring accurate state-of-charge calculations for the specific battery type in use.\u003c\/p\u003e\n\n\u003cp\u003eThe unit also supports synchronisation with solar charge controllers and other sources, so the state-of-charge reading accounts for all charge and discharge currents entering and leaving the battery. This is important in multi-source systems where accuracy would otherwise be compromised by unmonitored charge paths.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSHU050220050\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eContinuous current rating\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e2000A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eConnectivity\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBluetooth (Victron Connect app) and VE.Direct\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCompatible battery chemistries\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eLead-acid (AGM, gel, flooded), LiFePO4\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076044277\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e2 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge off-grid battery systems requiring accurate state-of-charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat installations with high-capacity battery banks.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and coach conversions with significant 12V or 24V loads.\u003c\/li\u003e\n  \u003cli\u003eCommercial off-grid sites with multiple battery strings and high continuous draw.\u003c\/li\u003e\n  \u003cli\u003eVictron system integrations using a Cerbo GX or Venus GX for centralised monitoring.\u003c\/li\u003e\n  \u003cli\u003eElectric vehicle auxiliary battery monitoring where high current measurement is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron SmartShunt 2000A (SHU050220050)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt must be installed by a qualified electrician or experienced system integrator. At 2000A, the unit is intended for high-current DC systems where incorrect wiring presents a serious risk of damage or injury. The shunt must be placed on the negative battery terminal side, with all negative loads and charge sources connected to the load side of the shunt. Ensure cable sizing and fusing are appropriate for the system current. Configuration of battery parameters should be completed in the Victron Connect app before commissioning to ensure accurate monitoring from the outset.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47441763172686,"sku":"SHU050220050","price":152.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/smartshunt-2000a50mv-shu050220050-452743.jpg?v=1747937342"},{"product_id":"victron-smartshunt-500a-50mv-ip65","title":"Victron SmartShunt 500A\/50mV IP65 - SHU065150050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron SmartShunt 500A\/50mV IP65 — SHU065150050\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron SmartShunt 500A\/50mV IP65 is a standalone battery monitor designed for professional solar, off-grid and marine installations where accurate state-of-charge data is essential. It connects directly to a smartphone or tablet via Bluetooth, removing the need for a separate display unit. The IP65 rating makes it suitable for installations in damp or dusty environments.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e500A continuous current rating with a 50mV shunt drop, suitable for high-capacity battery banks.\u003c\/li\u003e\n  \u003cli\u003eIP65 rated enclosure, providing protection against dust ingress and low-pressure water jets.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in Bluetooth for direct connection to the Victron Connect app on iOS and Android devices.\u003c\/li\u003e\n  \u003cli\u003eMonitors state of charge, voltage, current, power, consumed amp-hours and time remaining.\u003c\/li\u003e\n  \u003cli\u003eConfigurable battery capacity, charge efficiency factor, Peukert exponent and tail current settings to suit lead-acid, AGM, gel and lithium battery chemistries.\u003c\/li\u003e\n  \u003cli\u003eRelay output for high or low voltage alarms, state-of-charge alarms or other user-defined triggers.\u003c\/li\u003e\n  \u003cli\u003eCompatible with the Victron VE.Direct ecosystem, allowing integration with GX devices, MPPT controllers and Venus OS installations.\u003c\/li\u003e\n  \u003cli\u003eNo display required on the unit itself, reducing installation complexity and cost.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt replaces a traditional battery monitor shunt and display combination with a single compact unit. All monitoring and configuration is handled through the Victron Connect app over Bluetooth, which means there is no wiring required for a remote display panel. This is particularly useful in installations where panel space is limited or where the battery bank is located in an awkward position.\u003c\/p\u003e\n\n\u003cp\u003eThe 500A\/50mV rating means the shunt itself produces a 50 millivolt drop at full rated current. This is the standard shunt specification used across most battery monitor designs and is compatible with the measurement circuitry built into the SmartShunt. The IP65 rating distinguishes this variant from the standard SmartShunt: it is housed in a sealed enclosure that resists dust and water ingress, making it appropriate for engine rooms, battery compartments in boats, caravans and outdoor off-grid enclosures where condensation or spray may be present.\u003c\/p\u003e\n\n\u003cp\u003eThe VE.Direct port allows the SmartShunt to feed data into a Victron GX device such as a Cerbo GX or Venus GX, making battery state-of-charge visible on a system overview alongside solar yield, inverter load and grid status. This integration is straightforward and requires only a standard VE.Direct cable.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSHU065150050\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eShunt rating\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e500A \/ 50mV\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eIP rating\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eIP65\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eConnectivity\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBluetooth (Victron Connect app), VE.Direct\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCompatible battery chemistries\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eLead-acid, AGM, gel, lithium\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eRelay output\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eYes (programmable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e0.5 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076057895\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems requiring accurate battery state-of-charge monitoring without a dedicated display panel.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat installations where IP65 protection is needed against condensation and bilge spray.\u003c\/li\u003e\n  \u003cli\u003eMotorhome, campervan and caravan leisure battery banks monitored via smartphone.\u003c\/li\u003e\n  \u003cli\u003eBattery storage systems integrated with Victron GX devices for whole-system monitoring via Venus OS.\u003c\/li\u003e\n  \u003cli\u003eCommercial off-grid installations where the battery enclosure is remote from any control panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron SmartShunt 500A\/50mV IP65 unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt must be installed in the negative battery cable between the battery negative terminal and all other negative connections in the system. All negative loads and charge sources must return through the shunt for accurate current measurement. Installation in battery systems above 48V or in lithium battery installations should be carried out by a qualified electrician or accredited installer. The VE.Direct port requires a separate cable (not included) for integration with GX devices.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47441941102926,"sku":"SHU065150050","price":74.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/smartshunt-500a50mv-ip65-shu065150050-764960.jpg?v=1747937544"},{"product_id":"victron-smartshunt-300a-battery-monitor","title":"Victron SmartShunt 300A - SHU050130050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy SmartShunt 300A Battery Monitor\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron SmartShunt 300A is a standalone battery monitor that connects via Bluetooth to the VictronConnect app. It tracks state of charge, voltage, current, power, consumed amp-hours and time remaining without requiring a separate display unit. Suited to off-grid, marine, vehicle and backup power installations where accurate battery data is essential.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitors state of charge, voltage, current, power, consumed amp-hours and time-to-go via Bluetooth\u003c\/li\u003e\n  \u003cli\u003eRated at 300A continuous with a 500A peak current capability\u003c\/li\u003e\n  \u003cli\u003eConnects directly to the VictronConnect app on iOS and Android with no additional hardware required\u003c\/li\u003e\n  \u003cli\u003eCompatible with all battery chemistries including lead-acid, AGM, gel, lithium (LiFePO4) and lithium-ion\u003c\/li\u003e\n  \u003cli\u003eCompact, display-free design reduces installation complexity and cost compared to traditional battery monitors\u003c\/li\u003e\n  \u003cli\u003eSupports VE.Direct output for integration with Victron GX devices and the Venus OS ecosystem\u003c\/li\u003e\n  \u003cli\u003eConfigurable charge and discharge efficiency factors, Peukert exponent and tail current settings for accurate SoC calculation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt replaces a conventional shunt-and-display monitor with a single unit that handles both measurement and data transmission. The shunt itself carries the battery negative current while the internal electronics measure voltage drop across the precision resistor to calculate current flow. All data is transmitted over Bluetooth Low Energy to VictronConnect, which displays live readings and historical data on a smartphone or tablet.\u003c\/p\u003e\n\n\u003cp\u003eThe 300A rating covers the majority of off-grid and mobile installations. For systems with higher sustained loads, Victron also produces 500A and 2000A variants. The VE.Direct port allows the SmartShunt to feed data into a Cerbo GX or other GX device, making battery state visible on the VRM portal and enabling integration with inverter\/chargers and MPPT solar charge controllers across the same Victron installation.\u003c\/p\u003e\n\n\u003cp\u003eAccurate state-of-charge calculation depends on correct configuration. The SmartShunt allows adjustment of battery capacity, charge efficiency factor, Peukert exponent and synchronisation thresholds. Taking time to configure these parameters for the specific battery bank will give significantly more reliable SoC readings than factory defaults alone.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHU050130050\u003c\/li\u003e\n  \u003cli\u003eCurrent rating: 300A continuous\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.235 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076065708\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar battery banks requiring accurate state-of-charge monitoring\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat 12V or 24V house battery systems\u003c\/li\u003e\n  \u003cli\u003eMotorhome, campervan and vehicle leisure battery installations\u003c\/li\u003e\n  \u003cli\u003eBackup power and UPS systems where battery health visibility is critical\u003c\/li\u003e\n  \u003cli\u003eIntegration into existing Victron systems via VE.Direct and GX devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVictron SmartShunt 300A unit\u003c\/li\u003e\n  \u003cli\u003eVE.Direct cable\u003c\/li\u003e\n  \u003cli\u003eTemperature sensor\u003c\/li\u003e\n  \u003cli\u003eNegative battery cable connection hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt must be installed in the negative battery cable, between the battery negative terminal and all other negative connections in the system. All negative loads and chargers must return through the shunt for accurate current measurement. Installation in a 12V, 24V or 48V DC system should be carried out by a qualified electrician or experienced installer familiar with battery systems. For marine installations, compliance with relevant BMEA or ISO wiring standards is recommended.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":49477510070606,"sku":"SHU050130050","price":53.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-smartshunt-300a-shu050130050-317781.webp?v=1747947305"},{"product_id":"victron-smartshunt-300a-ip65","title":"Victron SmartShunt 300A IP65 - SHU065130050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron SmartShunt 300A IP65\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron SmartShunt 300A IP65 is a battery monitor designed for use in environments where moisture and dust ingress are a concern. It measures current, voltage, state of charge, consumed amp-hours, and time-to-go, transmitting all data wirelessly via Bluetooth to the VictronConnect app. No display is required on the unit itself, making it a compact and cost-effective alternative to a full battery monitor with a dedicated screen.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated enclosure provides protection against dust ingress and low-pressure water jets, suitable for exposed or damp installations.\u003c\/li\u003e\n  \u003cli\u003e300A continuous current rating covers the majority of 12V, 24V and 48V battery systems used in off-grid, marine and vehicle applications.\u003c\/li\u003e\n  \u003cli\u003eBluetooth connectivity built in, with no additional dongle required. Pairs directly with the free VictronConnect app on iOS and Android.\u003c\/li\u003e\n  \u003cli\u003eMonitors state of charge, voltage, current, consumed amp-hours, instantaneous power, and time-to-go from a single device.\u003c\/li\u003e\n  \u003cli\u003eSupports a wide range of battery chemistries including lead-acid (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n  \u003cli\u003eIntegrates with the Victron GX ecosystem, allowing data to be logged and viewed via Venus OS devices and the VRM portal.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 0.31 kg, with no separate shunt box required as the shunt is built into the unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt replaces the traditional combination of a standalone shunt and a wired battery monitor display. All monitoring functions are handled internally, with data accessed through Bluetooth rather than a physical screen. This reduces wiring complexity and allows the unit to be mounted close to the battery bank, even in locations where a display would be impractical to read.\u003c\/p\u003e\n\n\u003cp\u003eThe IP65 rating distinguishes this variant from the standard SmartShunt. It is suited to installations where the monitor may be exposed to condensation, spray or dusty conditions, such as engine bays, bilges, outdoor enclosures or agricultural vehicles. The sealed enclosure does not compromise the Bluetooth range or the accuracy of the current measurement.\u003c\/p\u003e\n\n\u003cp\u003eIntegration with Victron's GX devices (Cerbo GX, Venus GX, and others) is achieved via Bluetooth, allowing the SmartShunt to feed data into a full system overview on the VRM portal. This makes it a practical choice for monitored off-grid systems where remote visibility of battery state is required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHU065130050\u003c\/li\u003e\n  \u003cli\u003eCurrent rating: 300A continuous\u003c\/li\u003e\n  \u003cli\u003eIP rating: IP65\u003c\/li\u003e\n  \u003cli\u003eConnectivity: Bluetooth (VictronConnect)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.31 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076065791\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar battery banks where remote state-of-charge monitoring is needed without a wired display.\u003c\/li\u003e\n  \u003cli\u003eMarine installations, including bilge or engine bay mounting where moisture exposure is likely.\u003c\/li\u003e\n  \u003cli\u003eCampervans, motorhomes and HGV auxiliary battery systems.\u003c\/li\u003e\n  \u003cli\u003eAgricultural and construction vehicles with auxiliary power systems.\u003c\/li\u003e\n  \u003cli\u003eOutdoor or partially exposed battery enclosures in telecoms or remote power applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Victron SmartShunt 300A IP65 unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt must be installed in the negative line between the battery bank and all loads and charge sources, with only the battery negative connected directly to the shunt. Incorrect wiring will produce inaccurate readings. Installation should be carried out by a qualified electrician or experienced system integrator familiar with DC battery systems. For off-grid solar systems, an MCS-accredited installer is recommended. Ensure the correct fusing is in place on the positive cable as per the battery manufacturer's recommendations.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":49477582455118,"sku":"SHU065130050","price":55.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-smartshunt-300a-ip65-shu065130050-581940.webp?v=1747947356"},{"product_id":"victron-battery-monitor-bmv-700","title":"Victron Battery Monitor BMV-700 - BAM010700000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Battery Monitor BMV-700 | BAM010700000\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-700 is a precision battery monitor designed for 12V, 24V and 48V battery systems. It gives installers and off-grid users accurate, real-time data on state of charge, voltage, current and consumed amp-hours. Where a simple voltage reading is not enough, the BMV-700 provides the full picture of what a battery bank is actually doing.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDisplays state of charge (%), voltage, current (amps), power (watts), consumed amp-hours and time remaining on a single backlit LCD screen.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 12V, 24V and 48V battery systems, including lead-acid (flooded, AGM, gel) and lithium chemistries.\u003c\/li\u003e\n  \u003cli\u003eHigh-accuracy coulomb counting via a 500A\/50mV shunt, supplied in the box, for precise amp-hour tracking.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay output that can trigger alarms or control external devices based on user-defined thresholds (e.g. low state of charge).\u003c\/li\u003e\n  \u003cli\u003eStores historical data including deepest discharge, average discharge, number of charge cycles and total amp-hours drawn.\u003c\/li\u003e\n  \u003cli\u003eCompact display head with a 52mm panel cut-out, suitable for mounting in switchboards, caravans, boats and off-grid enclosures.\u003c\/li\u003e\n  \u003cli\u003eConnects to the VictronConnect app via an optional VE.Direct Bluetooth Smart dongle for wireless monitoring on iOS and Android.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-700 works by measuring the current flowing in and out of a battery bank through a precision shunt resistor. By integrating this current over time, it calculates consumed amp-hours and derives a state of charge figure that is far more reliable than voltage-based estimation alone. This matters in practice because battery voltage is heavily influenced by load, temperature and recent charge history, making it a poor standalone indicator of how much energy is actually available.\u003c\/p\u003e\n\n\u003cp\u003eThe included 500A\/50mV shunt is installed in the negative cable of the battery bank. The display unit connects to the shunt via a supplied RJ12 cable and draws its power directly from the battery, so no separate supply is needed. The relay output adds practical flexibility: it can be configured to switch at a set state of charge, voltage level or temperature (with an optional temperature sensor), making it useful for load shedding, generator start signals or audible alarms.\u003c\/p\u003e\n\n\u003cp\u003eHistorical data logging is stored on-board and covers up to 30 days of discharge records alongside lifetime counters. This is useful for commissioning checks, fault diagnosis and advising end users on battery health. The BMV-700 does not include Bluetooth as standard, but the VE.Direct port allows connection to a GX device (such as a Cerbo GX) for integration into a full Victron system with remote monitoring via VRM.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBAM010700000\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eVoltage compatibility\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e12V \/ 24V \/ 48V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eShunt rating\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e500A \/ 50mV (included)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eVoltage measurement range\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e9.5 to 95V DC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCurrent measurement range\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e-9999 to 9999A (with appropriate shunt)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eDisplay\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBacklit LCD\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003ePanel cut-out\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e52mm diameter\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eRelay output\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eProgrammable (alarm \/ load control)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCommunication port\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eVE.Direct\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBluetooth\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eNot included (optional VE.Direct Bluetooth dongle required)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e0.627 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076020066\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems where accurate battery state of charge is critical for load management.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat installations requiring panel-mounted battery monitoring.\u003c\/li\u003e\n  \u003cli\u003eMotorhome, campervan and caravan leisure battery banks.\u003c\/li\u003e\n  \u003cli\u003eBackup power and UPS systems where battery health tracking is required.\u003c\/li\u003e\n  \u003cli\u003eTelecom and remote site installations with 48V battery strings.\u003c\/li\u003e\n  \u003cli\u003eAny Victron system integrated with a GX device and VRM remote monitoring portal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-700 display unit\u003c\/li\u003e\n  \u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n  \u003cli\u003eRJ12 connection cable (display to shunt)\u003c\/li\u003e\n  \u003cli\u003eMounting hardware and panel cut-out template\u003c\/li\u003e\n  \u003cli\u003eQuick installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe shunt must be installed in the main negative cable of the battery bank, between the battery negative terminal and all other negative connections. All negative loads and charge sources must connect to the load side of the shunt, not directly to the battery, or readings will be inaccurate. The display unit is powered directly from the battery via the shunt connection. Installation in battery systems above 48V or in complex multi-bank configurations should be carried out by a qualified electrician or accredited installer. For lithium battery systems, verify compatibility with the battery BMS before installation. The VE.Direct port allows integration with Victron GX devices; no additional configuration software is required for standalone use.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855241478478,"sku":"BAM010700000","price":76.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM010700000_-_Battery_Monitor_BMV-700.webp?v=1781091729"},{"product_id":"victron-bmv-700-battery-monitor","title":"Victron Battery Monitor BMV-700 Retail - BAM010700000R","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy BMV-700 Battery Monitor\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-700 is a precision battery monitor designed for 12V, 24V and 48V battery systems. It measures state of charge, voltage, current, power consumption and time remaining, giving installers and system operators accurate, real-time data on battery health and usage. Suitable for off-grid solar, marine, motorhome and backup power installations.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDisplays state of charge (SOC) as a percentage, calculated from actual current flow rather than voltage estimation.\u003c\/li\u003e\n  \u003cli\u003eMeasures battery voltage, current (charge and discharge), power in watts, and time remaining at current load.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay output can trigger alarms or control external devices based on SOC, voltage or temperature thresholds.\u003c\/li\u003e\n  \u003cli\u003eBacklit display with intuitive rotary dial navigation, readable in low-light conditions.\u003c\/li\u003e\n  \u003cli\u003eConfigurable for a wide range of battery chemistries including lead-acid (flooded, AGM, gel) and lithium.\u003c\/li\u003e\n  \u003cli\u003eIncludes a 500A\/50mV shunt for accurate current measurement without interrupting the main battery circuit.\u003c\/li\u003e\n  \u003cli\u003eStores historical data including deepest discharge, average discharge, total charge cycles and cumulative energy throughput.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-700 uses a shunt-based measurement method, which means it monitors all current flowing in and out of the battery bank with high accuracy. Unlike voltage-only monitors, this approach accounts for the non-linear relationship between voltage and state of charge, particularly important for lithium batteries and heavily cycled lead-acid banks. The 500A shunt supplied is suitable for most residential and light commercial battery systems.\u003c\/p\u003e\n\n\u003cp\u003eThe monitor is configured via the front panel rotary dial and stores settings in non-volatile memory. Key parameters such as battery capacity, Peukert exponent, charge efficiency factor and tail current can all be adjusted to match the specific battery bank in use. This level of configurability makes the BMV-700 appropriate for professional installations where accuracy matters, not just as an indicative display.\u003c\/p\u003e\n\n\u003cp\u003eThe unit communicates via a VE.Direct port, which allows connection to Victron's GX devices, Victron Connect app (via a VE.Direct to USB or Bluetooth dongle, sold separately), and compatible MPPT solar charge controllers for system-wide monitoring.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: BAM010700000R\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076020073\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.627 kg\u003c\/li\u003e\n  \u003cli\u003eShunt rating: 500A \/ 50mV\u003c\/li\u003e\n  \u003cli\u003eCompatible battery voltages: 12V, 24V, 48V\u003c\/li\u003e\n  \u003cli\u003eCommunication: VE.Direct\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems requiring accurate battery state of charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat installations where battery management is critical to safe operation.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and campervan leisure battery systems.\u003c\/li\u003e\n  \u003cli\u003eBackup power and UPS systems with lead-acid or lithium battery banks.\u003c\/li\u003e\n  \u003cli\u003eTelecoms and remote site installations needing logged energy data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-700 display unit\u003c\/li\u003e\n  \u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n  \u003cli\u003eRJ12 connection cable (display to shunt)\u003c\/li\u003e\n  \u003cli\u003eTemperature sensor connection cable\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe shunt must be installed on the negative battery terminal, between the battery bank and all loads and charge sources. Incorrect shunt placement will result in inaccurate SOC readings. While the BMV-700 is a low-voltage device, it is typically installed as part of a larger battery system that may include high-current DC wiring. Installation should be carried out by a qualified electrician or experienced system integrator. For marine installations, compliance with relevant BMEA or RYA wiring standards is advisable.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855241609550,"sku":"BAM010700000R","price":75.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM010700000R_-_Battery_Monitor_BMV-700_Retail.webp?v=1781091738"},{"product_id":"victron-bmv-712-smart-battery-monitor","title":"Victron Battery Monitor BMV-712 Smart Retail - BAM030712000R","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy BMV-712 Smart Battery Monitor\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-712 Smart is a precision battery monitor for 12V, 24V and 48V systems. It measures state of charge, voltage, current, power and consumed amp-hours, and transmits all data wirelessly via Bluetooth to the VictronConnect app. It is suited to professional installers, off-grid system builders and anyone who needs accurate, real-time battery data without relying on a fixed display location.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in Bluetooth for direct connection to the VictronConnect app on iOS and Android, with no additional dongle required.\u003c\/li\u003e\n  \u003cli\u003eMeasures state of charge (SOC), voltage, current (up to 500A via included shunt), power in watts, and consumed amp-hours.\u003c\/li\u003e\n  \u003cli\u003eDual battery voltage monitoring: the second input can monitor an auxiliary battery, starter battery or midpoint voltage on a battery bank.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay output for high\/low voltage alarms, SOC thresholds or temperature-triggered switching.\u003c\/li\u003e\n  \u003cli\u003eBacklit display with rotary control for direct readout without a phone or app.\u003c\/li\u003e\n  \u003cli\u003eCompatible with VRM (Victron Remote Management) portal when connected to a GX device, enabling remote monitoring over the internet.\u003c\/li\u003e\n  \u003cli\u003eSynchronises with other Victron devices over VE.Smart Networking, sharing battery data across the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-712 uses a 500A\/50mV shunt to measure current flowing in and out of the battery. From this, it calculates state of charge using a coulomb-counting method, which is more accurate than voltage-based estimation, particularly under load or during partial charge cycles. The monitor tracks historical data including the number of charge cycles, deepest discharge, average discharge and time since last full charge, all accessible via the display or VictronConnect.\u003c\/p\u003e\n\n\u003cp\u003eThe integrated Bluetooth module (Bluetooth Smart) allows configuration and monitoring directly from a smartphone. Parameters such as battery capacity, Peukert exponent, charge efficiency factor and tail current can all be set through VictronConnect without opening a panel or using a laptop. This makes commissioning and ongoing adjustment straightforward on installed systems.\u003c\/p\u003e\n\n\u003cp\u003eThe programmable relay is a practical feature for real installations. It can be configured to trigger an alarm, start a generator, or disconnect a load based on SOC, voltage or temperature thresholds. The auxiliary input adds flexibility for dual-battery setups common in marine, vehicle and off-grid applications, where monitoring a starter battery alongside a house bank is a standard requirement.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: BAM030712000R\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076037798\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.627 kg\u003c\/li\u003e\n  \u003cli\u003eShunt rating: 500A \/ 50mV (included)\u003c\/li\u003e\n  \u003cli\u003eCompatible battery voltages: 12V, 24V, 48V\u003c\/li\u003e\n  \u003cli\u003eWireless connectivity: Bluetooth Smart (BLE)\u003c\/li\u003e\n  \u003cli\u003eApp compatibility: VictronConnect (iOS and Android)\u003c\/li\u003e\n  \u003cli\u003eDisplay: Backlit LCD with rotary encoder\u003c\/li\u003e\n  \u003cli\u003eAuxiliary input: Second voltage measurement (starter battery, midpoint or temperature with optional sensor)\u003c\/li\u003e\n  \u003cli\u003eRelay output: Programmable, single-pole\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems requiring accurate battery state of charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine installations with dual-battery setups (house bank and starter battery).\u003c\/li\u003e\n  \u003cli\u003eMotorhome and campervan leisure battery monitoring.\u003c\/li\u003e\n  \u003cli\u003eBackup power and UPS systems where battery health tracking is critical.\u003c\/li\u003e\n  \u003cli\u003eCommercial off-grid installations integrated with Victron GX devices and VRM remote monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-712 Smart display unit\u003c\/li\u003e\n  \u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n  \u003cli\u003e10 metre connection cable (between shunt and display)\u003c\/li\u003e\n  \u003cli\u003eTemperature sensor connection capability (sensor sold separately)\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe BMV-712 shunt must be installed on the negative conductor between the battery negative terminal and all other negative connections in the system. Incorrect shunt placement will result in inaccurate readings. While the unit itself is low-voltage and does not require a certified electrician for basic installation, it should be fitted as part of a professionally designed system. For off-grid solar or marine installations, a qualified installer familiar with Victron system architecture is recommended. No G98 or G99 grid compliance is applicable to this product.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855241707854,"sku":"BAM030712000R","price":106.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM030712000R_-_Battery_Monitor_BMV-712_Smart_Retail.webp?v=1781091746"},{"product_id":"victron-bmv-702-battery-monitor","title":"Victron Battery Monitor BMV-702 Retail - BAM010702000R","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy BMV-702 Battery Monitor (Retail)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-702 is a precision battery monitor designed for 12V, 24V and 48V battery systems. It measures state of charge, voltage, current, power consumption and time remaining, giving installers and system operators accurate, real-time data on battery health and capacity. It is suited to off-grid solar systems, marine installations, motorhomes and any application where reliable battery monitoring is essential.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDisplays state of charge (SOC) as a percentage, with high accuracy based on Peukert-corrected ampere-hour counting.\u003c\/li\u003e\n  \u003cli\u003eMeasures voltage, current (up to 500A via included shunt), power in watts and consumed amp-hours.\u003c\/li\u003e\n  \u003cli\u003eCalculates time-to-go based on current discharge rate, giving a realistic remaining runtime estimate.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay output for triggering alarms or loads based on SOC, voltage or temperature thresholds.\u003c\/li\u003e\n  \u003cli\u003eBacklit display with intuitive rotary dial navigation, readable in low-light conditions.\u003c\/li\u003e\n  \u003cli\u003eSupports a wide range of battery chemistries including lead-acid (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n  \u003cli\u003eConfigurable via the free VictronConnect app over Bluetooth when used with an optional VE.Direct Bluetooth Smart dongle.\u003c\/li\u003e\n  \u003cli\u003eMidpoint voltage monitoring capability to detect cell or battery imbalance in series battery banks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-702 uses a 500A\/50mV shunt to measure all current flowing in and out of the battery bank. By tracking charge and discharge cycles with Peukert compensation applied, it maintains an accurate state of charge figure even as battery capacity changes with temperature and discharge rate. This is a meaningful improvement over simple voltage-based SOC estimation, which is unreliable under load.\u003c\/p\u003e\n\n\u003cp\u003eThe programmable relay is a practical feature for professional installations. It can be configured to switch at defined SOC or voltage thresholds, making it useful for load shedding, generator start signals or low-battery alarms. The midpoint voltage monitoring function is particularly valuable in larger 24V or 48V series battery banks, where individual battery degradation can go undetected without dedicated monitoring.\u003c\/p\u003e\n\n\u003cp\u003eThis is the retail-boxed version, supplied with the 500A shunt, display unit, cabling and mounting hardware. The BMV-702 connects to the battery via the shunt and to the display via a CAT5 cable. VE.Direct port allows integration with Victron GX devices, MPPT solar charge controllers and the VRM online monitoring portal.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: BAM010702000R\u003c\/li\u003e\n  \u003cli\u003eCompatible system voltages: 12V, 24V, 48V\u003c\/li\u003e\n  \u003cli\u003eShunt rating: 500A \/ 50mV\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.627 kg (retail box)\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076020103\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar PV systems with battery storage requiring accurate SOC tracking.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat installations where battery capacity management is critical.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and campervan leisure battery systems.\u003c\/li\u003e\n  \u003cli\u003eBackup power and UPS systems where remaining runtime must be known.\u003c\/li\u003e\n  \u003cli\u003eLarge series battery banks (24V or 48V) where midpoint voltage monitoring is needed to detect imbalance.\u003c\/li\u003e\n  \u003cli\u003eSystems integrated with Victron GX devices for remote monitoring via the VRM portal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-702 display unit\u003c\/li\u003e\n  \u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n  \u003cli\u003eCAT5 connection cable (display to shunt)\u003c\/li\u003e\n  \u003cli\u003eMounting hardware and battery connection cables\u003c\/li\u003e\n  \u003cli\u003eRetail packaging with installation documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe BMV-702 shunt must be installed on the negative battery terminal, with all negative loads and charge sources connected to the load side of the shunt. Incorrect wiring will result in inaccurate readings. Installation in battery systems above 48V is not supported. For integration into larger Victron systems or commercial off-grid installations, a qualified electrician or MCS-accredited installer is recommended. The VE.Direct port allows connection to Victron GX devices; a VE.Direct cable is not included and must be sourced separately if required.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855390900558,"sku":"BAM010702000R","price":95.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM010702000R_-_Battery_Monitor_BMV-702_Retail.webp?v=1781094235"},{"product_id":"victron-bmv-712-black-smart-battery-monitor","title":"Victron Battery Monitor BMV-712 BLACK Smart - BAM030712200","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron BMV-712 BLACK Smart Battery Monitor\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-712 BLACK Smart is a precision battery monitor designed for 12V, 24V and 48V battery systems. It measures state of charge, voltage, current, power, consumed amp-hours and time remaining, giving installers and system operators a clear, accurate picture of battery status. The integrated Bluetooth module allows wireless monitoring via the Victron Connect app on iOS and Android devices.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitors state of charge, voltage, current, power, consumed amp-hours and time-to-go on a single backlit display.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in Bluetooth Smart (BLE) for wireless connection to the VictronConnect app on iOS and Android.\u003c\/li\u003e\n  \u003cli\u003eMeasures a second voltage input, allowing simultaneous monitoring of a starter battery or solar input alongside the main bank.\u003c\/li\u003e\n  \u003cli\u003eConfigurable relay output that can trigger alarms or control external devices based on programmable thresholds.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all battery chemistries including lead-acid (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n  \u003cli\u003eSupplied in black housing, matching black panel and switchgear installations.\u003c\/li\u003e\n  \u003cli\u003eData logging and historical trend data accessible through VictronConnect without additional hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-712 uses a precision shunt (supplied in the box) to measure current flowing in and out of the battery bank. From this, it calculates state of charge as a percentage, consumed amp-hours and an estimated time remaining at the current discharge rate. Accurate state of charge tracking depends on correct configuration of battery capacity, Peukert exponent and charge efficiency factor. These parameters are set via the display or through VictronConnect, which also provides a clear interface for monitoring live data and reviewing historical logs.\u003c\/p\u003e\n\n\u003cp\u003eThe second voltage input is a practical feature for marine, motorhome and off-grid installations where a starter battery or auxiliary bank needs to be watched alongside the main house bank. The programmable relay can be configured to activate at a defined state of charge or voltage threshold, making it straightforward to wire in a low-battery alarm, a load disconnect signal or a generator start trigger. The relay is a dry contact rated for low-current switching.\u003c\/p\u003e\n\n\u003cp\u003eBluetooth connectivity is built in, so no additional dongle or interface is required. The VictronConnect app provides full configuration access and displays all monitored values in real time. The BMV-712 can also be integrated into a wider Victron system via a VE.Direct port, connecting to a GX device such as the Cerbo GX for centralised monitoring and data logging.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBAM030712200\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSupported Battery Voltages\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e12V, 24V, 48V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eShunt Rating\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e500A \/ 50mV (included)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eVoltage Measurement Range\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e0 to 70V DC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCurrent Measurement Range\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e±500A (with supplied shunt)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eConnectivity\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBluetooth Smart (BLE), VE.Direct\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eRelay Output\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eProgrammable, dry contact\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eDisplay\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBacklit LCD\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eHousing Colour\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBlack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e0.627 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076049517\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems requiring accurate battery state of charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine installations monitoring a house bank and starter battery simultaneously.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and campervan leisure battery systems with Bluetooth remote monitoring.\u003c\/li\u003e\n  \u003cli\u003eBackup power and UPS systems where battery health visibility is critical.\u003c\/li\u003e\n  \u003cli\u003eLithium battery installations (LiFePO4) requiring precise coulomb counting.\u003c\/li\u003e\n  \u003cli\u003eSystems integrated with a Victron GX device for centralised SCADA-style monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-712 BLACK Smart monitor head unit\u003c\/li\u003e\n  \u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n  \u003cli\u003e10 metre connection cable (monitor to shunt)\u003c\/li\u003e\n  \u003cli\u003eBattery cable with fuse holder\u003c\/li\u003e\n  \u003cli\u003eTemperature sensor\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe BMV-712 shunt must be installed on the negative side of the battery bank, with all negative loads and charge sources connected to the load side of the shunt. Incorrect wiring will produce inaccurate readings. The unit is suitable for installation by a competent electrician or qualified solar installer. For systems integrated into a wider off-grid or hybrid installation, connection to a GX device via VE.Direct should be carried out by an installer familiar with Victron system architecture. Battery chemistry parameters must be correctly configured after installation to ensure accurate state of charge calculations.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855391359310,"sku":"BAM030712200","price":109.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM030712200_-_Battery_Monitor_BMV-712_BLACK_Smart.webp?v=1781094240"},{"product_id":"victron-smartshunt-1000a-50mv-ip65","title":"Victron SmartShunt 1000A\/50mV IP65 - SHU065210050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron SmartShunt 1000A\/50mV IP65\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron SmartShunt 1000A\/50mV IP65 is a standalone battery monitor that measures current, voltage, power, state of charge, time to go, and historical data without requiring a dedicated display unit. It connects to the VictronConnect app via Bluetooth, making it well suited to installations where a panel-mounted display is impractical or unnecessary. The IP65 rating makes it suitable for use in damp or dusty environments.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1000A continuous current measurement with a 50mV shunt drop, suitable for large battery banks in off-grid, marine and vehicle installations.\u003c\/li\u003e\n  \u003cli\u003eIP65-rated enclosure provides protection against dust ingress and low-pressure water jets, extending the range of suitable installation locations.\u003c\/li\u003e\n  \u003cli\u003eBluetooth connectivity built in: configure and monitor via the VictronConnect app on iOS or Android with no additional hardware required.\u003c\/li\u003e\n  \u003cli\u003eMonitors state of charge, voltage, current, power consumption, and time remaining on a single device with no external display needed.\u003c\/li\u003e\n  \u003cli\u003eStores historical data including deepest discharge, average discharge, total charge cycles, and cumulative energy throughput.\u003c\/li\u003e\n  \u003cli\u003eCompatible with the VE.Direct port for integration with Victron GX devices, MPPT solar charge controllers, and the VRM online monitoring portal.\u003c\/li\u003e\n  \u003cli\u003eSupports a wide battery voltage range and is compatible with all common battery chemistries including lithium, AGM, gel and flooded lead-acid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt replaces a traditional shunt-and-display combination by integrating all monitoring electronics directly into the shunt body. All configuration is handled through VictronConnect, where you set battery capacity, charge efficiency, Peukert exponent, and charge floor to match your specific battery bank. Once configured, the device runs independently and logs data continuously, whether or not a phone or tablet is connected.\u003c\/p\u003e\n\n\u003cp\u003eThe 1000A rating makes this variant appropriate for larger systems: high-capacity lithium battery banks, parallel battery configurations, or installations with significant DC loads such as inverters, bow thrusters or electric drives. The 50mV shunt voltage drop is standard for this current class and keeps resistive losses negligible at typical operating currents. The VE.Direct port allows the SmartShunt to feed battery data directly into a Victron Cerbo GX or other GX device, making it a straightforward addition to any Victron-based system architecture.\u003c\/p\u003e\n\n\u003cp\u003eThe IP65 rating distinguishes this model from the standard SmartShunt variants. It is particularly relevant in engine bays, bilges, caravans and outdoor battery enclosures where condensation or splash exposure is a realistic concern. The housing is sealed to prevent moisture and particulate ingress without compromising access to the VE.Direct port or the Bluetooth antenna performance.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHU065210050\u003c\/li\u003e\n  \u003cli\u003eCurrent rating: 1000A continuous\u003c\/li\u003e\n  \u003cli\u003eShunt voltage drop: 50mV\u003c\/li\u003e\n  \u003cli\u003eIP rating: IP65\u003c\/li\u003e\n  \u003cli\u003eConnectivity: Bluetooth (VictronConnect) and VE.Direct\u003c\/li\u003e\n  \u003cli\u003eWeight: 1.22 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076057901\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems with large lithium or lead-acid battery banks requiring accurate state-of-charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine installations including narrowboats, yachts and motorboats where moisture exposure makes IP65 protection necessary.\u003c\/li\u003e\n  \u003cli\u003eMotorhome, campervan and caravan leisure battery systems with high-current inverter or appliance loads.\u003c\/li\u003e\n  \u003cli\u003eCommercial vehicle auxiliary power systems and refrigerated transport battery monitoring.\u003c\/li\u003e\n  \u003cli\u003eVictron GX-based energy management systems where battery data needs to feed into VRM remote monitoring.\u003c\/li\u003e\n  \u003cli\u003eIndustrial or telecoms battery backup installations in partially exposed or dusty environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron SmartShunt 1000A\/50mV IP65\u003c\/li\u003e\n  \u003cli\u003eVE.Direct cable (check Victron packaging for included accessories)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt must be installed in the negative battery lead, between the battery negative terminal and all other negative connections in the system. Incorrect wiring will produce inaccurate readings. For systems connected to shore power, generators or solar charge controllers, all charge sources must be accounted for in the wiring to ensure accurate current measurement. Installation in 12V, 24V and 48V DC systems should be carried out by a competent electrician or qualified installer familiar with battery systems. For marine installations, compliance with relevant NMEA or RCD Directive requirements should be confirmed with the installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855400108366,"sku":"SHU065210050","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHU065210050_-_SmartShunt_1000A-50mV_IP65.webp?v=1781094383"},{"product_id":"victron-bmv-712-black-smart-battery-monitorr","title":"Victron Battery Monitor BMV-712 BLACK Smart Retail - BAM030712200R","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron BMV-712 BLACK Smart Battery Monitor (Retail)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-712 BLACK Smart is a precision battery monitor designed for professional solar, off-grid and marine installations. It measures state of charge, voltage, current, power and consumed amp-hours, transmitting data via built-in Bluetooth to the VictronConnect app. The black finish suits installations where aesthetics matter alongside function.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in Bluetooth for direct connection to the VictronConnect app on iOS and Android, with no dongle required.\u003c\/li\u003e\n  \u003cli\u003eMeasures battery state of charge (%), voltage, current (amps), power (watts) and consumed amp-hours.\u003c\/li\u003e\n  \u003cli\u003eMonitors a second voltage input, suitable for tracking a starter battery or solar panel voltage alongside the main bank.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay output that can trigger on state of charge, voltage or temperature thresholds.\u003c\/li\u003e\n  \u003cli\u003eHigh-contrast backlit display with clear readout of all key parameters directly on the unit.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all battery chemistries including lead-acid (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n  \u003cli\u003eSupplied as a retail kit including the shunt, cabling and display unit, ready for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-712 uses a precision shunt to measure all current flowing in and out of the battery bank. From this, it calculates state of charge using a Peukert-corrected algorithm that accounts for charge efficiency and self-discharge. This gives a far more accurate picture of remaining capacity than a simple voltage reading, which is particularly important for lithium batteries where the voltage curve is relatively flat across most of the charge range.\u003c\/p\u003e\n\n\u003cp\u003eThe integrated Bluetooth module connects directly to the VictronConnect app, where you can view live data, configure all parameters and review historical trends including deepest discharge, average discharge and number of charge cycles. The BMV-712 also integrates with the wider Victron ecosystem: it can be connected to a GX device (such as the Cerbo GX) for system-level monitoring and remote access via VRM. The programmable relay adds a layer of protection automation, allowing the unit to disconnect loads or trigger an alarm based on configurable thresholds.\u003c\/p\u003e\n\n\u003cp\u003eThe black version is functionally identical to the standard silver BMV-712 Smart. It is the retail-packaged variant, supplied with all accessories needed for a complete installation.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: BAM030712200R\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076049524\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.627 kg\u003c\/li\u003e\n  \u003cli\u003eColour: Black\u003c\/li\u003e\n  \u003cli\u003eConnectivity: Bluetooth (VictronConnect)\u003c\/li\u003e\n  \u003cli\u003eDisplay: Backlit LCD\u003c\/li\u003e\n  \u003cli\u003eCompatible chemistries: Lead-acid (AGM, gel, flooded), LiFePO4 and other lithium types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems requiring accurate battery state of charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat installations where dual-battery monitoring (house bank and starter battery) is needed.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and campervan leisure battery systems.\u003c\/li\u003e\n  \u003cli\u003eBackup power and UPS systems with lead-acid or lithium battery banks.\u003c\/li\u003e\n  \u003cli\u003eCommercial and industrial off-grid installations integrated with Victron GX monitoring equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-712 BLACK Smart display unit\u003c\/li\u003e\n  \u003cli\u003e500A\/50mV precision shunt\u003c\/li\u003e\n  \u003cli\u003e10-metre RJ12 cable (shunt to display)\u003c\/li\u003e\n  \u003cli\u003eTemperature sensor\u003c\/li\u003e\n  \u003cli\u003eFused battery cable\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe BMV-712 shunt must be installed on the negative side of the battery bank, with all negative loads and charge sources connected to the load side of the shunt. Incorrect wiring will produce inaccurate readings. While the unit itself is low-voltage and does not require specialist certification to install, it is typically fitted as part of a wider battery or solar system. For any grid-connected or high-voltage battery installations, use a qualified electrician or MCS-accredited installer. Ensure the battery chemistry and capacity settings are correctly configured in VictronConnect before commissioning.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855420522830,"sku":"BAM030712200R","price":96.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM030712200R_-_Battery_Monitor_BMV-712_BLACK_Smart_Retail.webp?v=1781094634"},{"product_id":"victron-bmv-702-battery-monitor-black","title":"Victron Battery Monitor BMV-702 BLACK - BAM010702200","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy BMV-702 Battery Monitor (Black)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-702 is a precision battery monitor designed for 12V, 24V and 48V battery systems. It measures state of charge, voltage, current, power consumption and time remaining, giving installers and system operators accurate, real-time data on battery health and usage. It is suited to off-grid solar, marine, motorhome and backup power installations where reliable battery monitoring is essential.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDisplays state of charge (%), voltage, current (amps), consumed amp-hours, instantaneous power (watts) and time remaining.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 12V, 24V and 48V battery systems, including lead-acid (AGM, gel, flooded) and lithium chemistries.\u003c\/li\u003e\n  \u003cli\u003eHigh-accuracy current measurement via a dedicated 500A shunt (included), with a resolution of 10mA for precise low-current readings.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay output that can trigger alarms or control external devices based on configurable thresholds.\u003c\/li\u003e\n  \u003cli\u003eBacklit display with intuitive button navigation; no smartphone or app required for basic operation.\u003c\/li\u003e\n  \u003cli\u003eBluetooth connectivity available via optional VE.Direct Bluetooth Smart dongle, enabling monitoring through the Victron Connect app.\u003c\/li\u003e\n  \u003cli\u003eVE.Direct port for integration with Victron GX devices, MPPT solar charge controllers and other compatible equipment.\u003c\/li\u003e\n  \u003cli\u003eBlack housing finish for installations where aesthetics matter, such as yacht interiors or motorhome cabins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-702 builds on the original BMV-700 by adding a second voltage input, which allows simultaneous monitoring of a starter battery or mid-point voltage in a series battery bank. This is particularly useful on marine and vehicle installations where the house bank and starter battery need to be watched independently. The second input does not require an additional shunt; it connects directly to the terminal.\u003c\/p\u003e\n\n\u003cp\u003eAccurate state of charge calculation depends on correctly configured battery capacity and charge efficiency settings. The BMV-702 allows full customisation of these parameters, including Peukert exponent and charge efficiency factor, so readings remain accurate across different battery chemistries and usage patterns. The programmable relay can be set to activate on low state of charge, low voltage, high voltage or other conditions, making it straightforward to wire in an alarm or automatic load disconnect.\u003c\/p\u003e\n\n\u003cp\u003eThe VE.Direct port means the BMV-702 integrates directly into a Victron system managed by a Cerbo GX or Venus GX, where its data appears on the system overview alongside solar yield, inverter status and grid information. This makes it a practical choice for any Victron-based installation rather than a standalone instrument.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: BAM010702200\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076020110\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.627 kg\u003c\/li\u003e\n  \u003cli\u003eHousing colour: Black\u003c\/li\u003e\n  \u003cli\u003eShunt included: 500A \/ 50mV\u003c\/li\u003e\n  \u003cli\u003eCompatible battery voltages: 12V, 24V, 48V\u003c\/li\u003e\n  \u003cli\u003eCommunication: VE.Direct port\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar installations requiring accurate battery state of charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine and yacht installations with separate house and starter battery banks.\u003c\/li\u003e\n  \u003cli\u003eMotorhomes, campervans and leisure vehicles with 12V or 24V house batteries.\u003c\/li\u003e\n  \u003cli\u003eBackup power and UPS systems where battery condition needs continuous monitoring.\u003c\/li\u003e\n  \u003cli\u003eVictron-based energy systems integrated with GX monitoring devices.\u003c\/li\u003e\n  \u003cli\u003eTelecom and remote site installations with 48V battery banks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-702 display unit (black)\u003c\/li\u003e\n  \u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n  \u003cli\u003e10-metre RJ12 cable (display to shunt)\u003c\/li\u003e\n  \u003cli\u003eTemperature sensor\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe BMV-702 shunt must be installed on the negative conductor of the battery bank, with all loads and charge sources connected to the load side of the shunt. Incorrect wiring will produce inaccurate readings. While the unit itself is low voltage and does not require specialist certification to install, it is typically fitted as part of a wider battery or solar system. For any installation involving mains-connected inverters, grid-tied equipment or high-capacity lithium battery systems, a qualified electrician or MCS-accredited installer should carry out the work. Ensure the battery chemistry and capacity settings are correctly programmed after installation to achieve accurate state of charge readings.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59856047407438,"sku":"BAM010702200","price":95.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM010702200_-_Battery_Monitor_BMV-702_BLACK.webp?v=1781101903"},{"product_id":"victron-battery-monitor-bmv-702","title":"Victron Battery Monitor BMV-702 - BAM010702000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Battery Monitor BMV-702\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-702 is a precision battery monitor designed for 12V, 24V and 48V battery systems. It gives installers and system operators accurate, real-time data on state of charge, voltage, current and consumed amp hours. It is suited to off-grid solar systems, marine installations, motorhomes and any application where reliable battery monitoring is essential.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDisplays state of charge (SOC) as a percentage, updated continuously based on measured current flow.\u003c\/li\u003e\n  \u003cli\u003eMonitors battery voltage, current draw and consumed amp hours simultaneously.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 12V, 24V and 48V battery banks, covering the majority of off-grid and mobile system configurations.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay output for high or low voltage alarms, SOC thresholds or other user-defined triggers.\u003c\/li\u003e\n  \u003cli\u003eBacklit display with clear, easy-to-read readouts suitable for low-light environments such as boat cabins or van interiors.\u003c\/li\u003e\n  \u003cli\u003eIncludes a 500A shunt for accurate current measurement without the need for additional hardware.\u003c\/li\u003e\n  \u003cli\u003eConnects to the VictronConnect app via optional Bluetooth dongle for remote monitoring and configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-702 works by measuring the current flowing in and out of the battery bank through a precision shunt resistor. By integrating this current over time, it calculates consumed amp hours and derives state of charge. This method is significantly more accurate than voltage-based SOC estimation, which is unreliable under load or during charging.\u003c\/p\u003e\n\n\u003cp\u003eThe programmable relay is a practical feature for system protection. It can be configured to trigger an alarm or disconnect a load when the battery reaches a defined SOC or voltage threshold, helping to prevent deep discharge damage. The BMV-702 also records historical data including the number of charge cycles, deepest discharge and average discharge, which is useful for system diagnostics and battery health assessment.\u003c\/p\u003e\n\n\u003cp\u003eThe unit supports a second voltage input, allowing simultaneous monitoring of a starter battery or auxiliary battery alongside the main bank. This makes it particularly useful in marine and vehicle installations where two separate batteries need to be tracked.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: BAM010702000\u003c\/li\u003e\n  \u003cli\u003eCompatible battery voltages: 12V, 24V, 48V\u003c\/li\u003e\n  \u003cli\u003eShunt rating: 500A included\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.627 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076020097\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar battery systems requiring accurate SOC monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine installations with single or dual battery banks.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and campervan leisure battery monitoring.\u003c\/li\u003e\n  \u003cli\u003eTelecoms and remote power systems where battery health data is critical.\u003c\/li\u003e\n  \u003cli\u003eIndustrial backup power installations with 12V, 24V or 48V battery banks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-702 battery monitor display unit\u003c\/li\u003e\n  \u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n  \u003cli\u003e10 metre connection cable between shunt and display\u003c\/li\u003e\n  \u003cli\u003eMounting hardware and installation accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe BMV-702 shunt must be installed on the negative conductor of the battery bank, with all negative loads and charge sources connected to the load side of the shunt. Incorrect wiring will result in inaccurate readings. Installation should be carried out by a qualified electrician or experienced system installer. For off-grid solar systems, ensure the shunt is correctly positioned before commissioning the charge controller or inverter. The unit is not intended for grid-connected metering applications.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863665279310,"sku":"BAM010702000","price":92.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM010702000_-_Battery_Monitor_BMV-702.webp?v=1781183118"},{"product_id":"victron-pcba-shunt-bmv-602s-700-702-712","title":"Victron PCBA for shunt BMV 602S\/700\/702\/712 - SPR00053","description":"\u003ch1 style=\"color: #f87c24;\"\u003ePCBA for Shunt BMV 602S \/ 700 \/ 702 \/ 712\u003c\/h1\u003e\n\n\u003cp\u003eThis is the replacement printed circuit board assembly (PCBA) for the shunt unit used in Victron Energy BMV 602S, BMV 700, BMV 702 and BMV 712 battery monitors. It is a direct OEM spare part, intended for repair or replacement of a faulty shunt PCB in an existing installation.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement PCBA for the shunt unit across four Victron BMV battery monitor models: 602S, 700, 702 and 712.\u003c\/li\u003e\n  \u003cli\u003eOEM Victron Energy component, ensuring compatibility with the original shunt housing and wiring harness.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.012 kg, making it straightforward to handle during bench repair or on-site replacement.\u003c\/li\u003e\n  \u003cli\u003eSKU SPR00053, GTIN 8719076031710, for accurate ordering and stock verification.\u003c\/li\u003e\n  \u003cli\u003eAllows repair of a faulty shunt unit without replacing the entire battery monitor assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe PCBA (Printed Circuit Board Assembly) is the active electronic component housed within the BMV shunt unit. It handles the signal processing between the shunt resistor and the main BMV display or SmartShunt head unit. When a shunt unit fails due to electrical damage, moisture ingress or component failure, replacing the PCBA is often the most cost-effective repair path rather than sourcing a complete new monitor.\u003c\/p\u003e\n\n\u003cp\u003eThis part is compatible with the BMV 602S, 700, 702 and 712 models. These monitors share a common shunt housing design, and this PCBA is the correct replacement board for all four variants. It is an OEM Victron part, so it matches the original specification without any modification to the shunt body or cabling.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SPR00053\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076031710\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.012 kg\u003c\/li\u003e\n  \u003cli\u003eCompatible models: BMV 602S, BMV 700, BMV 702, BMV 712\u003c\/li\u003e\n  \u003cli\u003eComponent type: Printed Circuit Board Assembly (PCBA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRepair of a damaged or failed shunt unit in a BMV 602S, 700, 702 or 712 battery monitor installation.\u003c\/li\u003e\n  \u003cli\u003eReplacement following electrical fault, overvoltage event or moisture damage to the shunt PCB.\u003c\/li\u003e\n  \u003cli\u003eSpare parts stock for solar installers and service engineers maintaining Victron battery monitor installations.\u003c\/li\u003e\n  \u003cli\u003eWorkshop repair of returned or faulty BMV shunt units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x PCBA for BMV 602S \/ 700 \/ 702 \/ 712 shunt unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis component is intended for installation by qualified technicians familiar with Victron BMV battery monitor hardware. Work on battery monitor shunt units involves connections to live battery circuits. Ensure the battery is safely isolated before beginning any repair. If you are unsure whether this is the correct part for your specific unit, verify the model number on your existing BMV display or shunt housing before ordering.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863718134094,"sku":"SPR00053","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SPR00053_-_PCBA_for_shunt_BMV_602S-700-702-712.webp?v=1781184084"},{"product_id":"victron-smartshunt-2000a-50mv-ip65","title":"Victron SmartShunt 2000A\/50mV IP65 - SHU065220050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron SmartShunt 2000A\/50mV IP65\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron SmartShunt 2000A\/50mV IP65 is a standalone battery monitor designed for high-current applications where accurate state-of-charge tracking is essential. It connects to the Victron Connect app via Bluetooth, making it suitable for off-grid systems, large battery banks, and commercial installations where a dedicated display unit is not required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2000A continuous current rating with a 50mV shunt drop, suitable for large battery banks and high-draw systems.\u003c\/li\u003e\n  \u003cli\u003eIP65-rated enclosure provides protection against dust ingress and low-pressure water jets, allowing installation in exposed or outdoor-adjacent locations.\u003c\/li\u003e\n  \u003cli\u003eBluetooth connectivity built in, with full monitoring and configuration available through the Victron Connect app on iOS and Android.\u003c\/li\u003e\n  \u003cli\u003eMonitors state of charge, voltage, current, power, consumed amp-hours, and time remaining on the battery.\u003c\/li\u003e\n  \u003cli\u003eSupports a wide range of battery chemistries including lead-acid (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n  \u003cli\u003eVE.Direct port allows integration with the Victron ecosystem, including GX devices, MPPT solar chargers, and Venus OS installations.\u003c\/li\u003e\n  \u003cli\u003eNo display unit required: all data is accessible via the Victron Connect app, reducing installation complexity and cost.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt functions as a drop-in battery monitor by measuring the voltage drop across a precision shunt resistor to calculate current flow. At 2000A, this unit is rated for systems well beyond typical residential scale, covering large off-grid installations, marine vessels with high electrical loads, and commercial battery storage setups. The 50mV shunt drop is a standard value that balances measurement accuracy with acceptable power dissipation at high currents.\u003c\/p\u003e\n\n\u003cp\u003eThe IP65 rating distinguishes this model from the standard SmartShunt range. It means the unit can be installed in locations subject to dust and occasional water spray, such as engine rooms, battery compartments with poor ventilation, or outdoor enclosures. This makes it a practical choice where a standard IP20 or unrated unit would not be appropriate.\u003c\/p\u003e\n\n\u003cp\u003eIntegration with the Victron ecosystem is handled through the VE.Direct port. When connected to a Cerbo GX or other GX device, the SmartShunt feeds battery data into the Venus OS dashboard and can be monitored remotely via the VRM portal. This makes it a reliable data source in larger multi-device installations rather than a standalone instrument only.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHU065220050\u003c\/li\u003e\n  \u003cli\u003eCurrent rating: 2000A continuous\u003c\/li\u003e\n  \u003cli\u003eShunt drop: 50mV\u003c\/li\u003e\n  \u003cli\u003eIP rating: IP65\u003c\/li\u003e\n  \u003cli\u003eConnectivity: Bluetooth (Victron Connect app), VE.Direct\u003c\/li\u003e\n  \u003cli\u003eWeight: 2.22 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076057918\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge off-grid solar installations with high-capacity battery banks requiring accurate state-of-charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat electrical systems with high continuous current demands.\u003c\/li\u003e\n  \u003cli\u003eCommercial and industrial battery storage systems integrated with Victron GX devices and VRM remote monitoring.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and coach conversions with large lithium or lead-acid battery banks.\u003c\/li\u003e\n  \u003cli\u003eInstallations in damp or dusty environments where an IP65-rated component is specified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Victron SmartShunt 2000A\/50mV IP65 unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe SmartShunt must be installed in the negative battery cable between the battery negative terminal and all other negative connections in the system. Incorrect wiring will produce inaccurate readings. At 2000A, the associated cabling, fusing, and busbar connections must be rated appropriately for the system's maximum current. Installation should be carried out by a qualified electrician or experienced system integrator familiar with high-current DC systems. For systems incorporating lithium batteries or grid-connected elements, ensure all relevant safety and compliance requirements are met before commissioning.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59866759266638,"sku":"SHU065220050","price":172.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHU065220050_-_SmartShunt_2000A-50mV_IP65.webp?v=1781200507"},{"product_id":"victron-bmv-700h-battery-monitor","title":"Victron Battery Monitor BMV-700H - BAM010700100","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy BMV-700H High Voltage Battery Monitor\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy BMV-700H is a high precision battery monitor built specifically for high voltage battery systems operating between 60 and 385 VDC. It measures voltage, current, power, consumed ampere hours and state of charge, giving system operators accurate real time data on battery condition and remaining runtime. Supplied complete with a 500A\/50mV shunt in a dedicated high voltage enclosure, connection cabling and mounting hardware, it is ready to install without additional components.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for high voltage battery banks from 60 to 385 VDC.\u003c\/li\u003e\n  \u003cli\u003eDisplays battery voltage, current, power, ampere hours consumed and state of charge.\u003c\/li\u003e\n  \u003cli\u003eCalculates remaining time at the current rate of discharge.\u003c\/li\u003e\n  \u003cli\u003eProgrammable visual and audible alarm.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay to disconnect non critical loads or start a generator when required.\u003c\/li\u003e\n  \u003cli\u003e500A quick connect shunt supplied in a purpose built high voltage enclosure.\u003c\/li\u003e\n  \u003cli\u003eShunt selection capability up to 10,000A for larger installations.\u003c\/li\u003e\n  \u003cli\u003eHigh current measurement resolution of 10 mA (0.01A).\u003c\/li\u003e\n  \u003cli\u003eStores detailed historical data for evaluating usage patterns and battery health.\u003c\/li\u003e\n  \u003cli\u003eVE.Direct communication port for connection to Victron GX devices and the VRM online portal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-700H tracks the state of charge of a battery bank by integrating the current flowing in and out of the battery through a precision shunt. Rather than simple ampere hour counting, it applies Peukert compensation and charge efficiency factors so that the readings reflect real world battery behaviour under load. In systems where deep discharge shortens battery life and replacement costs are significant, this level of accuracy is what protects the investment in the battery bank.\u003c\/p\u003e\n\n\u003cp\u003eThe \"H\" designation identifies this as the high voltage member of the BMV-700 family. Where the standard BMV-700 covers conventional 12V, 24V and 48V installations, the BMV-700H is intended for traction battery packs, high voltage industrial banks and other systems operating well above standard low voltage DC. Because of the higher working voltage, the supplied shunt is housed in a dedicated enclosure suitable for the application.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is straightforward. All electrical connections are made to the quick connect PCB on the current shunt, and the shunt connects to the display head with a standard RJ12 cable. The supplied 10 metre RJ12 cable and 2 metre fused battery cable are all that is required, with no additional components needed. The unit ships with both round and square front bezels, a securing ring for rear mounting and screws for front mounting, so it can be fitted neatly into a panel or enclosure in either style.\u003c\/p\u003e\n\n\u003cp\u003eThe VE.Direct port allows the BMV-700H to pass live data to a Victron GX device, making the battery bank visible alongside the rest of the system through the VRM online portal. For remote or unattended sites, this turns local battery data into something that can be monitored and acted on from anywhere.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n  \u003ctr\u003e\n    \u003cth style=\"background-color: #f87c24; color: #ffffff; border: 1px solid #f87c24; padding: 8px; text-align: left;\"\u003eParameter\u003c\/th\u003e\n    \u003cth style=\"background-color: #f87c24; color: #ffffff; border: 1px solid #f87c24; padding: 8px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eModel\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBMV-700H\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eManufacturer part number\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBAM010700100\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076020080\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eOperating voltage range\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e60 to 385 VDC\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eShunt supplied\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e500A \/ 50mV, high voltage enclosure\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eMaximum shunt selection\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eUp to 10,000A\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCurrent measurement resolution\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e10 mA (0.01A)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCommunication port\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eVE.Direct\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eShunt to display cable\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e10 m UTP RJ12\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003ePower supply cable\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e2 m, fused\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSystem requirement\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGrounded negative systems only, monitor is not isolated from the shunt\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e0.74 kg\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh voltage battery banks operating between 60 and 385 VDC.\u003c\/li\u003e\n  \u003cli\u003eTraction battery systems in electric vehicles, boats and industrial equipment.\u003c\/li\u003e\n  \u003cli\u003eLarge scale off grid and hybrid installations using high voltage DC storage.\u003c\/li\u003e\n  \u003cli\u003eIndustrial and commercial backup power systems with high voltage battery strings.\u003c\/li\u003e\n  \u003cli\u003eRemote sites where battery data is monitored off site through a Victron GX device and the VRM portal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-700H round head display unit.\u003c\/li\u003e\n  \u003cli\u003eSquare bezel overlay for an alternative front appearance.\u003c\/li\u003e\n  \u003cli\u003eScrew ring for rear mounting and screws for front mounting.\u003c\/li\u003e\n  \u003cli\u003e500A \/ 50mV shunt in high voltage enclosure with quick connect PCB.\u003c\/li\u003e\n  \u003cli\u003e10 metre UTP RJ12 cable.\u003c\/li\u003e\n  \u003cli\u003e2 metre fused battery power supply cable.\u003c\/li\u003e\n  \u003cli\u003eInstallation manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cp\u003eThe BMV-700H is intended for high voltage battery systems only, from 60 to 385 VDC. It is not suitable for standard 12V, 24V or 48V installations. For those systems, the BMV-700 or BMV-702 is the correct choice. Please confirm your battery bank voltage before ordering.\u003c\/p\u003e\n\n\u003cp\u003eThe shunt must be installed on the negative conductor of the battery bank, with all negative loads and charge sources connected to the load side of the shunt. Incorrect wiring will produce inaccurate readings. The battery monitor is not isolated from the shunt, so the unit is suitable for systems with a grounded negative only.\u003c\/p\u003e\n\n\u003cp\u003eHigh voltage DC systems carry a serious risk of arc flash and electric shock and cannot be safely worked on without the correct training, tools and personal protective equipment. Installation and commissioning must be carried out by a qualified electrician or engineer experienced in high voltage DC battery systems, with correct fusing, isolation, cable sizing and earthing in accordance with local regulations. Where the monitor is connected to a managed lithium battery system, confirm compatibility with the battery management system before connection.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":60201611166030,"sku":"BAM010700100","price":390.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM010700100_-_Battery_Monitor_BMV-700H.webp?v=1784816070"},{"product_id":"victron-bmv-710h-smart-battery-monitor","title":"Victron Battery Monitor BMV-710H Smart - BAM030710100","description":"\u003ch1 style=\"color: #f87c24;\"\u003eBattery Monitor BMV-710H Smart\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron BMV-710H Smart is a high-precision battery monitor designed for systems operating at higher voltages, up to 400V DC. It is suited to professional installers and off-grid system designers working with high-voltage battery banks, including lithium and lead-acid configurations. The BMV-710H tracks state of charge, voltage, current and consumed amp-hours with accuracy that basic voltmeters cannot match.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasures battery voltage up to 400V DC, making it compatible with high-voltage battery systems beyond the range of standard BMV monitors.\u003c\/li\u003e\n  \u003cli\u003eDisplays state of charge (%), voltage, current, power, consumed amp-hours (Ah) and time remaining.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in Bluetooth via the VictronConnect app for wireless configuration, monitoring and data logging on iOS and Android devices.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay output for alarms, load control or generator start signals based on configurable thresholds.\u003c\/li\u003e\n  \u003cli\u003e500A shunt included as standard; compatible with external shunts for higher current applications.\u003c\/li\u003e\n  \u003cli\u003eBacklit display with intuitive navigation across all monitored parameters.\u003c\/li\u003e\n  \u003cli\u003eStores historical data including deepest discharge, average discharge, total Ah drawn and number of charge cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe BMV-710H is the high-voltage variant of Victron's BMV-710 Smart monitor. Where the standard 710 is rated to 95V, the 710H extends this to 400V DC, which is essential for series-connected battery banks or high-voltage DC bus systems. This makes it appropriate for larger off-grid installations, industrial backup systems and certain EV or marine applications where battery strings operate well above 48V.\u003c\/p\u003e\n\n\u003cp\u003eAccurate state of charge monitoring depends on precise current measurement over time. The BMV-710H uses a 500A shunt and a high-resolution current measurement circuit to calculate consumed amp-hours continuously. The Peukert exponent and charge efficiency factor are both configurable, allowing the monitor to be tuned to the actual behaviour of the battery chemistry in use, whether flooded lead-acid, AGM, gel or lithium.\u003c\/p\u003e\n\n\u003cp\u003eBluetooth connectivity is built in rather than added via a dongle. The VictronConnect app provides full access to settings, live data and historical logs without requiring a separate GX device. For installations integrated into a Victron system with a Cerbo GX or similar, the BMV-710H also communicates over VE.Direct.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBAM030710100\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBattery voltage range\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eUp to 400V DC\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eShunt included\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e500A \/ 50mV\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCommunication\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eBluetooth (built-in), VE.Direct\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eApp compatibility\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eVictronConnect (iOS and Android)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eRelay output\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eProgrammable (alarm, load, generator start)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e0.74 kg\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n    \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076049500\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-voltage off-grid battery banks where series-connected cells exceed 48V or 96V.\u003c\/li\u003e\n  \u003cli\u003eIndustrial and commercial backup power systems with high-voltage DC bus configurations.\u003c\/li\u003e\n  \u003cli\u003eMarine installations with elevated battery string voltages.\u003c\/li\u003e\n  \u003cli\u003eMonitoring amp-hour consumption and state of charge in lithium battery systems requiring accurate Peukert compensation.\u003c\/li\u003e\n  \u003cli\u003eSystems integrated with Victron GX devices via VE.Direct for centralised monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBMV-710H Smart battery monitor unit with display\u003c\/li\u003e\n  \u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n  \u003cli\u003eConnection cables and hardware\u003c\/li\u003e\n  \u003cli\u003eVE.Direct cable (for GX device connection)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe BMV-710H operates at voltages up to 400V DC. Installation at these voltage levels carries a significant risk of electric shock and arc flash. This monitor must be installed by a qualified electrician or experienced off-grid systems installer. The shunt must be placed on the negative battery terminal with all loads and chargers connected on the load side of the shunt. Ensure the system is fully de-energised before making any connections. For systems integrated into grid-connected installations, consult your DNO and ensure compliance with applicable UK wiring regulations.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":60201621717326,"sku":"BAM030710100","price":433.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAM030710100_-_Battery_Monitor_BMV-710H_Smart_2.webp?v=1784816387"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/collections\/Victron_Energy_Logo_svg_7f3f8f78-ed2f-4626-a2f2-2500d222314f.png?v=1781011774","url":"https:\/\/voltaconsolar.com\/collections\/victron-battery-monitors-and-smartshunt.oembed?page=2","provider":"VoltaconSolar","version":"1.0","type":"link"}