{"title":"Victron Miscellaneous","description":"\u003cp\u003eVictron accessories and components that support your energy system installation but do not fit neatly into a single product category. This includes temperature sensors, cable glands, mounting brackets, battery terminals, and other hardware used across Victron inverter, charger, and monitoring installations. Check here if you are looking for a specific accessory that is not listed elsewhere in the Victron range, or contact our technical team and we will point you in the right direction.\u003c\/p\u003e","products":[{"product_id":"vecan-canbus-bms-type-a-cable-1-8m","title":"Victron VE.Can to CAN-bus BMS type A Cable 1,8 m - ASS030710118","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Can to CAN-bus BMS Type A Cable 1.8 m\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Can to CAN-bus BMS Type A Cable connects Victron VE.Can devices to compatible CAN-bus BMS units using the Type A pinout. At 1.8 metres, it provides enough reach for most battery cabinet and inverter installations without excess cable to manage. It is intended for professional installers integrating third-party BMS-equipped battery systems with Victron equipment.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnects Victron VE.Can port to CAN-bus BMS units with Type A pinout configuration.\u003c\/li\u003e\n  \u003cli\u003eCable length of 1.8 m suits most standard battery and inverter enclosure layouts.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.08 kg, with no additional hardware required for the connection.\u003c\/li\u003e\n  \u003cli\u003eSKU ASS030710118, GTIN 8719076071600, supplied by Victron Energy.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron devices that feature a VE.Can interface, including MultiPlus, Quattro and Cerbo GX where CAN-bus BMS communication is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Can is Victron's implementation of the CAN-bus protocol, used to link inverter\/chargers, MPPT charge controllers, the Cerbo GX and other devices within a Victron system. When integrating a third-party lithium battery with a CAN-bus BMS, the BMS must communicate state of charge, cell voltage limits and charge\/discharge parameters to the Victron system. This cable carries that communication link.\u003c\/p\u003e\n\n\u003cp\u003eThe Type A designation refers to the specific pinout used on the BMS connector end. Not all CAN-bus BMS units share the same pinout, so confirming the BMS type before ordering is essential. Type A is used by a number of common lithium battery manufacturers, but always verify against the BMS documentation before purchase.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030710118\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071600\u003c\/li\u003e\n  \u003cli\u003eCable length: 1.8 m\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.08 kg\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Can (RJ45) to CAN-bus BMS Type A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting third-party CAN-bus BMS lithium batteries to Victron VE.Can networks.\u003c\/li\u003e\n  \u003cli\u003eOff-grid and hybrid solar installations using Victron inverter\/chargers with non-Victron battery systems.\u003c\/li\u003e\n  \u003cli\u003eBattery cabinet builds where the BMS and Victron GX device are within 1.8 m of each other.\u003c\/li\u003e\n  \u003cli\u003eMarine and vehicle installations integrating CAN-bus BMS batteries with Victron equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Can to CAN-bus BMS Type A Cable, 1.8 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable should be installed by a qualified electrician or experienced system integrator familiar with Victron VE.Can network configuration. Confirm the BMS pinout type (Type A) against your battery manufacturer's documentation before connecting. Incorrect pinout connections may result in communication failure or equipment damage. CAN-bus termination resistors may be required at each end of the VE.Can network depending on system topology; refer to your Victron system design for termination requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47430068207950,"sku":"ASS030710118","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-vecan-to-can-bus-bms-type-a-cable-18-m-ass030710018-264485.jpg?v=1747948430"},{"product_id":"victron-mk3-usb-interface-ve-bus-ass030140000","title":"Victron Interface MK3-USB (VE.Bus to USB) - ASS030140000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eMK3-USB Interface (VE.Bus to USB) — ASS030140000\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron MK3-USB interface connects a PC or laptop directly to the VE.Bus port on compatible Victron inverters and inverter\/chargers. It allows configuration, monitoring and firmware updates using VEConfigure and VEFlash software on Windows. This is an essential tool for installers commissioning or servicing Victron MultiPlus, MultiGrid and Quattro systems.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts VE.Bus communication to USB, enabling direct PC connection to Victron inverters and inverter\/chargers.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron MultiPlus, MultiPlus-II, MultiGrid and Quattro product ranges.\u003c\/li\u003e\n  \u003cli\u003eSupports configuration via VEConfigure software and firmware updates via VEFlash on Windows.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 0.08 kg, suitable for carrying in an installer's toolkit.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play USB connection with no external power supply required from the PC side.\u003c\/li\u003e\n  \u003cli\u003eSKU ASS030140000, GTIN 8719076019435 — genuine Victron Energy product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe MK3-USB interface is the standard tool for accessing the VE.Bus communication port found on Victron MultiPlus, MultiPlus-II, MultiGrid and Quattro inverter\/chargers. Without this interface, the internal settings of these units (charge algorithms, input current limits, transfer switch behaviour and system configuration) cannot be adjusted from a PC. It is a required item for any installer working with these products.\u003c\/p\u003e\n\n\u003cp\u003eVEConfigure, the primary configuration tool for VE.Bus devices, only communicates via MK3-USB. The same applies to VEFlash, which is used to update device firmware. Both applications run on Windows. The interface draws its operating power from the connected Victron device rather than the USB port, so no additional power source is needed on the PC side.\u003c\/p\u003e\n\n\u003cp\u003eThis interface does not provide real-time monitoring or data logging. For live system monitoring, a GX device or a VE.Bus Smart Dongle is the appropriate solution. The MK3-USB is specifically a configuration and firmware tool.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030140000\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019435\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.08 kg\u003c\/li\u003e\n  \u003cli\u003eConnection: VE.Bus (RJ45) to USB Type-A\u003c\/li\u003e\n  \u003cli\u003eCompatible software: VEConfigure, VEFlash (Windows)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCommissioning and configuring Victron MultiPlus, MultiPlus-II, MultiGrid and Quattro inverter\/chargers on site.\u003c\/li\u003e\n  \u003cli\u003eUpdating firmware on VE.Bus devices using VEFlash.\u003c\/li\u003e\n  \u003cli\u003eAdjusting charge settings, input current limits and transfer switch parameters via VEConfigure.\u003c\/li\u003e\n  \u003cli\u003eDiagnosing and reconfiguring existing installations during service visits.\u003c\/li\u003e\n  \u003cli\u003eSetting up parallel and three-phase MultiPlus or Quattro systems that require PC-based configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron MK3-USB interface (VE.Bus to USB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe MK3-USB interface is a configuration accessory and does not carry mains or battery voltage. It connects between the RJ45 VE.Bus port on the Victron device and a USB port on a Windows PC. Configuration of inverter\/charger settings, particularly in grid-connected or parallel systems, should be carried out by a qualified installer familiar with Victron VEConfigure. Incorrect configuration of grid-tied systems may affect G98 or G99 compliance. Always verify system settings against the relevant network operator requirements after making changes.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47441527734606,"sku":"ASS030140000","price":55.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/interface-mk3-usb-vebus-to-usb-ass030140000-428259.jpg?v=1747937006"},{"product_id":"victron-rj45-utp-cable-0-3m-ass030064900","title":"Victron RJ45 UTP Cable 0,3 m *If 0, order ASS030064901* - ASS030064900","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron RJ45 UTP Cable 0.3 m — ASS030064900\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron RJ45 UTP Cable (0.3 m) is a short-run data cable used to connect compatible Victron Energy devices via RJ45 ports. It is suited to installers who need a tidy, compact connection between units mounted in close proximity, such as within a battery cabinet or control panel.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e0.3 m cable length, designed for short-distance connections between adjacent Victron devices.\u003c\/li\u003e\n  \u003cli\u003eRJ45 connectors on both ends, compatible with standard Ethernet-style ports used across the Victron product range.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction for reliable data signal transmission over short distances.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.03 kg, adding minimal bulk to an installation.\u003c\/li\u003e\n  \u003cli\u003eSKU ASS030064900 — note: if stock quantity shows zero, order ASS030064901 as the direct replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eRJ45 UTP cables are used throughout Victron Energy systems to carry communication signals between devices such as the Color Control GX, MultiPlus, Quattro, BMV battery monitors, and other VE.Bus or VE.Net compatible equipment. The 0.3 m length is specifically intended for installations where components are mounted side by side or within the same enclosure, keeping cable runs short and tidy.\u003c\/p\u003e\n\n\u003cp\u003eUTP cabling at this length performs well for low-speed data communication, which is all that is required for Victron's monitoring and control protocols. There is no need for shielded cable at this distance under normal installation conditions. The standard RJ45 form factor means no specialist tooling is required for connection.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030064900\u003c\/li\u003e\n  \u003cli\u003eCable length: 0.3 m\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45 (both ends)\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.03 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019190\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron Color Control GX or Cerbo GX to adjacent VE.Bus devices.\u003c\/li\u003e\n  \u003cli\u003eShort-run data links between Victron inverter\/chargers and monitoring equipment within the same cabinet.\u003c\/li\u003e\n  \u003cli\u003eBMV battery monitor communication connections where the display unit is mounted close to the shunt interface.\u003c\/li\u003e\n  \u003cli\u003eAny Victron installation requiring a compact RJ45 data cable between co-located components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron RJ45 UTP Cable, 0.3 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries data signals only and does not conduct mains or battery power. Connection is straightforward: insert each RJ45 plug into the corresponding port on the Victron devices being linked. Ensure the correct port is used on each device, as some Victron units have multiple RJ45 ports with different functions. If this SKU (ASS030064900) shows as out of stock, order ASS030064901, which is the designated alternative.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47441957945678,"sku":"ASS030064900","price":6.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-rj45-utp-cable-03-m-ass030064900-556590.jpg?v=1747937579"},{"product_id":"victron-ve-direct-cable-1-8m","title":"Victron VE.Direct Cable 1,8m - ASS030530218","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct Cable 1.8m — ASS030530218\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron VE.Direct Cable connects VE.Direct-compatible devices to each other or to a computer, phone or display for monitoring and configuration. At 1.8 metres, it suits most panel-mounted and cabinet installations where the device and the monitoring interface are in close proximity.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.8m cable length, suitable for short to medium-distance connections between VE.Direct devices and monitoring equipment.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Victron products that use the VE.Direct communication port, including BMV battery monitors, SmartSolar MPPT charge controllers, and Phoenix inverters.\u003c\/li\u003e\n  \u003cli\u003eCarries both data and power over the VE.Direct interface, enabling device configuration and live monitoring without a separate power supply.\u003c\/li\u003e\n  \u003cli\u003eUsed with the VE.Direct to USB interface or VE.Direct Bluetooth Smart dongle to connect devices to Victron Connect or VRM Portal.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 55g, with a compact connector profile suited to installations with limited cable management space.\u003c\/li\u003e\n  \u003cli\u003eVictron part number ASS030530218, GTIN 8719076019619.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's proprietary serial communication protocol used across a wide range of their products. The cable uses a dedicated connector at each end and carries data between devices such as MPPT charge controllers, BMV battery monitors, and Phoenix inverters. It is the standard physical link required before any VE.Direct adapter (USB, Bluetooth or RS232) can function.\u003c\/p\u003e\n\n\u003cp\u003eThe 1.8m length is the most commonly specified option for installations where the charge controller or inverter is mounted within a metre or so of the monitoring display or interface dongle. For longer runs, Victron also offers 3m and 5m variants. This cable does not carry mains or battery power and is not a charging cable. It is a data cable only.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030530218\u003c\/li\u003e\n  \u003cli\u003eCable length: 1.8m\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.055 kg (55g)\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019619\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (proprietary Victron serial)\u003c\/li\u003e\n  \u003cli\u003eProtocol: VE.Direct (serial data)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a SmartSolar or BlueSolar MPPT charge controller to a BMV battery monitor for combined system data.\u003c\/li\u003e\n  \u003cli\u003eLinking a Phoenix inverter or MPPT to a VE.Direct to USB interface for configuration via VictronConnect on a laptop or PC.\u003c\/li\u003e\n  \u003cli\u003eConnecting devices to a Cerbo GX or Color Control GX for system integration and VRM Portal monitoring.\u003c\/li\u003e\n  \u003cli\u003eOff-grid and mobile installations including narrowboats, motorhomes and remote cabins where Victron VE.Direct devices are in use.\u003c\/li\u003e\n  \u003cli\u003eReplacing a damaged or missing cable in an existing Victron installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Direct Cable, 1.8m (ASS030530218)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis is a low-voltage data cable and does not carry mains or high-current battery power. It can be connected and disconnected by the end user without specialist electrical knowledge. Ensure the VE.Direct port on each device is not already occupied before connecting. If integrating into a larger solar or battery system, the wider installation should be carried out by a qualified electrician or MCS-accredited installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47441992122702,"sku":"ASS030530218","price":8.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-vedirect-cable-18m-ass030530218-278206.jpg?v=1747937654"},{"product_id":"victron-rj45-utp-cable-0-9m-ass030064920","title":"Victron RJ45 UTP Cable 0,9 m *If 0, order ASS030064921* - ASS030064920","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy RJ45 UTP Cable 0.9 m — ASS030064920\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy RJ45 UTP Cable (0.9 m) is a short-run data cable used to connect compatible Victron devices via RJ45 ports. It is suited to installers who need a reliable, correctly terminated cable for communications between Victron components in a compact installation.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e0.9 m cable length, suitable for connecting devices mounted in close proximity within a panel or enclosure.\u003c\/li\u003e\n  \u003cli\u003eStandard RJ45 connectors on both ends, compatible with Victron devices that use UTP data connections.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction for reliable low-voltage data communication.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 37 g, adding minimal bulk to an installation.\u003c\/li\u003e\n  \u003cli\u003eVictron OEM part, ensuring correct pinout and compatibility with supported Victron equipment.\u003c\/li\u003e\n  \u003cli\u003eSKU ASS030064920. If stock shows zero, order ASS030064921 as the equivalent replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis cable is used in Victron Energy systems where RJ45 data connections are required between devices such as inverter\/chargers, battery monitors, display panels and other compatible components. The 0.9 m length is intended for short-distance connections, typically within the same cabinet or wall-mounted installation area.\u003c\/p\u003e\n\n\u003cp\u003eUsing a Victron-supplied cable ensures the correct wiring configuration for the RJ45 interface. Third-party cables may use different pin assignments and can cause communication errors or device faults. For longer cable runs, Victron offers alternative lengths in the same cable series.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030064920\u003c\/li\u003e\n  \u003cli\u003eCable length: 0.9 m\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45 (both ends)\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.037 kg (37 g)\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019206\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron inverter\/chargers to compatible display or control panels.\u003c\/li\u003e\n  \u003cli\u003eData communication between Victron battery monitors and system components.\u003c\/li\u003e\n  \u003cli\u003eShort-run RJ45 connections within off-grid, marine or vehicle power systems.\u003c\/li\u003e\n  \u003cli\u003eReplacement or spare cable for existing Victron installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy RJ45 UTP Cable, 0.9 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries data signals only and does not carry mains or high-voltage power. Connection is straightforward for qualified installers familiar with Victron system wiring. Ensure the correct devices are being connected before use, as RJ45 ports on Victron equipment are not always interchangeable. If this SKU shows as unavailable, order ASS030064921 as the direct alternative.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47442160419150,"sku":"ASS030064920","price":6.79,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-rj45-utp-cable-09-m-ass030064920-502799.jpg?v=1747937780"},{"product_id":"ve-direct-to-usb-interface","title":"Victron VE.Direct to USB interface - ASS030530010","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct to USB Interface — ASS030530010\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Direct to USB interface connects Victron Energy devices with a VE.Direct port to a Windows, Mac or Linux computer via USB. It is used primarily for monitoring, configuration and firmware updates using Victron's VictronConnect software. Suitable for installers and system integrators who need direct communication between a laptop or PC and a VE.Direct-compatible device.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts VE.Direct (serial) communication to USB, enabling direct connection to a computer.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Victron Energy products that feature a VE.Direct port, including MPPT solar charge controllers, BMV battery monitors and Phoenix inverters.\u003c\/li\u003e\n  \u003cli\u003eWorks with VictronConnect software for device configuration, live monitoring and firmware updates.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play operation on Windows, macOS and Linux — no specialist hardware required.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 60 g, making it practical for field use and site commissioning.\u003c\/li\u003e\n  \u003cli\u003eIdentified by GTIN 8719076019589 and SKU ASS030530010 for straightforward procurement and stock management.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's proprietary one-to-one serial communication protocol used across a wide range of their products. The VE.Direct to USB interface acts as a protocol bridge, translating that serial data stream into a standard USB connection that any modern computer can read. This makes it the standard tool for on-site commissioning, where an installer needs to adjust charge parameters, check live data or push a firmware update without needing a GX device or network connection.\u003c\/p\u003e\n\n\u003cp\u003eThe interface is particularly useful during initial system setup, where direct access to a single device is needed before a full monitoring solution is in place. It is also commonly used for troubleshooting, allowing a technician to pull real-time data directly from an MPPT controller or battery monitor on a laptop in the field. The cable is not intended for permanent installation as a monitoring solution — for that, a GX device or VE.Direct to USB connection via a Raspberry Pi running Venus OS would be more appropriate.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030530010\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019589\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.06 kg\u003c\/li\u003e\n  \u003cli\u003eInterface: VE.Direct (serial) to USB Type-A\u003c\/li\u003e\n  \u003cli\u003eCompatible software: VictronConnect (Windows, macOS, Linux)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOn-site commissioning and configuration of Victron MPPT solar charge controllers.\u003c\/li\u003e\n  \u003cli\u003eFirmware updates for VE.Direct-compatible Victron devices in the field.\u003c\/li\u003e\n  \u003cli\u003eLive data monitoring and fault diagnosis via VictronConnect on a laptop or PC.\u003c\/li\u003e\n  \u003cli\u003eBattery monitor (BMV series) setup and parameter adjustment.\u003c\/li\u003e\n  \u003cli\u003ePhoenix inverter configuration without a GX device present.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Direct to USB interface cable (ASS030530010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis interface is a configuration and monitoring accessory, not a power or charge cable. Connect it to the VE.Direct port on the target device and to a free USB port on your computer before opening VictronConnect. No drivers are typically required on modern operating systems, though it is advisable to check Victron's software release notes for the latest VictronConnect version before use. This cable does not provide a persistent data connection for remote monitoring — a dedicated GX device is required for that purpose.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47442418434382,"sku":"ASS030530010","price":22.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-vedirect-to-usb-interface-ass030530010-223004.jpg?v=1747938163"},{"product_id":"victron-rs485-to-usb-interface-cable-5m","title":"Victron RS485 to USB interface 5m - ASS030572050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eRS485 to USB Interface Cable 5m — ASS030572050\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron RS485 to USB interface cable provides a direct serial communication link between RS485-enabled Victron devices and a PC or laptop via USB. At 5 metres in length, it gives installers enough reach to connect equipment in panels or enclosures without needing to position a laptop directly alongside the unit. It is used primarily for configuration, monitoring and firmware updates on compatible Victron products.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5 metre cable length provides practical reach in installation environments without signal degradation.\u003c\/li\u003e\n  \u003cli\u003eConverts RS485 serial signals to USB for connection to any standard PC or laptop.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron devices that use an RS485 communication port, including select MPPT solar chargers and inverters.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play USB connection; no external power supply required as the interface draws power from the USB host.\u003c\/li\u003e\n  \u003cli\u003eSuitable for use with VictronConnect or other Victron configuration software on Windows, macOS and Linux where drivers are supported.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 187g, making it easy to carry as part of a standard installer toolkit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\n\u003cp\u003eRS485 is a differential serial communication standard commonly used in industrial and energy equipment for its noise immunity over longer cable runs. Victron uses RS485 ports on certain products to allow direct wired communication for configuration and diagnostics. This interface cable bridges that RS485 port to a standard USB-A connection, making it accessible from any modern computer without requiring a dedicated serial port.\u003c\/p\u003e\n\n\u003cp\u003eThe 5m cable length is a practical choice for real-world installation scenarios where the inverter, charger or other device is mounted in a cabinet or on a wall at a distance from the technician's workstation. The built-in conversion electronics are housed within the cable assembly, keeping the setup simple. Driver installation may be required on some operating systems; check Victron's software documentation for your specific OS before use.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030572050\u003c\/li\u003e\n  \u003cli\u003eCable length: 5 metres\u003c\/li\u003e\n  \u003cli\u003eInterface: RS485 to USB\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.187 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076040088\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfiguring and updating firmware on Victron RS485-equipped devices in the field.\u003c\/li\u003e\n  \u003cli\u003eMonitoring and diagnostics on off-grid and marine installations where RS485 communication is used.\u003c\/li\u003e\n  \u003cli\u003eConnecting to Victron MPPT solar chargers or inverters with RS485 ports from a laptop during commissioning.\u003c\/li\u003e\n  \u003cli\u003eWorkshop bench testing and pre-configuration of Victron equipment before site installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x RS485 to USB interface cable, 5m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable is a passive communication accessory and does not carry mains or high-voltage DC power. No specialist electrical qualification is required to connect it between a Victron device and a PC. Ensure the correct driver is installed on your computer before use. Always follow Victron's guidance when updating firmware on live systems, and confirm the device is in a safe state before making configuration changes.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47442432164174,"sku":"ASS030572050","price":25.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/RS485_to_USB_interface_cable_5_m.jpg?v=1747938190"},{"product_id":"victron-autotransformer-120-240v-32a","title":"Victron Autotransformer 120\/240V-32A - ITR000100001","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Autotransformer 120\/240V 32A — ITR000100001\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy Autotransformer 120\/240V-32A is a split-phase voltage conversion unit designed for installations where 120V and 240V AC distribution is required from a single-phase source. It is suited to off-grid systems, marine applications, and North American-standard electrical setups where split-phase power is needed. At 32A continuous rating, it handles substantial loads without the bulk and cost of a full isolation transformer.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts between 120V and 240V split-phase AC, enabling North American-standard distribution from a single-phase input.\u003c\/li\u003e\n  \u003cli\u003e32A continuous current rating supports high-demand loads across both legs of a split-phase system.\u003c\/li\u003e\n  \u003cli\u003eAutotransformer design is more compact and efficient than a full isolation transformer for voltage-splitting applications.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron inverter\/charger systems, allowing split-phase output from a single MultiPlus or Quattro unit.\u003c\/li\u003e\n  \u003cli\u003eRobust toroidal core construction keeps no-load losses low and reduces audible hum during operation.\u003c\/li\u003e\n  \u003cli\u003eWeight of 12.8 kg reflects a substantial copper-wound core, appropriate for the rated current capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eAn autotransformer differs from an isolation transformer in that the primary and secondary windings share a common electrical connection rather than being magnetically isolated. This makes it well suited to voltage-splitting duties, where the goal is to derive a 120V\/120V split-phase output from a 240V single-phase source, or to combine two 120V legs into a 240V supply. The shared winding means lower copper losses and a more compact unit for a given power rating compared to a fully isolated design.\u003c\/p\u003e\n\n\u003cp\u003eIn practice, this unit is commonly used alongside Victron MultiPlus or Quattro inverter\/chargers in North American off-grid or marine installations. A single inverter producing 240V AC can feed the autotransformer to create the balanced 120V\/120V split-phase supply that North American appliances and distribution panels expect. The 32A rating at 240V equates to a maximum throughput of approximately 7.68kVA, which covers most residential and light commercial off-grid loads.\u003c\/p\u003e\n\n\u003cp\u003eBecause this is an autotransformer and not an isolation transformer, it does not provide galvanic isolation between input and output. Where isolation is a safety or regulatory requirement, a separate isolation transformer must be used. Installers should confirm the requirements of the installation before specifying this unit.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eITR000100001\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eVoltage\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e120\/240V AC split-phase\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eContinuous current rating\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e32A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eMaximum throughput\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eApprox. 7.68 kVA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eTransformer type\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eAutotransformer (no galvanic isolation)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e12.8 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076022404\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid systems using North American-standard 120V\/240V split-phase distribution panels.\u003c\/li\u003e\n  \u003cli\u003eMarine and yacht installations requiring split-phase AC from a single inverter output.\u003c\/li\u003e\n  \u003cli\u003eRV and motorhome builds where North American appliances require a balanced split-phase supply.\u003c\/li\u003e\n  \u003cli\u003ePairing with a Victron MultiPlus or Quattro to create a split-phase output from a single 240V inverter unit.\u003c\/li\u003e\n  \u003cli\u003eLight commercial off-grid installations with mixed 120V and 240V load requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy Autotransformer 120\/240V-32A (ITR000100001)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis autotransformer must be installed by a qualified electrician familiar with split-phase AC systems. It does not provide galvanic isolation, so it is not a substitute for an isolation transformer where isolation is required by regulation or for safety. Ensure all wiring is rated for the full 32A load and that appropriate overcurrent protection is fitted on both the input and output sides. Confirm compatibility with your inverter or AC source before installation. For marine installations, check compliance with applicable shore power and electrical safety standards.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47480968675662,"sku":"ITR000100001","price":368.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-autotransformer-120240v-32a-itr000100001-226084.jpg?v=1747940291"},{"product_id":"victron-autotransformer-120-240v-100a","title":"Victron Autotransformer 120\/240V-100A - ITR000100101","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Autotransformer 120\/240V 100A — ITR000100101\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy Autotransformer 120\/240V 100A is a split-phase voltage conversion unit designed for off-grid and marine systems that require both 120V and 240V AC outputs from a single-phase source. It is suited to professional installers working on North American split-phase systems, RV installations, and vessels where dual-voltage distribution is required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts between 120V and 240V split-phase AC, allowing a single inverter to supply both voltage levels simultaneously.\u003c\/li\u003e\n  \u003cli\u003eRated at 100A continuous current, supporting high-load applications across both output legs.\u003c\/li\u003e\n  \u003cli\u003ePassive autotransformer design with no active electronics, resulting in low losses and high thermal reliability.\u003c\/li\u003e\n  \u003cli\u003eCompact and robust enclosure with a unit weight of 12.4 kg, suitable for fixed installation in marine, vehicle or off-grid cabinet builds.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron Quattro and MultiPlus inverter\/chargers operating on 120V or 240V single-phase AC output.\u003c\/li\u003e\n  \u003cli\u003eBalances unequal loads across the two 120V legs, reducing neutral current and protecting connected equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eAn autotransformer differs from an isolation transformer in that it shares a common winding between primary and secondary, making it more compact and efficient for voltage splitting rather than galvanic isolation. In a North American split-phase system, 240V is derived from two 120V legs that are 180 degrees out of phase. The Victron Autotransformer takes a 240V input and provides two balanced 120V legs, or takes a 120V input and steps up to 240V, depending on how it is wired. This makes it a practical solution when a Quattro or MultiPlus inverter outputs only one voltage level but the installation requires both.\u003c\/p\u003e\n\n\u003cp\u003eThe 100A rating refers to the current capacity on the 120V side. Load balancing is an important function of this unit: when loads on the two 120V legs are unequal, the autotransformer actively balances the current drawn from the inverter, preventing one leg from being overloaded. This is particularly relevant in RV and marine installations where 120V and 240V appliances run simultaneously. The passive winding design means there are no fans, no control boards and no firmware to manage, keeping maintenance requirements low.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable style=\"border: 2px solid #f87c24; border-collapse: collapse; width: 100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #f87c24; color: #ffffff;\"\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eSKU\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eITR000100101\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eVoltage\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e120\/240V AC split-phase\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eCurrent Rating\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e100A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e12.4 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003eGTIN\u003c\/td\u003e\n      \u003ctd style=\"border: 1px solid #f87c24; padding: 8px;\"\u003e8719076022428\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNorth American split-phase off-grid systems using Victron Quattro or MultiPlus inverter\/chargers.\u003c\/li\u003e\n  \u003cli\u003eMarine and yacht installations requiring both 120V and 240V AC distribution from a single inverter output.\u003c\/li\u003e\n  \u003cli\u003eRV and motorhome builds where shore power or inverter output must supply mixed 120V\/240V loads.\u003c\/li\u003e\n  \u003cli\u003eRemote cabins and off-grid properties wired to North American electrical standards.\u003c\/li\u003e\n  \u003cli\u003eLoad balancing between two 120V legs in any split-phase AC distribution board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy Autotransformer 120\/240V 100A (ITR000100101)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis autotransformer handles mains-level AC voltages up to 240V at currents up to 100A. Installation must be carried out by a qualified electrician familiar with split-phase AC wiring. Correct neutral and earth bonding is critical to safe operation. Ensure the unit is mounted in a ventilated enclosure and that all cable terminations are rated for the connected load. This product is intended for use in off-grid, marine and vehicle systems and is not designed for connection to the UK public grid. G98 or G99 grid connection requirements do not apply to this product.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":47480981815630,"sku":"ITR000100101","price":416.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-autotransformer-120240v-100a-itr000100101-370592.jpg?v=1747940332"},{"product_id":"rj45-utp-cable-1-8-m-ass030064950","title":"Victron RJ45 UTP Cable 1,8 m *If 0, order ASS030064951* - ASS030064950","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron RJ45 UTP Cable 1.8 m — ASS030064950\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron RJ45 UTP Cable is a 1.8 m straight-through network cable used to connect compatible Victron Energy devices via their RJ45 communication ports. It is suited to installers and system integrators wiring up Victron equipment where a reliable, correctly terminated data cable is required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.8 m cable length, providing sufficient reach for most panel, cabinet and enclosure installations.\u003c\/li\u003e\n  \u003cli\u003eStandard RJ45 connectors at both ends, compatible with Victron devices that use RJ45 communication ports.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction, suitable for low-voltage data communication between Victron components.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.075 kg, easy to route and manage within an installation.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, manufactured to work with the Victron product ecosystem.\u003c\/li\u003e\n  \u003cli\u003eSKU ASS030064950. If stock shows zero, the equivalent replacement is ASS030064951.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eRJ45 UTP cables are used throughout Victron system installations to carry communication signals between devices such as inverter\/chargers, battery monitors, Color Control GX units, and other GX-compatible equipment. The 1.8 m length suits installations where components are mounted in close proximity, such as within a single enclosure or on an adjacent wall panel.\u003c\/p\u003e\n\n\u003cp\u003eUTP cabling is the standard for Victron's inter-device communication wiring. This cable is not a power cable and carries data only. It should not be confused with a standard Ethernet patch cable used for internet connectivity, though the physical connector format is the same. Always verify the port type and communication protocol required by your specific Victron devices before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030064950\u003c\/li\u003e\n  \u003cli\u003eCable length: 1.8 m\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45 (both ends)\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.075 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019213\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron inverter\/chargers to GX devices (e.g., Cerbo GX, Color Control GX).\u003c\/li\u003e\n  \u003cli\u003eWiring battery monitors and shunts to compatible Victron display or control units.\u003c\/li\u003e\n  \u003cli\u003eInter-device communication cabling within off-grid and hybrid solar installations.\u003c\/li\u003e\n  \u003cli\u003eReplacement cabling in existing Victron installations where the original cable has been damaged or is too short.\u003c\/li\u003e\n  \u003cli\u003eMarine, vehicle and static off-grid system builds using Victron components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron RJ45 UTP Cable, 1.8 m (ASS030064950)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries communication signals only and must be connected to the correct RJ45 data ports on compatible Victron devices. It is not suitable for mains or high-voltage connections. If this SKU (ASS030064950) shows as out of stock, order ASS030064951 as the direct alternative. For full system installations involving inverters, batteries or grid connections, always use a qualified electrician or MCS-accredited installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":49524817854798,"sku":"ASS030064950","price":6.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-rj45-utp-cable-18-m-ass030064950-954225.jpg?v=1747947535"},{"product_id":"ve-can-canbus-bms-type-a-cable-5m","title":"Victron VE.Can-CAN-bus BMS type A Cable 5m*If 0, order ASS030710150* - ASS030710050","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Can to CAN-bus BMS Type A Cable 5m\u003c\/h1\u003e\n\n\u003cp\u003eThis 5-metre cable connects a Victron VE.Can port to a CAN-bus BMS (Type A pinout) on a compatible third-party battery. It is intended for professional installers integrating supported lithium battery systems with Victron equipment such as the Cerbo GX, Venus GX or compatible Multi and Quattro inverter\/chargers.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5-metre cable length, providing flexibility in panel or cabinet layouts where the BMS and Victron device are not in close proximity.\u003c\/li\u003e\n  \u003cli\u003eDesigned for Type A CAN-bus BMS pinout, compatible with a range of third-party lithium battery systems that use this interface standard.\u003c\/li\u003e\n  \u003cli\u003eConnects directly to the VE.Can RJ45 port on Victron GX devices and compatible inverter\/chargers.\u003c\/li\u003e\n  \u003cli\u003eEnables battery state-of-charge, cell voltage, temperature and alarm data to be passed from the BMS to the Victron system.\u003c\/li\u003e\n  \u003cli\u003eSKU ASS030710050. If stock is zero, the alternative part ASS030710150 should be ordered instead.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.22 kg, suitable for neat, low-profile wiring installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe VE.Can to CAN-bus BMS Type A cable allows a Victron GX device or compatible inverter\/charger to communicate directly with a third-party battery management system over CAN-bus. This communication link is what allows the Victron system to receive real-time data from the battery, including state of charge, charge and discharge limits, cell-level voltages and temperature readings. Without this link, the Victron system cannot respond dynamically to battery conditions.\u003c\/p\u003e\n\n\u003cp\u003eType A refers to the specific pin assignment used on the BMS side of the cable. It is important to confirm that the connected battery BMS uses the Type A pinout before ordering, as an incorrect cable will prevent communication. Victron publishes a compatibility list for supported BMS types. The 5-metre length suits installations where the battery bank and GX device are mounted in separate enclosures or at a distance from one another.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030710050\u003c\/li\u003e\n  \u003cli\u003eCable length: 5 metres\u003c\/li\u003e\n  \u003cli\u003eInterface: VE.Can (RJ45) to CAN-bus BMS Type A\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.22 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076048602\u003c\/li\u003e\n  \u003cli\u003eAlternative part (if out of stock): ASS030710150\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting third-party CAN-bus BMS (Type A) lithium batteries to Victron Cerbo GX or Venus GX devices.\u003c\/li\u003e\n  \u003cli\u003eOff-grid solar systems using Victron inverter\/chargers with compatible lithium battery banks.\u003c\/li\u003e\n  \u003cli\u003eMarine and vehicle installations where the battery and GX device are housed separately.\u003c\/li\u003e\n  \u003cli\u003eCommercial energy storage systems requiring BMS-to-inverter communication over CAN-bus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Can to CAN-bus BMS Type A cable, 5 metres\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eConfirm the BMS pinout type before installation. This cable is for Type A CAN-bus BMS connections only. Incorrect cable selection will result in a failed communication link and may cause system faults. CAN-bus termination resistors may be required depending on the network configuration. Installation should be carried out by a qualified electrician or experienced system integrator familiar with Victron equipment and the battery manufacturer's requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":50594578399566,"sku":"ASS030710050","price":11.83,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/victron-vecan-to-can-bus-bms-type-a-cable-18-m-ass030710018-264485.jpg?v=1747948430"},{"product_id":"victron-rj45-utp-cable-0-3m","title":"Victron RJ45 UTP Cable 0,3 m - ASS030064901","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy RJ45 UTP Cable 0.3 m\u003c\/h1\u003e\n\n\u003cp\u003eA short RJ45 UTP patch cable for connecting Victron Energy devices over short distances. Suited to installers and system integrators wiring up Victron components in a panel, enclosure or cabinet where a full-length cable would create unnecessary slack.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e0.3 m cable length, designed for short-run connections between adjacent Victron devices.\u003c\/li\u003e\n  \u003cli\u003eStandard RJ45 connectors compatible with Victron VE.Bus, VE.Can, and other RJ45-based communication ports.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction suitable for low-voltage data communication.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 0.03 kg, adding minimal bulk inside enclosures or distribution boards.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, manufactured to fit Victron's communication interface specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis 0.3 m RJ45 UTP cable is a genuine Victron Energy accessory used to link compatible Victron devices via their RJ45 communication ports. At 0.3 m, it is specifically intended for installations where devices are mounted close together, such as a MultiPlus and a GX device in the same enclosure, or a battery monitor connected directly to a nearby display unit.\u003c\/p\u003e\n\n\u003cp\u003eUTP patch cables of this type carry data signals rather than power, so correct cable management and avoiding sharp bends or pinch points is good practice. Using a genuine Victron cable ensures the connector geometry and cable specification match the ports on Victron equipment, reducing the risk of intermittent connections.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030064901\u003c\/li\u003e\n  \u003cli\u003eCable length: 0.3 m\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.03 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071433\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a Victron MultiPlus or Quattro to a GX device (Cerbo GX, Color Control GX) mounted in the same enclosure.\u003c\/li\u003e\n  \u003cli\u003eShort-run VE.Bus or VE.Can connections between Victron components on a DIN rail or backplate.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a nearby display or GX device.\u003c\/li\u003e\n  \u003cli\u003eTidy cable routing inside compact off-grid or marine electrical panels where longer cables would create excess slack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy RJ45 UTP Cable, 0.3 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries data signals only and does not supply power. Ensure the RJ45 ports on both devices are clean and undamaged before connecting. Avoid routing the cable alongside high-current DC cables where possible, as this reduces the risk of interference on communication lines. For full system wiring, including inverter, battery and grid connections, always use a qualified installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855253700942,"sku":"ASS030064901","price":6.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030064901_-_RJ45_UTP_Cable_0_3_m.webp?v=1781091898"},{"product_id":"victron-rj45-utp-cable-0-9m","title":"Victron RJ45 UTP Cable 0,9 m - ASS030064921","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy RJ45 UTP Cable 0.9 m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy RJ45 UTP cable is a 0.9 m patch cable used to connect compatible Victron devices via RJ45 ports. It is suited to installers and system integrators wiring up Victron equipment where a short, reliable data connection is required between components.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e0.9 m cable length, suitable for short runs between adjacent devices or within enclosures.\u003c\/li\u003e\n  \u003cli\u003eStandard RJ45 connectors at both ends, compatible with Victron devices that use RJ45 communication ports.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction for data signal integrity over short distances.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 37 g, adding negligible weight to any installation.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, supplied under SKU ASS030064921.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eRJ45 UTP cables are used throughout Victron Energy systems to carry communication signals between devices such as inverter\/chargers, battery monitors, GX devices, and other compatible equipment. The 0.9 m length is practical for installations where components are mounted close together, such as within a single cabinet or on a compact wall-mounted board.\u003c\/p\u003e\n\n\u003cp\u003eUTP construction uses twisted wire pairs to reduce interference from nearby electrical equipment, which is relevant in battery rooms and switchboard environments where cabling runs alongside power conductors. This cable is a standard Cat-style patch cable terminated with RJ45 plugs, and it should be used only with Victron devices that specify RJ45 communication connections. It is not a power cable.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030064921\u003c\/li\u003e\n  \u003cli\u003eCable length: 0.9 m\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45 (both ends)\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.037 kg (37 g)\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071440\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron GX devices to compatible inverter\/chargers or battery monitors via RJ45 port.\u003c\/li\u003e\n  \u003cli\u003eShort communication runs within battery enclosures or wall-mounted system boards.\u003c\/li\u003e\n  \u003cli\u003eReplacement cable for existing Victron installations where the original cable has been lost or damaged.\u003c\/li\u003e\n  \u003cli\u003eSpare stock for installers carrying out multiple Victron system builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy RJ45 UTP Cable, 0.9 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries communication signals only and must not be used for power connections. Ensure the RJ45 ports on both devices are communication ports before connecting. For full system wiring, always refer to the wiring diagrams provided with each Victron device. Where this cable forms part of a larger solar or battery installation, the overall system should be commissioned by a qualified installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855254094158,"sku":"ASS030064921","price":6.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030064921_-_RJ45_UTP_Cable_0_9_m.webp?v=1781091902"},{"product_id":"victron-rj45-utp-cable-1-8m","title":"Victron RJ45 UTP Cable 1,8 m - ASS030064951","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy RJ45 UTP Cable 1.8 m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy RJ45 UTP Cable is a standard unshielded twisted pair patch cable used to connect compatible Victron devices via their RJ45 communication ports. At 1.8 m in length, it suits most panel, cabinet and wall-mounted installation layouts where devices are in close proximity.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.8 m cable length, suitable for short-run connections between Victron devices in the same enclosure or on the same wall.\u003c\/li\u003e\n  \u003cli\u003eStandard RJ45 connectors at both ends, compatible with the VE.Bus, VE.Net and communication ports found on a wide range of Victron equipment.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction for reliable data transmission in low-interference environments.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.075 kg, with a compact form factor that keeps cable runs tidy in finished installations.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, manufactured to the same specification as cables supplied with Victron products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eMany Victron Energy inverters, chargers, battery monitors and system panels communicate via RJ45 ports using standard UTP cabling. This cable provides a direct, plug-and-play connection between those ports without requiring custom crimping or sourcing generic patch cables that may not meet the required pinout.\u003c\/p\u003e\n\n\u003cp\u003eThe 1.8 m length gives enough reach for most rack, cabinet or wall-panel installations where components are mounted close together. For longer runs between separate enclosures or rooms, Victron also offers extended cable lengths. UTP construction is appropriate for the low-voltage signal levels used in Victron communication networks, provided the cable is routed away from high-current DC or AC conductors where practical.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030064951\u003c\/li\u003e\n  \u003cli\u003eCable length: 1.8 m\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45 (both ends)\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.075 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071457\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a Victron MultiPlus or Quattro inverter\/charger to a Color Control GX or Cerbo GX.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a system display panel.\u003c\/li\u003e\n  \u003cli\u003eConnecting Victron devices within a VE.Bus network in a residential or commercial off-grid system.\u003c\/li\u003e\n  \u003cli\u003eReplacement cable for existing Victron installations where the original cable has been lost or damaged.\u003c\/li\u003e\n  \u003cli\u003eShort-run communication connections in marine, motorhome and vehicle-based power systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy RJ45 UTP Cable, 1.8 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries low-voltage communication signals only and does not conduct mains or high-voltage DC power. It can be connected and disconnected by the installer or end user without specialist electrical qualifications. Where possible, route the cable away from high-current DC cables and AC mains wiring to minimise the risk of signal interference. Always confirm the correct port and pinout on each device before connecting, referring to the relevant Victron product manual.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855255273806,"sku":"ASS030064951","price":8.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030064951_-_RJ45_UTP_Cable_1_8_m.webp?v=1781091907"},{"product_id":"victron-rj45-utp-cable-3m","title":"Victron RJ45 UTP Cable 3 m - ASS030064981","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy RJ45 UTP Cable 3 m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy RJ45 UTP Cable is a 3-metre unshielded twisted pair cable used to connect compatible Victron devices via their RJ45 communication ports. It is suited to installers and system integrators wiring up Victron equipment where a reliable data link between components is required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-metre length provides sufficient reach for most panel, cabinet and enclosure installations.\u003c\/li\u003e\n  \u003cli\u003eStandard RJ45 connectors at both ends, compatible with Victron devices that use RJ45 communication ports.\u003c\/li\u003e\n  \u003cli\u003eUTP (unshielded twisted pair) construction suitable for low-voltage data communication between Victron components.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.12 kg, making it easy to route and manage within an installation.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, ensuring compatibility with supported products in the Victron ecosystem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eRJ45 UTP cables are used throughout Victron Energy systems to carry communication signals between devices such as inverter\/chargers, battery monitors, solar charge controllers and display panels. The RJ45 port on Victron equipment typically carries VE.Bus or similar proprietary communication protocols, so using the correct cable type and length matters for signal integrity.\u003c\/p\u003e\n\n\u003cp\u003eAt 3 metres, this cable suits installations where components are mounted in close proximity, such as within a single enclosure or across adjacent wall-mounted units. UTP construction is adequate for the low-noise environments typical of residential and light commercial battery rooms or plant rooms. For longer runs or environments with significant electrical interference, a shielded alternative may be more appropriate.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030064981\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (unshielded twisted pair)\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45 (both ends)\u003c\/li\u003e\n  \u003cli\u003eCable length: 3 m\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.12 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071464\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron MultiPlus or Quattro inverter\/chargers to a Color Control GX or Cerbo GX.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a GX device or display panel.\u003c\/li\u003e\n  \u003cli\u003eWiring SmartSolar or BlueSolar charge controllers to system communication hubs.\u003c\/li\u003e\n  \u003cli\u003eGeneral RJ45 data connections between Victron components in off-grid and battery backup systems.\u003c\/li\u003e\n  \u003cli\u003eReplacement cable for existing Victron installations where the original cable has been damaged or is too short.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy RJ45 UTP Cable, 3 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure the RJ45 connectors are fully seated and latched at both ends before powering the system. Verify that the connected devices use compatible RJ45 communication ports before use. Route the cable away from high-current DC cables where possible to minimise the risk of interference. For complex or high-voltage system installations, connection work should be carried out by a qualified electrician or accredited installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855256125774,"sku":"ASS030064981","price":8.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030064981_-_RJ45_UTP_Cable_3_m.webp?v=1781091911"},{"product_id":"victron-rj45-utp-cable-5m","title":"Victron RJ45 UTP Cable 5 m - ASS030065001","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy RJ45 UTP Cable 5 m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy RJ45 UTP Cable is a 5-metre unshielded twisted pair cable used to connect compatible Victron devices via their RJ45 communication ports. It is suited to installers and system integrators wiring up Victron equipment where a reliable data connection between components is required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5-metre length provides flexibility for installations where devices are not in close proximity.\u003c\/li\u003e\n  \u003cli\u003eRJ45 connectors on both ends, compatible with Victron devices that use RJ45 communication ports.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction suitable for low-noise indoor installation environments.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.172 kg, making it easy to route and manage within an installation.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, ensuring compatibility with supported Victron products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eRJ45 UTP cables are used throughout Victron Energy systems to carry communication signals between devices such as inverter\/chargers, battery monitors, solar charge controllers and display panels. The RJ45 port on Victron equipment typically carries VE.Bus or similar proprietary communication protocols, so using the correct cable type and length matters for signal integrity.\u003c\/p\u003e\n\n\u003cp\u003eAt 5 metres, this cable suits installations where the control panel, display or monitoring device is mounted at a distance from the main inverter or charge controller. UTP construction is appropriate for most indoor cabinet and enclosure installations. For environments with significant electrical interference, a shielded alternative should be considered.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030065001\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45 (both ends)\u003c\/li\u003e\n  \u003cli\u003eCable length: 5 m\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.172 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071471\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron inverter\/chargers to remote control panels or displays.\u003c\/li\u003e\n  \u003cli\u003eLinking battery monitors to compatible Victron system components.\u003c\/li\u003e\n  \u003cli\u003eWiring solar charge controllers to monitoring or control devices within off-grid and hybrid systems.\u003c\/li\u003e\n  \u003cli\u003eGeneral RJ45 communication cabling within Victron Energy installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy RJ45 UTP Cable, 5 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eVerify that the target Victron devices use a standard RJ45 communication port before fitting this cable. Route the cable away from high-current DC or AC wiring where possible to minimise interference. For complex or high-voltage system installations, connection and commissioning should be carried out by a qualified installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855256846670,"sku":"ASS030065001","price":12.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030065001_-_RJ45_UTP_Cable_5_m.webp?v=1781091915"},{"product_id":"victron-rs485-to-usb-interface-cable-1-8m","title":"Victron RS485 to USB interface 1.8m - ASS030572018","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron RS485 to USB Interface Cable 1.8m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron RS485 to USB Interface cable provides a direct serial communication link between RS485-equipped Victron devices and a PC or laptop via USB. It is used by installers and technicians who need to configure, monitor or update firmware on compatible Victron equipment from a computer without a native RS485 port.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts RS485 serial signals to USB for connection to any standard PC or laptop.\u003c\/li\u003e\n  \u003cli\u003e1.8m cable length provides practical reach during installation and commissioning work.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron devices that use an RS485 communication port.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play USB connection; no external power supply required.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 67g, suitable for carrying in a tool kit.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030572018 | GTIN: 8719076040071\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eRS485 is a differential serial communication standard commonly used in industrial and energy equipment for its noise immunity over longer cable runs. Victron uses RS485 ports on a range of products to allow direct serial communication for configuration and monitoring tasks. This cable bridges that interface to the USB ports found on modern computers, removing the need for a separate RS485 adapter or converter box.\u003c\/p\u003e\n\n\u003cp\u003eThe 1.8m length is long enough to reach a laptop placed on a workbench or floor while connected to wall-mounted or rack-mounted equipment. The cable draws power from the USB bus, so no additional power source is needed during use. Driver installation may be required depending on the operating system; check compatibility with your PC before use on site.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030572018\u003c\/li\u003e\n  \u003cli\u003eCable length: 1.8m\u003c\/li\u003e\n  \u003cli\u003eInterface: RS485 to USB\u003c\/li\u003e\n  \u003cli\u003eWeight: 67.3g\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076040071\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfiguring Victron inverters, chargers or other RS485-equipped devices from a laptop on site.\u003c\/li\u003e\n  \u003cli\u003eFirmware updates on compatible Victron products via a PC.\u003c\/li\u003e\n  \u003cli\u003eMonitoring and diagnostics during commissioning of off-grid and solar installations.\u003c\/li\u003e\n  \u003cli\u003eWorkshop bench testing and pre-configuration of Victron equipment before deployment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron RS485 to USB interface cable, 1.8m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eConnect the RS485 end to the appropriate port on the Victron device and the USB end to a computer. USB drivers may be required before the interface is recognised by the operating system. This cable is intended for use by qualified installers and technicians familiar with Victron equipment. Always ensure the Victron device is in a safe state before connecting or disconnecting communication cables during a live installation.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855257436494,"sku":"ASS030572018","price":22.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030572018_-_RS485_to_USB_interface_1.8m.webp?v=1781091921"},{"product_id":"victron-ve-direct-cable-0-3m","title":"Victron VE.Direct Cable 0,3m - ASS030530203","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron VE.Direct Cable 0.3m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron VE.Direct Cable is a short-run data cable used to connect VE.Direct-compatible Victron devices to each other or to monitoring and communication accessories. At 0.3m, this cable is suited to installations where components are mounted in close proximity, keeping wiring tidy and minimising cable clutter in panels or enclosures.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e0.3m cable length, designed for short-distance connections between closely mounted Victron devices.\u003c\/li\u003e\n  \u003cli\u003eCompatible with the VE.Direct communication protocol used across a wide range of Victron products including BMV battery monitors, MPPT solar charge controllers, and Phoenix inverters.\u003c\/li\u003e\n  \u003cli\u003eCarries both data and power over a single cable, enabling device communication without additional wiring.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 15g, adding negligible weight to any installation.\u003c\/li\u003e\n  \u003cli\u003eTerminated with the standard VE.Direct connector at both ends for a secure, positive-locking connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron Energy's proprietary point-to-point communication interface. It is used to pass data between devices such as MPPT charge controllers, BMV battery monitors, and the VE.Direct to USB or Bluetooth Smart Dongle accessories. The 0.3m length is the shortest in the VE.Direct cable range, making it the right choice when two devices are mounted side by side in a cabinet, enclosure, or on a DIN rail.\u003c\/p\u003e\n\n\u003cp\u003eBecause VE.Direct is a point-to-point protocol, each cable connects one device to one other device or accessory. If you need to connect multiple VE.Direct devices to a single monitoring point such as a Raspberry Pi or a Cerbo GX, you will need a separate cable for each device. The 0.3m variant avoids unnecessary cable loops and keeps installations clean where space is limited.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030530203\u003c\/li\u003e\n  \u003cli\u003eCable length: 0.3m\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.015kg (15g)\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019596\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (both ends)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a Victron MPPT solar charge controller to a VE.Direct to USB interface or Bluetooth Smart Dongle mounted directly alongside it.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a Cerbo GX or other GX device installed in the same enclosure.\u003c\/li\u003e\n  \u003cli\u003eShort-run data connections in compact off-grid systems, campervan builds, and marine electrical panels.\u003c\/li\u003e\n  \u003cli\u003eConnecting a Phoenix inverter to a VE.Direct monitoring accessory in a tight installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron VE.Direct Cable, 0.3m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries low-voltage data signals only and does not require specialist electrical installation. Ensure both devices are powered down before connecting or disconnecting VE.Direct cables. Verify that both ends of the connection are VE.Direct-compatible before use, as the connector form factor may physically resemble other connectors but is not interchangeable with non-VE.Direct ports.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855270543694,"sku":"ASS030530203","price":8.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030530203_-_VE.Direct_Cable_0_3m.webp?v=1781091957"},{"product_id":"victron-ve-direct-cable-0-9m","title":"Victron VE.Direct Cable 0,9m - ASS030530209","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron VE.Direct Cable 0.9m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron VE.Direct Cable is a dedicated data communication cable for connecting VE.Direct-compatible Victron devices. At 0.9 metres, it suits installations where components are mounted in close proximity. It is used by installers and system integrators to enable monitoring, configuration and data transfer between Victron products.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e0.9m cable length, suited to compact or panel-mounted installations where devices sit close together.\u003c\/li\u003e\n  \u003cli\u003eConnects any two VE.Direct-compatible Victron devices, including MPPT solar charge controllers, BMV battery monitors, Phoenix inverters and more.\u003c\/li\u003e\n  \u003cli\u003eEnables real-time data communication for monitoring, configuration and logging via the VE.Direct protocol.\u003c\/li\u003e\n  \u003cli\u003eCompatible with the VictronConnect app when used with a VE.Direct to USB or VE.Direct to Bluetooth Smart dongle.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, manufactured to work reliably within the VE.Direct ecosystem.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 25g, adding negligible weight to any installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's proprietary serial communication protocol used across a wide range of their products. The cable carries data between devices, allowing a charge controller to report state-of-charge data to a battery monitor, or enabling a connected computer or phone to read live system data and adjust settings. Without this cable, direct device-to-device communication is not possible.\u003c\/p\u003e\n\n\u003cp\u003eThe 0.9m length is the shortest in the VE.Direct cable range. It is the right choice when two devices are mounted on the same DIN rail, enclosure panel or within a compact battery cabinet. Using a cable that is too long in a tight installation creates unnecessary clutter and potential strain on connectors. If your devices are further apart, longer VE.Direct cables are available in the Victron range.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030530209\u003c\/li\u003e\n  \u003cli\u003eCable length: 0.9m\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.025kg (25g)\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019602\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (proprietary Victron serial)\u003c\/li\u003e\n  \u003cli\u003eProtocol: VE.Direct\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a Victron MPPT SmartSolar or BlueSolar charge controller to a BMV battery monitor.\u003c\/li\u003e\n  \u003cli\u003eLinking a Phoenix inverter to a VE.Direct panel or display unit.\u003c\/li\u003e\n  \u003cli\u003eConnecting a VE.Direct device to a Raspberry Pi or computer via a VE.Direct to USB interface.\u003c\/li\u003e\n  \u003cli\u003eUse with a VE.Direct Bluetooth Smart dongle to enable wireless monitoring via VictronConnect.\u003c\/li\u003e\n  \u003cli\u003eOff-grid and mobile installations where devices are housed in a single enclosure or battery box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Victron VE.Direct Cable, 0.9m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries data only and does not conduct mains or battery power. It can be connected and disconnected by the system owner without specialist tools. Ensure the correct VE.Direct port is used on each device and that the connector is fully seated before powering the system. For full system commissioning involving inverters, charge controllers or battery connections, a qualified electrician or accredited installer should be engaged.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855271133518,"sku":"ASS030530209","price":8.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030530209_-_VE.Direct_Cable_0_9m.webp?v=1781091961"},{"product_id":"victron-ve-direct-cable-0-9m-right-angle","title":"Victron VE.Direct Cable 0,9m (one side Right Angle conn) - ASS030531209","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct Cable 0.9m (One Side Right Angle Connector)\u003c\/h1\u003e\n\n\u003cp\u003eThis is a 0.9m VE.Direct cable with a right angle connector on one end and a straight connector on the other. It is used to connect Victron devices that communicate over the VE.Direct protocol, such as MPPT solar charge controllers, BMV battery monitors and Phoenix inverters, to compatible displays, interfaces or other VE.Direct-enabled equipment. The right angle connector is useful where space behind the device is limited or where cable routing requires a low-profile exit.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e0.9m cable length, suitable for short-run connections between adjacent devices or panels.\u003c\/li\u003e\n  \u003cli\u003eOne right angle VE.Direct connector allows flush mounting against walls, enclosures or tight cabinet installations.\u003c\/li\u003e\n  \u003cli\u003eOne straight VE.Direct connector on the opposite end for standard port connection.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Victron Energy devices that use the VE.Direct interface, including MPPT charge controllers, BMV monitors and Phoenix inverters.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 25g, adding negligible weight to any installation.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030531209 | GTIN: 8719076019664\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's proprietary serial communication protocol used across a wide range of their products. The cable carries data between devices, enabling monitoring, configuration and integration with systems such as the Victron Color Control GX, GlobalLink 520 or a laptop running VictronConnect. This 0.9m variant is the shortest standard length available, making it appropriate where devices are mounted close together and cable management is a priority.\u003c\/p\u003e\n\n\u003cp\u003eThe right angle connector on one end reduces the clearance depth required behind the device. This is particularly useful in flush-mounted enclosures, narrow battery cabinets or installations where a straight cable exit would create strain or obstruct panel doors. The straight connector on the opposite end fits any standard VE.Direct port without modification.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCable length: 0.9m\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (one right angle, one straight)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.025kg (25g)\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030531209\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019664\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a Victron MPPT charge controller to a Color Control GX or Cerbo GX in a compact enclosure.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a GX device or VE.Direct to USB interface for data logging.\u003c\/li\u003e\n  \u003cli\u003eConnecting a Phoenix inverter to a monitoring or display device where cable routing space is restricted.\u003c\/li\u003e\n  \u003cli\u003eShort-run data connections in off-grid battery cabinets, narrowboats, motorhomes and marine installations.\u003c\/li\u003e\n  \u003cli\u003eAny installation where a straight cable exit would cause strain relief or clearance issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x VE.Direct cable, 0.9m, with one right angle connector and one straight connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries data only and does not supply power to connected devices. Ensure both devices are powered down before connecting or disconnecting the cable. VE.Direct ports are not hot-swap rated on all devices, so check the relevant device documentation before connecting under live conditions. No specialist electrical qualification is required to connect this cable, but the wider system installation (inverters, charge controllers, battery connections) should be carried out by a qualified electrician or competent person.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855271854414,"sku":"ASS030531209","price":8.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030531209_-_VE.Direct_Cable_0_9m_one_side_Right_Angle_conn.webp?v=1781091965"},{"product_id":"victron-ve-direct-cable-3m","title":"Victron VE.Direct Cable 3m - ASS030530230","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron VE.Direct Cable 3m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron VE.Direct Cable is a dedicated data communication cable for connecting Victron devices that use the VE.Direct interface. At 3 metres in length, it suits installations where the connected devices are not in immediate proximity. It is used by solar installers, off-grid system builders and anyone integrating Victron monitoring or control equipment.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3 metre cable length, providing flexibility in panel, inverter and battery monitor placement.\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for the Victron VE.Direct communication protocol.\u003c\/li\u003e\n  \u003cli\u003eCompatible with VE.Direct-equipped devices including BMV battery monitors, SmartSolar MPPT charge controllers, Phoenix inverters and more.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.115 kg, adding minimal bulk to an installation.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, ensuring reliable data transmission between supported devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's proprietary serial communication interface used across a wide range of their products. The cable carries data between devices such as MPPT charge controllers and a Colour Control GX, GlobalLink 520, or a computer running VictronConnect. Without a correctly rated and properly terminated cable, communication between devices will not function as intended.\u003c\/p\u003e\n\n\u003cp\u003eThe 3m length is the most commonly specified option for installations where the monitoring unit or GX device is mounted at a short distance from the charge controller or battery monitor. It is long enough to route neatly through an enclosure or along a wall without excess slack. For installations requiring shorter or longer runs, other lengths are available in the VE.Direct cable range.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030530230\u003c\/li\u003e\n  \u003cli\u003eCable length: 3 metres\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.115 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019626\u003c\/li\u003e\n  \u003cli\u003eInterface: VE.Direct\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a SmartSolar or BlueSolar MPPT charge controller to a Cerbo GX or Colour Control GX.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a GX device for system-level monitoring.\u003c\/li\u003e\n  \u003cli\u003eConnecting a Phoenix inverter with VE.Direct port to a monitoring or control unit.\u003c\/li\u003e\n  \u003cli\u003eInterfacing a VE.Direct device with a laptop or Raspberry Pi running VictronConnect or Venus OS via a VE.Direct to USB adapter.\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabin, narrowboat, motorhome and marine installations where Victron components are spread across a small space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron VE.Direct Cable, 3m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003ePlug the cable directly into the VE.Direct ports on compatible Victron devices. No tools are required. Ensure both devices are powered down before connecting or disconnecting the cable where possible. This cable carries data only and does not supply power to connected devices. If you are integrating this cable as part of a wider solar PV or battery system, installation of the broader system should be carried out by a qualified electrician or MCS-accredited installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855272116558,"sku":"ASS030530230","price":10.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030530230_-_VE.Direct_Cable_3m.webp?v=1781091981"},{"product_id":"victron-rj45-utp-cable-10m","title":"Victron RJ45 UTP Cable 10 m - ASS030065011","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy RJ45 UTP Cable 10 m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy RJ45 UTP Cable is a 10-metre unshielded twisted pair cable used to connect compatible Victron devices over a standard RJ45 interface. It is suited to installers wiring up Victron communication networks where a longer cable run is required between components.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10-metre length provides flexibility for installations where devices are not in close proximity.\u003c\/li\u003e\n  \u003cli\u003eStandard RJ45 connectors at both ends, compatible with Victron's VE.Bus, VE.Net and other RJ45-based communication ports.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction suitable for low-voltage data communication between Victron components.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connection with no additional tools or crimping required.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.36 kg, easy to route and manage within an installation enclosure or across a panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis cable is used to link Victron Energy devices that communicate via RJ45 ports, such as Multi and Quattro inverter\/chargers connected to a Color Control GX, CCGX, or other GX devices, as well as VE.Bus system components. The 10-metre length is the longest standard option in Victron's UTP cable range, making it appropriate where equipment is spread across a larger installation space.\u003c\/p\u003e\n\n\u003cp\u003eUTP cabling carries data signals rather than power, so the cable does not need to be rated for high current. The twisted pair construction helps reduce signal interference over the cable run. For most Victron communication applications, this cable is a direct replacement or extension option where shorter cables are insufficient.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030065011\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45 at both ends\u003c\/li\u003e\n  \u003cli\u003eCable length: 10 metres\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.36 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071488\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron Multi or Quattro inverter\/chargers to GX monitoring and control devices.\u003c\/li\u003e\n  \u003cli\u003eVE.Bus network wiring between Victron system components in residential or commercial off-grid installations.\u003c\/li\u003e\n  \u003cli\u003eExtending communication cable runs in larger battery rooms, plant rooms or marine electrical panels.\u003c\/li\u003e\n  \u003cli\u003eReplacement cabling for existing Victron installations where original cables are damaged or too short.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy RJ45 UTP Cable, 10 metres\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries data signals only and should be connected to the correct RJ45 communication ports on compatible Victron devices. Verify port compatibility before installation, as RJ45 ports on Victron equipment are not all interchangeable. For full system wiring, including inverter, battery and grid connections, installation should be carried out by a qualified electrician familiar with Victron Energy systems.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855399682382,"sku":"ASS030065011","price":12.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030065011_-_RJ45_UTP_Cable_10_m.webp?v=1781094372"},{"product_id":"victron-ve-can-rj45-terminator","title":"Victron VE.Can RJ45 terminator (bag of 2) - ASS030700000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron VE.Can RJ45 Terminator (Bag of 2)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron VE.Can RJ45 terminator is a passive network component required to correctly terminate a VE.Can bus. Supplied in a bag of two, this product is aimed at installers configuring Victron systems with multiple devices connected over VE.Can.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTerminates a VE.Can network bus at both ends to prevent signal reflection and communication errors.\u003c\/li\u003e\n  \u003cli\u003eRJ45 form factor fits directly into the VE.Can port on compatible Victron devices.\u003c\/li\u003e\n  \u003cli\u003ePassive component requiring no power or configuration.\u003c\/li\u003e\n  \u003cli\u003eSupplied as a bag of two, providing both terminators needed for a single VE.Can network segment.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 8 g, suitable for keeping as a standard stock item on any Victron installation.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Victron devices that use the VE.Can interface, including Quattro, Multi, MPPT charge controllers and Cerbo GX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eA CAN bus network requires a 120-ohm termination resistor at each end of the bus to function correctly. Without proper termination, signal reflections cause communication errors between devices, which can result in unreliable data, fault conditions or loss of communication between components such as inverter\/chargers, MPPT controllers and the GX device. The VE.Can RJ45 terminator provides this termination in a compact plug that fits directly into any spare VE.Can RJ45 port.\u003c\/p\u003e\n\n\u003cp\u003eEach VE.Can network segment needs exactly two terminators: one at each physical end of the bus. This bag contains both terminators required for a single segment, so a complete installation can be terminated without ordering separately. For larger systems with multiple network segments, additional bags will be needed.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030700000\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019923\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ45\u003c\/li\u003e\n  \u003cli\u003eQuantity per bag: 2\u003c\/li\u003e\n  \u003cli\u003eWeight: 8 g (per bag)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTerminating VE.Can networks in off-grid solar installations using Victron equipment.\u003c\/li\u003e\n  \u003cli\u003eCompleting CAN bus wiring in marine and vehicle installations with multiple Victron devices.\u003c\/li\u003e\n  \u003cli\u003eCommercial and industrial Victron systems where several devices share a single VE.Can bus.\u003c\/li\u003e\n  \u003cli\u003eReplacement terminators for existing installations where the original terminators have been lost or damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x VE.Can RJ45 terminator plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eOne terminator must be fitted at each end of the VE.Can bus. Fit them into the unused RJ45 VE.Can port on the first and last device in the network chain. Devices in the middle of the chain should have both VE.Can ports occupied by network cables, not terminators. Incorrect termination is a common cause of VE.Can communication issues, so verify terminator placement if devices are not appearing correctly on the GX device or VRM portal. No tools are required for installation.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855400468814,"sku":"ASS030700000","price":6.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030700000_-_VE.Can_RJ45_terminator_bag_of_2.webp?v=1781094405"},{"product_id":"vecan-canbus-bms-type-a-cable-5m","title":"Victron VE.Can to CAN-bus BMS type A Cable 5 m - ASS030710150","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Can to CAN-bus BMS Type A Cable 5 m\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Can to CAN-bus BMS Type A Cable connects a Victron GX device or VE.Can-equipped product to a compatible CAN-bus BMS battery system. At 5 metres in length, it gives installers practical routing flexibility in battery enclosures, van conversions, and off-grid cabinet builds where the GX device and BMS are not in close proximity.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5 m cable length provides flexibility for installations where the GX device and BMS are mounted apart.\u003c\/li\u003e\n  \u003cli\u003eConnects VE.Can port on Victron GX devices to CAN-bus BMS Type A compatible battery systems.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring with correctly pinned connectors for Type A CAN-bus BMS communication.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.22 kg, suitable for space-constrained installations.\u003c\/li\u003e\n  \u003cli\u003eVictron OEM cable (SKU: ASS030710150) designed to ensure correct pin mapping and signal integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eCAN-bus communication between a GX device and a battery BMS allows the system to exchange real-time data including state of charge, cell voltages, charge and discharge limits, and alarm states. Using the correct cable type matters: Type A CAN-bus BMS wiring uses a specific pin assignment that differs from Type B. Using the wrong cable will result in no communication or incorrect data. This Victron-supplied cable removes that ambiguity.\u003c\/p\u003e\n\n\u003cp\u003eThe 5 m length is the longer of the standard options Victron offers for this connection, making it suited to larger enclosures, separate battery and inverter cabinets, or installations where cable routing adds distance. The cable terminates in the appropriate connectors for direct connection without adapters or field wiring.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030710150\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071617\u003c\/li\u003e\n  \u003cli\u003eCable length: 5 m\u003c\/li\u003e\n  \u003cli\u003eConnection type: VE.Can to CAN-bus BMS Type A\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.22 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron GX devices (Cerbo GX, Venus GX, etc.) to CAN-bus Type A BMS battery systems.\u003c\/li\u003e\n  \u003cli\u003eOff-grid and hybrid solar installations with managed lithium battery banks.\u003c\/li\u003e\n  \u003cli\u003eMarine and vehicle installations where the GX device and battery BMS are in separate locations.\u003c\/li\u003e\n  \u003cli\u003eCommercial battery storage cabinets requiring longer cable runs between components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Can to CAN-bus BMS Type A Cable, 5 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eVerify that your BMS uses CAN-bus Type A pin assignment before ordering. Type A and Type B cables are not interchangeable. This cable should be connected with the system powered down. For installations involving lithium battery systems, grid-tied inverters, or high-voltage DC equipment, connection and commissioning should be carried out by a qualified installer familiar with Victron system configuration.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855400567118,"sku":"ASS030710150","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030710150_-_VE.Can_to_CAN-bus_BMS_type_A_Cable_5_m.webp?v=1781094410"},{"product_id":"victron-ve-direct-cable-1-8m-right-angle","title":"Victron VE.Direct Cable 1,8m (one side Right Angle conn) - ASS030531218","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct Cable 1.8m (One Side Right Angle Connector)\u003c\/h1\u003e\n\n\u003cp\u003eA 1.8m VE.Direct cable for connecting Victron Energy devices that use the VE.Direct communication protocol. One end features a right angle connector, making it suitable for installations where space is restricted or cable routing requires a low-profile exit from the device port.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.8m cable length provides flexibility for most panel, inverter and battery monitor installations.\u003c\/li\u003e\n  \u003cli\u003eOne right angle connector allows neat cable routing in confined enclosures or tight mounting positions.\u003c\/li\u003e\n  \u003cli\u003eOne straight connector on the opposite end for standard port access.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Victron devices featuring a VE.Direct port, including BMV battery monitors, SmartSolar MPPT charge controllers, and Phoenix inverters.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 45g, adding minimal bulk to an installation.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030531218 | GTIN: 8719076019671\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's point-to-point communication interface, used to pass data between compatible devices and monitoring equipment such as the Color Control GX, Cerbo GX, or a PC running VictronConnect. This cable carries that data link over a 1.8m run, which suits most standard enclosure and wall-mount configurations without excess slack.\u003c\/p\u003e\n\n\u003cp\u003eThe right angle connector on one end reduces the strain on the port in installations where the cable must exit horizontally or where a straight plug would foul against a panel, wall or adjacent component. This is a practical consideration in compact battery enclosures, van conversions, and marine installations where cable management matters.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030531218\u003c\/li\u003e\n  \u003cli\u003eCable length: 1.8m\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (one straight, one right angle)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.045kg (45g)\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019671\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting SmartSolar or BlueSolar MPPT charge controllers to a GX device or VE.Direct to USB interface.\u003c\/li\u003e\n  \u003cli\u003eLinking BMV battery monitors to a Cerbo GX or Color Control GX in space-restricted enclosures.\u003c\/li\u003e\n  \u003cli\u003eConnecting Phoenix inverters to monitoring or display equipment.\u003c\/li\u003e\n  \u003cli\u003eVan, motorhome and marine installations where cable routing is tight around the device port.\u003c\/li\u003e\n  \u003cli\u003eReplacing damaged or missing VE.Direct cables in existing Victron systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x VE.Direct cable, 1.8m, with one right angle connector and one straight connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure both devices are powered down before connecting or disconnecting VE.Direct cables. The right angle connector should be oriented to match the cable exit direction required by your installation. VE.Direct is a data-only interface and carries no power to connected devices. No specialist electrical qualification is required to fit this cable, though all associated electrical work on solar, battery and inverter systems should be carried out by a qualified installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855400599886,"sku":"ASS030531218","price":8.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030531218_-_VE.Direct_Cable_1_8m_one_side_Right_Angle_conn.webp?v=1781094414"},{"product_id":"victron-ve-direct-cable-10m","title":"Victron VE.Direct Cable 10m - ASS030530310","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron VE.Direct Cable 10m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron VE.Direct Cable (10m) connects VE.Direct-compatible devices to each other or to a monitoring interface, enabling data communication across a longer cable run. It is suited to installations where components are mounted at a distance from each other, such as a solar charge controller in a battery compartment and a display or monitoring device in a control panel.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10-metre cable length provides flexibility for installations where components are spread across a larger space.\u003c\/li\u003e\n  \u003cli\u003eUses the VE.Direct communication protocol, compatible with Victron MPPT solar charge controllers, BMV battery monitors, Phoenix inverters and other VE.Direct-equipped devices.\u003c\/li\u003e\n  \u003cli\u003eConnects to VE.Direct ports for data transfer, enabling remote monitoring and configuration via compatible interfaces.\u003c\/li\u003e\n  \u003cli\u003eLightweight construction at 0.325 kg, suitable for permanent installation in vehicles, vessels and fixed off-grid systems.\u003c\/li\u003e\n  \u003cli\u003eSKU ASS030530310, GTIN 8719076019640, supplied as a single cable ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's point-to-point serial communication interface, used across a wide range of their product line. The cable carries data between devices such as MPPT charge controllers and the VE.Direct to USB interface, the Color Control GX, GlobalLink 520, or a dedicated display like the MPPT Control. Without a cable of sufficient length, routing through bulkheads, conduit or cabinetry can be difficult. The 10m version addresses installations where a shorter cable would not reach.\u003c\/p\u003e\n\n\u003cp\u003eThe cable is passive: it carries no power and requires no configuration. It simply needs to be plugged into the VE.Direct ports on both devices. One cable supports one device connection. If multiple devices need to be monitored from a single GX device, a separate cable is required for each.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030530310\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019640\u003c\/li\u003e\n  \u003cli\u003eCable length: 10 metres\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.325 kg\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (proprietary Victron serial interface)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a Victron MPPT charge controller to a GX monitoring device where the two are mounted in separate enclosures or compartments.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor shunt to a display or GX device across a longer cable run in a narrowboat, yacht or motorhome.\u003c\/li\u003e\n  \u003cli\u003eRouting data cables through conduit or trunking in a fixed off-grid or backup power installation.\u003c\/li\u003e\n  \u003cli\u003eExtending communication reach in larger battery rooms or plant rooms where shorter cables are insufficient.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron VE.Direct Cable, 10m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries data only and does not require any electrical installation qualification to fit. Ensure both devices have an available VE.Direct port before ordering. The VE.Direct interface is point-to-point, so each connected device requires its own dedicated cable. Route the cable away from high-current DC wiring where possible to avoid interference.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855400665422,"sku":"ASS030530310","price":12.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030530310_-_VE.Direct_Cable_10m.webp?v=1781094418"},{"product_id":"victron-ve-direct-cable-5m","title":"Victron VE.Direct Cable 5m - ASS030530250","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron VE.Direct Cable 5m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron VE.Direct Cable (5m) connects VE.Direct-compatible devices to each other or to a monitoring interface such as the Color Control GX, Cerbo GX, or a PC via a VE.Direct to USB adapter. It is used by installers and system integrators who need to pass data between Victron components across longer cable runs within a system enclosure or installation.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5-metre cable length, suitable for installations where components are not in close proximity.\u003c\/li\u003e\n  \u003cli\u003eUses the VE.Direct proprietary serial communication protocol for reliable data transfer between Victron devices.\u003c\/li\u003e\n  \u003cli\u003eCompatible with a wide range of Victron products including MPPT solar charge controllers, BMV battery monitors, Phoenix inverters, and SmartSolar chargers.\u003c\/li\u003e\n  \u003cli\u003eTerminated with VE.Direct connectors at both ends, ready to use without modification.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030530250 | GTIN: 8719076019633 | Weight: 0.185 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's point-to-point serial communication interface. It carries both data and, on some devices, a small supply voltage. The protocol is used to transmit real-time operating data including state of charge, voltage, current, and fault codes between devices. This makes it the standard wiring method for connecting BMV monitors, MPPT controllers, and Phoenix inverters to a GX device or a laptop running VictronConnect.\u003c\/p\u003e\n\n\u003cp\u003eThe 5m length is the longest standard VE.Direct cable in the Victron range. It is appropriate where the charge controller, battery monitor, or inverter is mounted at a distance from the GX device or monitoring panel. Using the correct cable length avoids unnecessary coiling and keeps installations tidy without requiring custom cable fabrication.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCable length: 5 metres\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (both ends)\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030530250\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019633\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.185 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting an MPPT solar charge controller to a Cerbo GX or Color Control GX in a system where components are mounted apart.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a GX device for system-wide state-of-charge monitoring.\u003c\/li\u003e\n  \u003cli\u003eConnecting a Phoenix inverter to a monitoring or control interface via VE.Direct.\u003c\/li\u003e\n  \u003cli\u003eData logging and configuration via a VE.Direct to USB adapter connected to a laptop or Raspberry Pi running Venus OS.\u003c\/li\u003e\n  \u003cli\u003eOff-grid, marine, and vehicle installations where panel-mounted GX devices are located away from battery or charge controller compartments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron VE.Direct Cable, 5m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure both devices are powered down before connecting or disconnecting VE.Direct cables. The VE.Direct port is not designed for hot-swapping under load. Route cables away from high-current DC wiring to avoid interference. Each VE.Direct port supports only one connection at a time; if multiple devices need to connect to a single GX unit, each requires its own dedicated port or a VE.Direct to USB adapter per device.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59855400698190,"sku":"ASS030530250","price":10.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030530250_-_VE.Direct_Cable_5m.webp?v=1781094423"},{"product_id":"victron-mk3-usb-c-ve-bus-interface","title":"Victron Interface MK3-USB-C (VE.Bus to USB-C) - ASS030140030","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron MK3-USB-C Interface (VE.Bus to USB-C)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron MK3-USB-C is a hardware interface that connects a computer or laptop to Victron VE.Bus devices via USB-C. It is used by installers and technicians to configure, monitor and update firmware on compatible Victron inverters, inverter\/chargers and Multi units using VEConfigure and VictronConnect software.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides a direct USB-C to VE.Bus connection between a PC or laptop and compatible Victron devices.\u003c\/li\u003e\n  \u003cli\u003eRequired for full configuration of VE.Bus products using VEConfigure software, including transfer switch settings, charge parameters and assistant programming.\u003c\/li\u003e\n  \u003cli\u003eSupports firmware updates on VE.Bus inverters and inverter\/chargers.\u003c\/li\u003e\n  \u003cli\u003eUSB-C connector suits modern laptops and computers without the need for an additional adapter when using USB-C ports.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 80g, suitable for carrying in a tool kit on site.\u003c\/li\u003e\n  \u003cli\u003eCompatible with the full range of Victron VE.Bus products including MultiPlus, MultiPlus-II, Quattro and related inverter\/charger models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Bus is Victron's communication protocol used across its inverter\/charger range. To access the full configuration depth of these products, a physical hardware interface is required between the VE.Bus RJ45 port on the unit and a computer running Victron's configuration software. The MK3-USB-C fulfils this role, replacing the older MK2 and MK3-USB (Type-A) interfaces with a USB-C variant suited to current hardware.\u003c\/p\u003e\n\n\u003cp\u003eVEConfigure, the primary tool for configuring VE.Bus devices, requires this interface to communicate with the inverter or inverter\/charger. Tasks such as setting AC input current limits, configuring assistants, adjusting battery charge profiles and updating device firmware all depend on a working MK3 connection. Without it, these settings are not accessible through any other means on VE.Bus-only products.\u003c\/p\u003e\n\n\u003cp\u003eThe interface is also used alongside VictronConnect for certain diagnostic and monitoring functions. It is a standard item in the toolkit of any installer working regularly with Victron MultiPlus or Quattro systems.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030140030\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076057994\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.08 kg\u003c\/li\u003e\n  \u003cli\u003eConnection (computer side): USB-C\u003c\/li\u003e\n  \u003cli\u003eConnection (device side): VE.Bus (RJ45)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfiguring Victron MultiPlus and MultiPlus-II inverter\/chargers on residential and commercial installations.\u003c\/li\u003e\n  \u003cli\u003eProgramming Victron Quattro units in off-grid, hybrid and backup power systems.\u003c\/li\u003e\n  \u003cli\u003ePerforming firmware updates on VE.Bus devices during commissioning or servicing.\u003c\/li\u003e\n  \u003cli\u003eSetting up assistants (such as ESS, generator start\/stop or self-consumption) via VEConfigure.\u003c\/li\u003e\n  \u003cli\u003eOn-site diagnostics and parameter checks by service engineers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron MK3-USB-C Interface (VE.Bus to USB-C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis interface is a configuration and commissioning tool, not a permanent installation component. It should be used by qualified installers familiar with Victron VEConfigure software and VE.Bus system architecture. Incorrect configuration of inverter\/charger parameters can affect system behaviour and safety. Always ensure firmware and software versions are compatible before performing updates. No mains or battery wiring is involved in using this interface, but the connected inverter\/charger should be handled in accordance with its own installation and safety requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59856059072846,"sku":"ASS030140030","price":47.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030140030_-_Interface_MK3-USB-C_VE.Bus_to_USB-C.webp?v=1781101976"},{"product_id":"victron-shore-power-inlet-stainless-16a-250vac-2p3w","title":"Victron Power Inlet stainless with cover 16A\/250Vac (2p\/3w) - SHP301602000","description":"\u003ch1 style=\"color: #f87c24;\"\u003ePower Inlet Stainless Steel with Cover 16A\/250Vac (2P\/3W)\u003c\/h1\u003e\n\n\u003cp\u003eA stainless steel shore power inlet rated at 16A\/250Vac in a 2-pole, 3-wire configuration. Designed for marine, motorhome and off-grid installations where a weatherproof, durable connection point is required for shore power or generator hookup.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel construction provides corrosion resistance in marine and outdoor environments.\u003c\/li\u003e\n  \u003cli\u003eRated at 16A\/250Vac, suitable for standard single-phase shore power connections.\u003c\/li\u003e\n  \u003cli\u003e2-pole, 3-wire (2P\/3W) configuration accommodates live, neutral and earth conductors.\u003c\/li\u003e\n  \u003cli\u003eIncludes a protective cover to seal the inlet when not in use, preventing ingress of moisture and debris.\u003c\/li\u003e\n  \u003cli\u003eDesigned for flush or panel mounting on boats, caravans, motorhomes and static off-grid installations.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 16A shore power plugs and cables used across the UK and EU.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis Victron Energy power inlet provides a fixed connection point for bringing shore power or generator supply into a vessel, vehicle or off-grid structure. The stainless steel body is chosen for its resistance to salt air, moisture and mechanical wear, making it a practical choice for permanent outdoor or marine installations. The hinged cover protects the socket face when unplugged, reducing the risk of corrosion and water ingress at the connection point.\u003c\/p\u003e\n\n\u003cp\u003eThe 2P\/3W (2-pole, 3-wire) format is the standard configuration for single-phase AC connections, carrying live, neutral and earth. At 16A\/250Vac, this inlet is rated for typical shore power loads found on leisure craft, motorhomes and small off-grid cabins. It is designed to be panel-mounted, providing a clean, permanent installation rather than a temporary cable solution.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHP301602000\u003c\/li\u003e\n  \u003cli\u003eRated current: 16A\u003c\/li\u003e\n  \u003cli\u003eRated voltage: 250Vac\u003c\/li\u003e\n  \u003cli\u003eConfiguration: 2-pole, 3-wire (2P\/3W)\u003c\/li\u003e\n  \u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n  \u003cli\u003eIncludes protective cover: Yes\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.34 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076007463\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShore power inlet on sailing yachts, motorboats and narrowboats.\u003c\/li\u003e\n  \u003cli\u003eExternal power connection point on motorhomes and campervans.\u003c\/li\u003e\n  \u003cli\u003eGenerator hookup inlet on off-grid cabins and static structures.\u003c\/li\u003e\n  \u003cli\u003eReplacement or upgrade inlet on existing marine or vehicle electrical panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Stainless steel power inlet 16A\/250Vac (2P\/3W) with protective cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis inlet should be installed by a qualified electrician or a competent marine electrical engineer. Correct panel cutout dimensions and appropriate cable sizing for 16A AC circuits must be observed. Ensure the earth conductor is connected and that the installation complies with BS EN ISO 13297 for marine applications or relevant BS 7671 wiring regulations for land-based installations. The protective cover must be closed and latched whenever the inlet is not in use.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59856061301070,"sku":"SHP301602000","price":76.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHP301602000_-_Power_Inlet_stainless_with_cover_16A-250Vac_2p-3w.webp?v=1781102041"},{"product_id":"victron-rj12-utp-cable-0-9m","title":"Victron RJ12 UTP Cable 0,9 m - ASS030066010","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy RJ12 UTP Cable 0.9 m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy RJ12 UTP Cable is a 0.9 m data cable used to connect compatible Victron devices via RJ12 interface. It is suited to installers and system integrators wiring up Victron battery monitors, inverter\/chargers and other equipment that communicate over RJ12 connections.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRJ12 connectors on both ends for direct device-to-device data connections.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction suitable for low-voltage data communication.\u003c\/li\u003e\n  \u003cli\u003e0.9 m cable length provides a practical reach for panel-mounted or cabinet-installed equipment.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.025 kg, adding negligible weight to any installation.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, manufactured to match Victron device specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eRJ12 is a 6-position, 6-contact (6P6C) connector format used across a range of Victron Energy products for data and communication wiring. This cable provides a ready-made, correctly terminated connection between devices without the need for field-crimping or custom assembly.\u003c\/p\u003e\n\n\u003cp\u003eThe UTP construction uses twisted pairs to reduce interference on data lines, which is relevant in electrical enclosures where other cabling may introduce noise. At 0.9 m, this cable suits installations where devices are mounted in close proximity, such as within a single enclosure or on an adjacent wall panel.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030066010\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ12 (6P6C) both ends\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eCable length: 0.9 m\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.025 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071532\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron battery monitors to compatible display or control units.\u003c\/li\u003e\n  \u003cli\u003eData wiring between Victron inverter\/chargers and remote panels within the same enclosure.\u003c\/li\u003e\n  \u003cli\u003eShort-run RJ12 communication links in off-grid, marine and vehicle power systems.\u003c\/li\u003e\n  \u003cli\u003eReplacement or spare cable for existing Victron installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x RJ12 UTP Cable, 0.9 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries data signals only and does not conduct mains or high-voltage power. It should be routed away from high-current DC cables where possible to minimise interference. Verify that both connected devices use the RJ12 (6P6C) interface before fitting. For full system installations involving inverters, battery banks or grid connections, use a qualified electrician or MCS-accredited installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59856061366606,"sku":"ASS030066010","price":6.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030066010_-_RJ12_UTP_Cable_0_9_m.webp?v=1781102044"},{"product_id":"32a-3-phase-single-phase-shore-power-adapter-cord-cee","title":"Victron Adapter Cord 32A\/3 to single ph.-CEE Plug 5P\/CEE Coupling 3P - SHP307700300","description":"\u003ch1 style=\"color: #f87c24;\"\u003eAdapter Cord 32A 3-Phase to Single Phase, CEE 5P Plug to CEE 3P Coupling\u003c\/h1\u003e\n\n\u003cp\u003eThis adapter cord converts a 32A 3-phase CEE 5-pin shore power supply to a single-phase CEE 3-pin output. It is designed for marine, motorhome and off-grid installations where a 3-phase shore connection is available but only single-phase power is required at the load end.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e32A rated 3-phase CEE 5-pin plug (input) to single-phase CEE 3-pin coupling (output)\u003c\/li\u003e\n  \u003cli\u003eAllows single-phase equipment to connect to a 3-phase shore power pedestal or supply\u003c\/li\u003e\n  \u003cli\u003eRated at 32A continuous, suitable for high-load shore power applications\u003c\/li\u003e\n  \u003cli\u003eCEE industrial connector format, compatible with standard marina and campsite shore power pedestals\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 0.3 kg, suitable for storage aboard vessels or in vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eShore power pedestals at marinas and some campsites often provide a 3-phase CEE 5-pin outlet as the primary connection point. Where the onboard system or equipment requires only single-phase power, a direct connection is not possible without an adapter. This cord bridges that gap, taking one phase from the 3-phase supply and presenting it as a standard single-phase CEE 3-pin output.\u003c\/p\u003e\n\n\u003cp\u003eThe 32A current rating means it is suitable for use with inverter-chargers, battery chargers and other high-draw single-phase loads typically found in marine and leisure vehicle installations. The CEE connector format is the international standard for industrial and shore power connections, ensuring broad compatibility with existing infrastructure.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHP307700300\u003c\/li\u003e\n  \u003cli\u003eInput connector: CEE 5-pin plug, 3-phase, 32A\u003c\/li\u003e\n  \u003cli\u003eOutput connector: CEE 3-pin coupling, single-phase, 32A\u003c\/li\u003e\n  \u003cli\u003eCurrent rating: 32A\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.3 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076007623\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting single-phase onboard chargers or inverter-chargers to 3-phase marina shore power pedestals\u003c\/li\u003e\n  \u003cli\u003eMotorhome and caravan hookups where only a 3-phase CEE outlet is available at the pitch\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabins or site installations drawing single-phase power from a 3-phase supply\u003c\/li\u003e\n  \u003cli\u003eTemporary power setups on construction sites or events using 3-phase distribution boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Adapter cord, 32A 3-phase CEE 5-pin plug to single-phase CEE 3-pin coupling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis adapter draws from a single phase of the 3-phase supply. Ensure the shore power pedestal or distribution board is rated to supply at least 32A on the phase being used. Connection to shore power infrastructure should be carried out by a qualified electrician or marine electrical engineer. Do not exceed the 32A current rating of the adapter. Verify that the single-phase load does not create a significant imbalance on the 3-phase supply in installations where this may be a concern.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863661871438,"sku":"SHP307700300","price":37.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHP307700300_-_Adapter_Cord_32A-3_to_single_ph.-CEE_Plug_5P-CEE_Coupling_3P.webp?v=1781183062"},{"product_id":"victron-galvanic-isolator-vdi-16a","title":"Victron Galvanic Isolator VDI-16 A - GDI000016000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Galvanic Isolator VDI-16A\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy VDI-16A is a galvanic isolator designed to protect boat hulls and shore power wiring from galvanic corrosion. It is rated at 16A continuous and fits into the shore power earth conductor to block low-voltage DC galvanic currents while maintaining full AC earth continuity for safety. It is suited to marina berths, canal boats, and any vessel connected to shore power.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e16A continuous current rating, suitable for standard single-phase shore power connections.\u003c\/li\u003e\n  \u003cli\u003eBlocks DC galvanic currents flowing through the shore earth conductor without interrupting AC earth protection.\u003c\/li\u003e\n  \u003cli\u003eDiode-based design provides a blocking voltage threshold that stops corrosive galvanic currents at source.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 1.15 kg, allowing straightforward installation in confined bilge or panel spaces.\u003c\/li\u003e\n  \u003cli\u003eManufactured by Victron Energy, with consistent build quality and compatibility with Victron shore power systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eGalvanic corrosion occurs when two dissimilar metals are connected through an electrolyte (seawater or canal water) and a conductive path such as the shore power earth cable. Small DC currents flow continuously through this path, gradually dissolving metal fittings, propellers, anodes and hull fittings. The VDI-16A interrupts this DC path by placing a pair of blocking diodes in series with the earth conductor. The diodes present a forward voltage drop that is high enough to stop galvanic currents (typically below 1V) but low enough that the earth conductor remains fully functional for AC fault protection.\u003c\/p\u003e\n\n\u003cp\u003eThe 16A rating matches the capacity of a standard 16A shore power supply, which is the most common connection found at UK and European marina pontoons. The unit is installed in-line on the earth conductor of the shore power cable, inside the vessel. Because it does not interrupt the protective earth under fault conditions, it complies with the principle of maintaining earth continuity required by marine electrical standards. Installers should verify compliance with the specific standard applicable to the vessel type and flag state.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: GDI000016000\u003c\/li\u003e\n  \u003cli\u003eCurrent rating: 16A continuous\u003c\/li\u003e\n  \u003cli\u003eWeight: 1.15 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076022374\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSailing and motor yachts connected to marina shore power.\u003c\/li\u003e\n  \u003cli\u003eCanal boats and narrowboats on shore power at marina or towpath hook-ups.\u003c\/li\u003e\n  \u003cli\u003eAny vessel where galvanic corrosion of underwater metalwork is a concern due to shore power earth connections.\u003c\/li\u003e\n  \u003cli\u003eRetrofit installation into existing shore power inlets on vessels without galvanic protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy Galvanic Isolator VDI-16A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe VDI-16A must be installed by a qualified marine electrician familiar with the relevant marine electrical standards (such as BS EN ISO 13297 for European recreational craft). It is wired in-line on the earth conductor of the shore power inlet, inside the vessel. Incorrect installation, particularly any wiring that bypasses or interrupts the protective earth under fault conditions, creates a serious shock hazard. Do not install this unit without confirming the final installation meets the applicable standard for your vessel type and flag state.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863680516430,"sku":"GDI000016000","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_GDI000016000_-_Galvanic_Isolator_VDI-16_A.webp?v=1781183356"},{"product_id":"victron-mk2-2b-interface-ve-bus-rs232","title":"Victron Interface MK2.2b (VE.Bus to RS232) - ASS030120210","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron MK2.2b Interface (VE.Bus to RS232)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron MK2.2b is a wired interface that connects VE.Bus-equipped Victron inverters and inverter\/chargers to a PC via RS232 serial port. It is used primarily for configuration, monitoring and firmware updates using Victron's VEConfigure and VEFlash software tools. This interface is aimed at installers and technicians who need direct serial communication with VE.Bus devices.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts VE.Bus communication to RS232 serial protocol for PC connectivity.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron VE.Bus inverters and inverter\/chargers, including MultiPlus and Quattro ranges.\u003c\/li\u003e\n  \u003cli\u003eEnables device configuration via VEConfigure software and firmware updates via VEFlash.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 40 g, suitable for carrying in a tool kit.\u003c\/li\u003e\n  \u003cli\u003eSKU ASS030120210, GTIN 8719076019404, supplied by Victron Energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe MK2.2b provides a direct serial link between a VE.Bus device and a PC RS232 port. RS232 remains the standard interface for Victron's VEConfigure and VEFlash tools, making this adapter a practical requirement for installers who need to set system parameters, adjust charge curves, configure multi-unit parallel or three-phase systems, or update device firmware in the field.\u003c\/p\u003e\n\n\u003cp\u003eFor laptops and modern PCs without a native RS232 port, a USB-to-RS232 adapter is required in addition to this interface. The MK2.2b itself handles only the VE.Bus-to-RS232 conversion. It does not provide USB connectivity and is not a replacement for the VE.Bus Smart Dongle or other wireless monitoring accessories.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030120210\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019404\u003c\/li\u003e\n  \u003cli\u003eCommunication: VE.Bus to RS232\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.04 kg (40 g)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfiguring Victron MultiPlus and Quattro inverter\/chargers using VEConfigure.\u003c\/li\u003e\n  \u003cli\u003eUploading firmware to VE.Bus devices using VEFlash.\u003c\/li\u003e\n  \u003cli\u003eSetting up parallel and three-phase multi-unit systems that require direct serial configuration.\u003c\/li\u003e\n  \u003cli\u003eField diagnostics and parameter adjustments by qualified installers and service technicians.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron MK2.2b VE.Bus to RS232 interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis interface is a configuration and programming tool, not a permanent installation component. It should be used by qualified installers or technicians familiar with Victron VE.Bus systems. Ensure the correct Victron software version is installed on the PC before use. A separate USB-to-RS232 adapter will be needed if the host computer does not have a native RS232 serial port.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863681237326,"sku":"ASS030120210","price":43.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030120210_-_Interface_MK2.2b_VE.Bus_to_RS232.webp?v=1781184117"},{"product_id":"victron-inverting-remote-on-off-cable","title":"Victron Inverting remote on-off cable - ASS030550120","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Inverting Remote On-Off Cable\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy inverting remote on-off cable allows compatible Victron inverters and inverter\/chargers to be controlled remotely by reversing the on-off logic signal. It is designed for installations where the control signal polarity needs to be inverted, giving installers flexibility when integrating Victron equipment with external control systems or switches.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eInverts the remote on-off logic signal, enabling control from systems with opposite polarity output.\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for use with compatible Victron Energy inverters and inverter\/charger units.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 11 g, with no additional hardware required for installation.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connection to the remote on-off port on supported Victron devices.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030550120 | GTIN: 8719076036470.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eSome external control systems, automation relays or switches output a signal polarity that is the inverse of what Victron's remote on-off input expects. Without this cable, the device would behave in the opposite way to what is intended: switching off when it should be on, and vice versa. This cable corrects that by inverting the signal before it reaches the Victron unit.\u003c\/p\u003e\n\n\u003cp\u003eThe cable connects directly to the remote on-off terminal on compatible Victron inverters and inverter\/chargers. It requires no additional components and adds no measurable complexity to the installation. For installers working with building management systems, generator controllers or third-party automation equipment, this cable resolves polarity mismatches without modifying the control system itself.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030550120\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076036470\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.011 kg (11 g)\u003c\/li\u003e\n  \u003cli\u003eCompatible with: Victron Energy inverters and inverter\/chargers with a remote on-off port\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrating Victron inverters with third-party automation or building management systems that output an inverted control signal.\u003c\/li\u003e\n  \u003cli\u003eConnecting Victron inverter\/chargers to generator controllers with opposite polarity on-off outputs.\u003c\/li\u003e\n  \u003cli\u003eOff-grid and marine installations where external switching logic does not match Victron's default remote on-off behaviour.\u003c\/li\u003e\n  \u003cli\u003eRetrofit installations where the existing control wiring cannot be easily modified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy inverting remote on-off cable (ASS030550120)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable should be installed by a qualified electrician or experienced Victron installer. Verify compatibility with your specific Victron inverter or inverter\/charger model before installation. Ensure the remote on-off port on the connected device is rated for the control signal being applied. For inverter\/charger installations connected to the grid, all work must comply with current UK wiring regulations and any applicable G98 or G99 requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863694147918,"sku":"ASS030550120","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030550120_-_Inverting_remote_on-off_cable.webp?v=1781183480"},{"product_id":"victron-16a-250vac-shore-power-plug-2p3w","title":"Victron Plug 16A\/250Vac (2p\/3w) for Power Inlet 16A - SHP301604000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Plug 16A\/250Vac (2p\/3w) for Power Inlet 16A\u003c\/h1\u003e\n\n\u003cp\u003eThis is the Victron Energy replacement plug rated at 16A\/250Vac in a 2-pole\/3-wire configuration, designed to mate with Victron's 16A shore power inlets. It is intended for marine, off-grid and mobile installations where a secure, weatherproof shore power connection is required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRated at 16A continuous current at 250Vac, suitable for single-phase AC shore power connections.\u003c\/li\u003e\n  \u003cli\u003e2-pole\/3-wire (2p\/3w) configuration, providing live, neutral and earth conductors.\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically to mate with Victron Energy 16A power inlets for a secure, compatible fit.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 0.34 kg, suited to installations where space and weight are considerations.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy component, ensuring consistent quality and compatibility within Victron shore power systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Victron 16A\/250Vac plug is the cable-end connector used with Victron's shore power inlet range. The 2p\/3w wiring arrangement carries line, neutral and protective earth, which is the standard requirement for single-phase AC connections in marine and off-grid environments. Using the correct matched plug ensures a reliable mechanical and electrical connection at the inlet, reducing the risk of arcing or poor contact under load.\u003c\/p\u003e\n\n\u003cp\u003eThis plug is a direct replacement or spare part for installations already using Victron shore power inlets. It is not a universal shore power plug and is intended specifically for use with the corresponding Victron 16A inlet. Installers fitting new shore power systems or replacing worn components should verify the inlet model before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHP301604000\u003c\/li\u003e\n  \u003cli\u003eRated current: 16A\u003c\/li\u003e\n  \u003cli\u003eRated voltage: 250Vac\u003c\/li\u003e\n  \u003cli\u003eConfiguration: 2-pole\/3-wire (2p\/3w)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.34 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076007500\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShore power connections on narrowboats, canal boats and leisure craft.\u003c\/li\u003e\n  \u003cli\u003eMarine vessels using Victron shore power inlets for AC supply from a marina or pontoon.\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabins and mobile installations with Victron shore power inlet systems.\u003c\/li\u003e\n  \u003cli\u003eReplacement plug for existing Victron 16A shore power installations where the original plug is damaged or worn.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy 16A\/250Vac 2p\/3w plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis plug must be wired by a qualified electrician. Correct termination of live, neutral and earth conductors is essential for safe operation. For marine installations, wiring should comply with applicable marine electrical standards. Do not use this plug with inlets or systems it is not rated or designed for. Ensure the supply circuit is isolated before connecting or disconnecting the plug.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863718396238,"sku":"SHP301604000","price":60.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHP301604000_-_Plug_16A-250Vac_2p-3w_for_Power_Inlet_16A.webp?v=1781183698"},{"product_id":"victron-shore-power-inlet-polyamide-16a-250vac-2p3w","title":"Victron Power Inlet Polyamid with cover 16A\/250Vac (2p\/3w) - SHP301603000","description":"\u003ch1 style=\"color: #f87c24;\"\u003ePower Inlet Polyamide with Cover 16A\/250Vac (2P\/3W)\u003c\/h1\u003e\n\n\u003cp\u003eA shore power inlet designed for marine, caravan and off-grid installations where a weatherproof, panel-mounted AC connection point is required. Rated at 16A\/250Vac in a 2-pole\/3-wire configuration, this polyamide inlet accepts a shore power cable and provides a protected entry point for mains AC supply into a vessel, vehicle or static installation.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRated at 16A and 250Vac, suitable for standard single-phase shore power connections.\u003c\/li\u003e\n  \u003cli\u003e2-pole\/3-wire (2P\/3W) configuration covering live, neutral and earth conductors.\u003c\/li\u003e\n  \u003cli\u003ePolyamide (nylon) construction offers good resistance to UV exposure, moisture and mechanical impact.\u003c\/li\u003e\n  \u003cli\u003eProtective cover included to seal the inlet when no cable is connected, reducing ingress of water and debris.\u003c\/li\u003e\n  \u003cli\u003ePanel-mount design for flush or surface installation into bulkheads, enclosures or vehicle bodywork.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.23 kg, keeping overall installation weight low.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 16A shore power plugs and cables used across marine and leisure vehicle applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis inlet provides the fixed connection point on the vessel or vehicle side of a shore power hookup. When a shore cable is plugged in, AC mains power is fed through the inlet to the onboard distribution system, typically via a shore power isolator, RCD or inverter\/charger such as a Victron MultiPlus or Quattro. The polyamide body is well suited to damp and outdoor environments where a metal fitting is not required or preferred.\u003c\/p\u003e\n\n\u003cp\u003eThe 2P\/3W wiring arrangement means the inlet carries a single live conductor, a neutral and a protective earth. This is the standard configuration for single-phase 16A shore connections in leisure marine and caravan use across the UK and EU. The hinged protective cover keeps the socket face clean and dry when the shore cable is disconnected, which matters in exposed deck or exterior panel locations.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHP301603000\u003c\/li\u003e\n  \u003cli\u003eCurrent rating: 16A\u003c\/li\u003e\n  \u003cli\u003eVoltage rating: 250Vac\u003c\/li\u003e\n  \u003cli\u003eConfiguration: 2-pole\/3-wire (2P\/3W)\u003c\/li\u003e\n  \u003cli\u003eBody material: Polyamide (nylon)\u003c\/li\u003e\n  \u003cli\u003eCover: Included\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.23 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076007487\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShore power inlet on sailing yachts, motorboats and canal boats.\u003c\/li\u003e\n  \u003cli\u003eMains AC entry point on motorhomes, campervans and caravans.\u003c\/li\u003e\n  \u003cli\u003ePanel-mounted AC inlet on off-grid cabins, site offices and portable power enclosures.\u003c\/li\u003e\n  \u003cli\u003eReplacement inlet on existing shore power installations where the original fitting has degraded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Power Inlet Polyamide 16A\/250Vac (2P\/3W)\u003c\/li\u003e\n  \u003cli\u003e1 x Protective cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis inlet carries mains AC voltage and must be installed by a qualified electrician or competent marine\/vehicle electrical engineer. On leisure craft, wiring should comply with the relevant BS EN ISO marine electrical standards. On caravans and motorhomes, installation should follow BS 7671 (IET Wiring Regulations) and any applicable leisure vehicle standards. Ensure the inlet is correctly earthed as part of the 2P\/3W circuit. The protective cover should always be closed when the shore cable is not connected.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863718461774,"sku":"SHP301603000","price":52.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHP301603000_-_Power_Inlet_Polyamid_with_cover_16A-250Vac_2p-3w.webp?v=1781183701"},{"product_id":"victron-rj12-utp-cable-0-3m","title":"Victron RJ12 UTP Cable 0,3 m - ASS030066004","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy RJ12 UTP Cable 0.3 m\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy RJ12 UTP Cable is a short-run data cable used to connect compatible Victron devices via RJ12 interface. At 0.3 m, it is suited to panel-mounted or closely spaced installations where a tidy, direct connection is needed between components.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRJ12 connectors on both ends for direct device-to-device data connections.\u003c\/li\u003e\n  \u003cli\u003eUTP (Unshielded Twisted Pair) construction for reliable signal transmission over short distances.\u003c\/li\u003e\n  \u003cli\u003e0.3 m length keeps wiring neat in compact enclosures or closely mounted installations.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, manufactured to match Victron device specifications.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.01 kg, adding negligible weight to any installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eRJ12 is a 6-position, 6-contact (6P6C) connector format used across a range of Victron Energy products for communication and data transfer between devices. This cable provides a direct, plug-and-play connection without the need for custom crimping or field termination.\u003c\/p\u003e\n\n\u003cp\u003eThe 0.3 m length is specifically useful where two Victron units are mounted side by side or within the same enclosure, avoiding excess cable that would need to be managed or coiled. Using the correct Victron-supplied cable ensures pin-out compatibility and avoids the signal issues that can arise from generic or incorrectly wired RJ12 cables.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030066004\u003c\/li\u003e\n  \u003cli\u003eConnector type: RJ12 (6P6C)\u003c\/li\u003e\n  \u003cli\u003eCable type: UTP (Unshielded Twisted Pair)\u003c\/li\u003e\n  \u003cli\u003eCable length: 0.3 m\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.01 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071525\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting Victron Battery Monitors, Colour Control GX units, or other RJ12-compatible Victron devices.\u003c\/li\u003e\n  \u003cli\u003eShort-run data links within battery enclosures or distribution boards.\u003c\/li\u003e\n  \u003cli\u003eReplacement cable for existing Victron installations where the original cable has been lost or damaged.\u003c\/li\u003e\n  \u003cli\u003eOff-grid and marine system builds where multiple Victron components are mounted in close proximity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy RJ12 UTP Cable, 0.3 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable is a plug-and-play accessory requiring no tools or specialist knowledge to fit. Confirm that both devices use a standard RJ12 (6P6C) interface before connecting. If this cable forms part of a wider solar, battery or inverter installation, that work should be carried out by a qualified electrician or MCS-accredited installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863718527310,"sku":"ASS030066004","price":5.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030066004_-_RJ12_UTP_Cable_0_3_m.webp?v=1781183705"},{"product_id":"victron-shore-power-cord-15m-16a-250vac","title":"Victron Shore Power Cord 15m 16A\/250Vac (3x2,5sqmm) - SHP302501500","description":"\u003ch1 style=\"color: #f87c24;\"\u003eShore Power Cord 15m 16A\/250Vac (3x2.5mm²)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Shore Power Cord is a 15-metre mains supply cable rated at 16A\/250Vac, designed for connecting shore power to marine vessels, motorhomes and off-grid installations. Built with 3x2.5mm² conductors, it is suited to professional and trade installations where a reliable, correctly rated shore connection is required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e15-metre cable length provides reach from shore power pedestals to vessel or vehicle inlets without extension leads.\u003c\/li\u003e\n  \u003cli\u003eRated at 16A\/250Vac, suitable for standard single-phase shore power supplies across the UK and EU.\u003c\/li\u003e\n  \u003cli\u003e3x2.5mm² conductor cross-section supports the full 16A rated current without excessive voltage drop over the cable length.\u003c\/li\u003e\n  \u003cli\u003eVictron Energy product, manufactured to consistent quality standards for marine and mobile power applications.\u003c\/li\u003e\n  \u003cli\u003eSKU SHP302501500, GTIN 8719076007517 for straightforward ordering and stock identification.\u003c\/li\u003e\n  \u003cli\u003eCable weight of 2.66kg reflects the substantial copper conductor content and robust outer sheathing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eShore power cords are a critical link between a fixed mains supply and a mobile or floating installation. An undersized or poorly rated cable at this point introduces voltage drop, heat build-up and potential failure under sustained load. This Victron cord uses 2.5mm² conductors throughout, which is the correct minimum cross-section for a 16A circuit at this cable length, keeping resistive losses within acceptable limits.\u003c\/p\u003e\n\n\u003cp\u003eAt 15 metres, the cable is long enough to reach most marina pontoon pedestals or campsite hook-up posts without needing an intermediate extension, which would add resistance and introduce additional connection points. The 16A\/250Vac rating aligns with standard Type 2 shore power pedestals and CEE 16A blue connectors commonly used across European marinas and campsites.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHP302501500\u003c\/li\u003e\n  \u003cli\u003eCable length: 15 metres\u003c\/li\u003e\n  \u003cli\u003eVoltage rating: 250Vac\u003c\/li\u003e\n  \u003cli\u003eCurrent rating: 16A\u003c\/li\u003e\n  \u003cli\u003eConductor cross-section: 3x2.5mm²\u003c\/li\u003e\n  \u003cli\u003eWeight: 2.66kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076007517\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting marina shore power pedestals to yacht or motorboat shore inlets.\u003c\/li\u003e\n  \u003cli\u003eCampsite and motorhome hook-up connections where a 15-metre run is required.\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabins and site offices taking a temporary mains supply from a remote distribution point.\u003c\/li\u003e\n  \u003cli\u003eReplacement or spare shore cord for vessels already fitted with a compatible 16A shore inlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Victron Shore Power Cord, 15m, 16A\/250Vac, 3x2.5mm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable should be connected to a correctly rated shore inlet and used only with a supply protected by an appropriate RCD and overcurrent device at the source. Ensure the shore inlet on the vessel or vehicle is rated to at least 16A and that the connector type is compatible before use. All mains electrical connections on marine vessels should be carried out by a qualified marine electrician in accordance with applicable wiring standards. Do not use this cable with a supply exceeding 250Vac or 16A.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863720755534,"sku":"SHP302501500","price":136.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHP302501500_-_Shore_Power_Cord_15m_16A-250Vac_3x2_5sqmm.webp?v=1781183714"},{"product_id":"vecan-canbus-bms-type-b-cable-1-8m","title":"Victron VE.Can to CAN-bus BMS type B Cable 1,8 m - ASS030720118","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Can to CAN-bus BMS Type B Cable 1.8 m\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Can to CAN-bus BMS Type B Cable connects a Victron VE.Can port to a compatible CAN-bus BMS using the Type B pinout. It is designed for installers integrating third-party battery management systems with Victron equipment where a Type B CAN-bus interface is required.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1.8 m cable length, providing practical reach for panel and cabinet installations.\u003c\/li\u003e\n  \u003cli\u003eType B CAN-bus pinout, compatible with BMS units that use this interface standard.\u003c\/li\u003e\n  \u003cli\u003eConnects directly from a Victron VE.Can port to a CAN-bus BMS without additional adapters.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 75 g, adding minimal weight to an installation.\u003c\/li\u003e\n  \u003cli\u003eVictron part number ASS030720118, ensuring correct identification when ordering for specific system builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVictron Energy produces two CAN-bus BMS cable types to accommodate different BMS manufacturers. Type A and Type B differ in their RJ45 pinout assignments. Using the wrong cable type will prevent communication between the BMS and the Victron system, so confirming the BMS manufacturer's required pinout before ordering is essential. This cable covers the Type B variant.\u003c\/p\u003e\n\n\u003cp\u003eThe cable terminates in RJ45 connectors and carries the CAN-bus communication signals between the VE.Can interface on Victron devices (such as the MultiPlus-II, Quattro, or compatible GX devices) and the battery BMS. Correct BMS communication allows the inverter\/charger to receive charge and discharge limits, state of charge data, and protection signals directly from the battery.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030720118\u003c\/li\u003e\n  \u003cli\u003eCable length: 1.8 m\u003c\/li\u003e\n  \u003cli\u003eInterface: VE.Can (RJ45) to CAN-bus BMS Type B (RJ45)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.075 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071624\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a Type B CAN-bus BMS to a Victron MultiPlus-II or Quattro inverter\/charger via VE.Can.\u003c\/li\u003e\n  \u003cli\u003eIntegrating third-party lithium battery systems with Victron GX devices in off-grid and hybrid installations.\u003c\/li\u003e\n  \u003cli\u003eReplacement cable for existing Victron systems where the original Type B BMS cable has been lost or damaged.\u003c\/li\u003e\n  \u003cli\u003eNew system builds requiring verified Victron-supplied cabling for BMS communication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Can to CAN-bus BMS Type B Cable, 1.8 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eConfirm that your BMS uses the Type B CAN-bus pinout before fitting this cable. Connecting a Type B cable to a Type A BMS will not establish communication and may cause system faults. This cable should be installed as part of a complete Victron system configured by a qualified installer familiar with Victron VE.Can network requirements and the specific BMS being integrated.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863726817614,"sku":"ASS030720118","price":12.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030720118_-_VE.Can_to_CAN-bus_BMS_type_B_Cable_1_8_m.webp?v=1781183777"},{"product_id":"vecan-canbus-bms-type-b-cable-5m","title":"Victron VE.Can to CAN-bus BMS type B Cable 5 m - ASS030720150","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Can to CAN-bus BMS Type B Cable 5 m\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Can to CAN-bus BMS Type B Cable connects Victron devices with a VE.Can port to compatible CAN-bus BMS battery management systems using the Type B protocol. At 5 metres in length, it gives installers practical routing flexibility in battery cabinets, van conversions, marine installations and off-grid enclosures.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnects VE.Can-equipped Victron devices to CAN-bus BMS batteries using the Type B communication protocol.\u003c\/li\u003e\n  \u003cli\u003e5 metre cable length provides flexibility for installations where the BMS and inverter or MPPT are not in close proximity.\u003c\/li\u003e\n  \u003cli\u003ePre-terminated with the correct connectors at each end, requiring no additional crimping or wiring.\u003c\/li\u003e\n  \u003cli\u003eVictron SKU ASS030720150, compatible with the VE.Can interface found on Victron MultiPlus-II GX, Quattro, Cerbo GX and other GX-series devices.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.22 kg, suitable for weight-sensitive installations such as marine and vehicle builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eCAN-bus communication between a battery BMS and an inverter\/charger or GX device allows the BMS to pass real-time data including state of charge, cell voltages, charge and discharge limits, and alarm states. This enables the Victron system to respond dynamically to battery conditions rather than relying on fixed charge parameters. The Type B cable variant is required for BMS units that use the CAN-bus Type B pinout, which differs from Type A in connector wiring. Using the wrong cable type will result in no communication, so confirming the BMS manufacturer's CAN-bus type before ordering is essential.\u003c\/p\u003e\n\n\u003cp\u003eThe 5 m length is the longer of the standard options Victron offers for this cable, making it the appropriate choice where the battery bank and the GX device or inverter are mounted in separate locations. CAN-bus is a differential signalling protocol and is generally tolerant of cable runs at this length, provided the bus is correctly terminated at both ends as required by the system design.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030720150\u003c\/li\u003e\n  \u003cli\u003eCable length: 5 m\u003c\/li\u003e\n  \u003cli\u003eProtocol: CAN-bus BMS Type B\u003c\/li\u003e\n  \u003cli\u003eInterface: VE.Can (RJ45) to CAN-bus BMS Type B connector\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.22 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076071631\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a Victron Cerbo GX or GX-series device to a CAN-bus Type B BMS battery system.\u003c\/li\u003e\n  \u003cli\u003eLinking a Victron MultiPlus-II GX or Quattro GX to a compatible third-party lithium battery with CAN-bus Type B communication.\u003c\/li\u003e\n  \u003cli\u003eOff-grid and hybrid solar installations where the battery BMS and inverter\/charger are mounted at a distance from one another.\u003c\/li\u003e\n  \u003cli\u003eMarine and vehicle installations requiring a longer cable run between the battery management system and the Victron control device.\u003c\/li\u003e\n  \u003cli\u003eBattery cabinet builds where cable routing adds to the required run length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Can to CAN-bus BMS Type B Cable, 5 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eBefore installation, confirm that your BMS uses the CAN-bus Type B pinout. Connecting a Type B cable to a Type A BMS port will not establish communication and may cause issues depending on the hardware involved. CAN-bus networks require correct termination at both ends of the bus; refer to your BMS and Victron device documentation to confirm termination requirements for your specific system topology. Installation within a solar PV or battery storage system should be carried out by a qualified electrician or accredited installer familiar with Victron equipment.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863727014222,"sku":"ASS030720150","price":10.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030720150_-_VE.Can_to_CAN-bus_BMS_type_B_Cable_5_m.webp?v=1781183781"},{"product_id":"vecan-nmea2000-micro-c-male-cable-victron","title":"Victron VE.Can to NMEA2000 Micro-C male - ASS030520200","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Can to NMEA 2000 Micro-C Male Cable\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Can to NMEA 2000 Micro-C Male cable connects Victron Energy devices with a VE.Can port directly to an NMEA 2000 network backbone. It is aimed at marine installers and off-grid professionals who need to integrate Victron equipment into an existing vessel network without additional adaptors or converters.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnects VE.Can-equipped Victron devices to a standard NMEA 2000 network backbone.\u003c\/li\u003e\n  \u003cli\u003eMicro-C male connector on the NMEA 2000 end, compatible with standard Micro-C backbone sockets and T-pieces.\u003c\/li\u003e\n  \u003cli\u003eAllows Victron system data (battery state, inverter status, charger data) to be broadcast over the vessel's NMEA 2000 network.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 59 g, suitable for installation in confined cable runs typical of marine environments.\u003c\/li\u003e\n  \u003cli\u003eVictron part number ASS030520200, designed specifically for use with Victron VE.Can port hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Can is Victron's CAN-bus based communication interface, used across a range of their products including MultiPlus-II, Quattro, Cerbo GX and various MPPT charge controllers. NMEA 2000 is the marine industry standard network protocol for sharing data between onboard electronics such as chartplotters, displays and monitoring systems. This cable bridges the two, allowing Victron system data to appear on compatible NMEA 2000 displays without requiring a separate gateway device.\u003c\/p\u003e\n\n\u003cp\u003eThe Micro-C connector format is the most widely used physical standard on NMEA 2000 networks in the marine sector. Using a male Micro-C termination on the NMEA 2000 end means this cable connects directly into a standard T-piece or backbone drop point. This is a straightforward, single-cable solution for integrating Victron equipment into a vessel's existing network infrastructure.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030520200\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019534\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.059 kg\u003c\/li\u003e\n  \u003cli\u003eVE.Can connector on Victron device end\u003c\/li\u003e\n  \u003cli\u003eMicro-C male connector on NMEA 2000 network end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrating a Cerbo GX or CCGX into a vessel's NMEA 2000 network for system-wide monitoring.\u003c\/li\u003e\n  \u003cli\u003eDisplaying Victron battery, inverter or charger data on a compatible marine chartplotter or multifunction display.\u003c\/li\u003e\n  \u003cli\u003eMarine off-grid and hybrid power systems where Victron equipment must communicate with existing onboard electronics.\u003c\/li\u003e\n  \u003cli\u003eSailing and motor vessel installations requiring consolidated data across navigation and power management systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Can to NMEA 2000 Micro-C Male cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable should be installed by a qualified marine electrician familiar with both NMEA 2000 network topology and Victron VE.Can configuration. Ensure the NMEA 2000 network is correctly terminated at both ends of the backbone before connecting additional drop devices. Verify that the Victron device's VE.Can port is enabled and configured correctly in VictronConnect or Venus OS prior to use. Do not connect this cable to a powered backbone without confirming network load and termination resistance are within NMEA 2000 specification.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863727210830,"sku":"ASS030520200","price":51.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030520200_-_VE.Can_to_NMEA2000_Micro-C_male.webp?v=1781183785"},{"product_id":"ve-direct-cable-0-3m-right-angle-victron","title":"Victron VE.Direct Cable 0,3m (one side Right Angle conn) - ASS030531203","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct Cable 0.3m (One Side Right Angle Connector)\u003c\/h1\u003e\n\n\u003cp\u003eA short VE.Direct cable for connecting Victron Energy devices in space-constrained installations. One end features a right angle connector, allowing the cable to exit the port at 90 degrees rather than straight out. Suited to professional installers working in enclosures, panels or mounting arrangements where cable routing clearance is limited.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e0.3m cable length, designed for short-run connections between adjacent Victron devices.\u003c\/li\u003e\n  \u003cli\u003eOne right angle connector allows the cable to exit the device port at 90 degrees, reducing the depth required behind the unit.\u003c\/li\u003e\n  \u003cli\u003eStandard straight connector on the opposite end for conventional port entry.\u003c\/li\u003e\n  \u003cli\u003eUses the VE.Direct proprietary interface, compatible with Victron devices that carry a VE.Direct port.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 15g, with no additional bulk in tight wiring runs.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030531203 | GTIN: 8719076019657\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's point-to-point serial communication protocol, used to transfer data between compatible devices such as MPPT solar charge controllers, BMV battery monitors, Phoenix inverters and colour control displays. This 0.3m cable is the shortest in the VE.Direct cable range, intended for installations where two devices are mounted directly alongside each other and a longer cable would create unnecessary slack.\u003c\/p\u003e\n\n\u003cp\u003eThe right angle connector on one end is particularly useful when a device is mounted flush against a wall, inside a cabinet, or in a DIN rail enclosure where a straight-exit cable would either not fit or would place stress on the port. The 90-degree exit keeps the cable profile low and avoids bending strain at the connector body.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCable length: 0.3m\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (one straight, one right angle)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.015kg (15g)\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030531203\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019657\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a Victron MPPT charge controller to a Cerbo GX or Colour Control GX mounted in the same enclosure.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a display unit or GX device in a compact panel build.\u003c\/li\u003e\n  \u003cli\u003eShort-run data connections in van conversions, narrowboats and marine installations where space behind devices is restricted.\u003c\/li\u003e\n  \u003cli\u003eAny VE.Direct installation where the device is wall- or cabinet-mounted and a straight connector would protrude into restricted clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x VE.Direct cable, 0.3m, with one right angle connector and one straight connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure both devices are powered down before connecting or disconnecting VE.Direct cables. This cable is for data communication only and does not carry power to connected devices. Confirm that both devices in the connection carry a VE.Direct port before purchase, as the interface is not interchangeable with other Victron communication protocols such as VE.Bus or VE.Can.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863727440206,"sku":"ASS030531203","price":8.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030531203_-_VE.Direct_Cable_0_3m_one_side_Right_Angle_conn.webp?v=1781183789"},{"product_id":"ve-direct-cable-10m-right-angle","title":"Victron VE.Direct Cable 10m (one side Right Angle conn) - ASS030531320","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct Cable 10m (One Side Right Angle Connector)\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Direct Cable with a right angle connector on one side is a 10-metre data cable for connecting Victron Energy devices that use the VE.Direct communication port. It is suited to installations where cable routing or enclosure layouts make a straight connector impractical.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10-metre cable length, providing reach for installations where devices are mounted at a distance from each other.\u003c\/li\u003e\n  \u003cli\u003eOne right angle VE.Direct connector, allowing the cable to exit the port at 90 degrees to reduce strain and improve routing in tight spaces.\u003c\/li\u003e\n  \u003cli\u003eOne straight VE.Direct connector on the opposite end for standard port connections.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Victron devices equipped with a VE.Direct port, including BMV battery monitors, SmartSolar MPPT charge controllers, and Phoenix inverters.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030531320 | GTIN: 8719076019701\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's point-to-point serial communication protocol used across a wide range of their product line. This cable carries data between a VE.Direct-equipped device and a compatible interface, such as the VE.Direct to USB adapter, the Color Control GX, or a Raspberry Pi running Venus OS. It does not carry power for charging; it is a data-only connection.\u003c\/p\u003e\n\n\u003cp\u003eThe right angle connector on one end is particularly useful when a device is mounted flush against a panel, inside a cabinet, or in any position where a straight connector would create a sharp bend in the cable or prevent the enclosure from closing properly. At 10 metres, this cable suits larger installations such as off-grid cabins, marine vessels, or commercial battery rooms where components are spread across a space.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCable length: 10 metres\u003c\/li\u003e\n  \u003cli\u003eConnector type (end 1): VE.Direct right angle\u003c\/li\u003e\n  \u003cli\u003eConnector type (end 2): VE.Direct straight\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.355 kg\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030531320\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019701\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a SmartSolar MPPT charge controller to a Color Control GX or Cerbo GX in a remote or distributed panel layout.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a VE.Direct to USB interface for PC-based monitoring.\u003c\/li\u003e\n  \u003cli\u003eRouting data cables neatly inside battery enclosures or switchboards where straight connectors would obstruct panel closure.\u003c\/li\u003e\n  \u003cli\u003eMarine and motorhome installations where devices are mounted in confined spaces with restricted cable exit angles.\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabin or commercial installations requiring longer cable runs between monitoring and control equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Direct Cable, 10m, with one right angle connector and one straight connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis is a data cable and carries no mains or battery voltage. It can be installed without specialist electrical qualifications, though it should be routed away from high-current DC cables where possible to avoid interference. Ensure the VE.Direct ports on both connected devices are unpowered or in a safe state before connecting or disconnecting the cable. For wider system integration involving inverters, battery banks, or grid-connected equipment, a qualified installer should be engaged.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863727669582,"sku":"ASS030531320","price":12.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030531320_-_VE.Direct_Cable_10m_one_side_Right_Angle_conn.webp?v=1781183793"},{"product_id":"ve-direct-cable-3m-right-angle","title":"Victron VE.Direct Cable 3m (one side Right Angle conn) - ASS030531230","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct Cable 3m (One Side Right Angle Connector)\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Direct Cable with a right angle connector on one side is a 3-metre data cable for connecting Victron Energy devices that use the VE.Direct communication port. It is designed for installations where a straight connector would create an awkward bend or put strain on the port, making it a practical choice for panel-mounted or recessed equipment.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-metre cable length provides flexibility in routing between devices and monitoring equipment.\u003c\/li\u003e\n  \u003cli\u003eOne right angle connector reduces mechanical stress on the VE.Direct port in tight or recessed installations.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Victron devices featuring a VE.Direct port, including BMV battery monitors, SmartSolar MPPT controllers, and Phoenix inverters.\u003c\/li\u003e\n  \u003cli\u003eCarries serial communication data between VE.Direct-equipped devices and interfaces such as the Color Control GX, GlobalLink 520, or a PC via USB adaptor.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.105 kg, with a low-profile right angle connector suited to enclosure or cabinet installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's proprietary serial communication protocol used across a wide range of their product line. This cable carries data between a VE.Direct-equipped device and a GX device, a VE.Direct to USB interface, a VE.Direct Bluetooth Smart dongle, or similar accessories. It does not carry power to the connected devices; it is a data-only cable.\u003c\/p\u003e\n\n\u003cp\u003eThe right angle connector on one end is particularly useful where the VE.Direct port faces a wall, panel surface, or enclosure side, and a straight plug would either not fit or would apply lateral force to the connector over time. The straight connector on the opposite end connects to the monitoring or interface device in the normal orientation. At 3 metres, the cable gives sufficient reach for most cabinet and wall-mounted system layouts without excess slack.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030531230\u003c\/li\u003e\n  \u003cli\u003eCable length: 3 metres\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (one straight, one right angle)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.105 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019688\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a SmartSolar MPPT charge controller to a Cerbo GX or Venus GX in a wall-mounted enclosure.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV-700 or BMV-712 battery monitor to a Color Control GX where the port orientation requires a right angle connector.\u003c\/li\u003e\n  \u003cli\u003eConnecting a Phoenix inverter to a VE.Direct to USB interface for PC-based monitoring.\u003c\/li\u003e\n  \u003cli\u003eAny VE.Direct installation where cable routing runs parallel to the device face and a straight connector would create a sharp bend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Direct Cable, 3m, with one right angle connector and one straight connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure the VE.Direct ports on both devices are unpowered or in a safe state before connecting. The VE.Direct connector is keyed and should seat firmly without force. Do not use this cable for power delivery. For system commissioning involving grid-tied inverters or high-voltage battery systems, installation should be carried out by a qualified electrician or MCS-accredited installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863727800654,"sku":"ASS030531230","price":10.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030531230_-_VE.Direct_Cable_3m_one_side_Right_Angle_conn.webp?v=1781183797"},{"product_id":"victron-ve-direct-cable-5m-right-angle","title":"Victron VE.Direct Cable 5m (one side Right Angle conn) - ASS030531250","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct Cable 5m (One Side Right Angle Connector)\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Direct Cable with a 5m length and one right angle connector is a data communication cable for connecting Victron Energy devices that use the VE.Direct interface. It is suited to installations where the connected device is mounted flush against a wall, panel or enclosure, and a straight connector would create excessive strain or prevent a clean cable run.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5m cable length provides reach for installations where devices are not co-located.\u003c\/li\u003e\n  \u003cli\u003eOne right angle connector allows connection to devices mounted close to a surface, reducing cable stress at the port.\u003c\/li\u003e\n  \u003cli\u003eOne straight connector on the opposite end for the second device in the communication chain.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Victron devices that use the VE.Direct communication port, including BMV battery monitors, SmartSolar MPPT charge controllers and Phoenix inverters.\u003c\/li\u003e\n  \u003cli\u003eCarries data only, not power. Used for monitoring, configuration and communication between VE.Direct-equipped devices and interfaces such as the VE.Direct to USB adapter or Raspberry Pi.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030531250. GTIN: 8719076019695.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's proprietary serial communication protocol used across a wide range of their products. This cable provides the physical link between two VE.Direct ports, enabling data exchange for monitoring, programming and integration with systems such as Venus OS or the VictronConnect app via a USB adapter.\u003c\/p\u003e\n\n\u003cp\u003eThe right angle connector on one end is particularly useful when a device is recessed, panel-mounted or positioned with limited clearance behind it. A straight connector in that situation places lateral stress on the port and can cause intermittent connections over time. The right angle design routes the cable away from the device face at 90 degrees, keeping the installation tidy and reducing mechanical load on the connector.\u003c\/p\u003e\n\n\u003cp\u003eAt 5m, this cable suits larger installations where the monitoring device, display or interface adapter is not immediately adjacent to the charge controller or battery monitor. It is long enough to route neatly through a cabinet or across a battery compartment without requiring cable extensions.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCable length: 5m\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (one straight, one right angle)\u003c\/li\u003e\n  \u003cli\u003eProtocol: VE.Direct serial communication\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.225 kg\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030531250\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019695\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a SmartSolar MPPT charge controller to a Cerbo GX or other Venus OS device.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV battery monitor to a VE.Direct to USB interface for PC-based monitoring.\u003c\/li\u003e\n  \u003cli\u003eIntegrating a Phoenix inverter into a VE.Direct monitoring chain.\u003c\/li\u003e\n  \u003cli\u003eOff-grid and marine installations where devices are spread across a panel or battery bank enclosure.\u003c\/li\u003e\n  \u003cli\u003eConnecting VE.Direct devices to a Raspberry Pi running Venus OS for custom monitoring setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Direct Cable, 5m, one right angle connector and one straight connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable carries data only and does not require any electrical isolation or fusing. Ensure the VE.Direct ports on both devices are free from debris before connecting. Do not force the connectors; they are keyed and should seat firmly without excessive pressure. For permanent installations, secure the cable with appropriate cable management to avoid strain on the ports over time. No specialist electrical qualification is required to connect VE.Direct cables, but any associated inverter, battery or solar PV wiring should be carried out by a qualified installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863727964494,"sku":"ASS030531250","price":10.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030531250_-_VE.Direct_Cable_5m_one_side_Right_Angle_conn.webp?v=1781183800"},{"product_id":"victron-ve-direct-non-inverting-remote-on-off-cable","title":"Victron VE.Direct non-inverting remote on-off cable - ASS030550320","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct Non-Inverting Remote On-Off Cable\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Direct non-inverting remote on-off cable allows external control of compatible Victron Energy devices via the VE.Direct port. It is designed for installers who need to enable or disable a device remotely without inverting the logic signal, keeping control behaviour straightforward and predictable.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-inverting logic: a high signal on the control input turns the device on, a low signal turns it off, matching standard remote switching conventions.\u003c\/li\u003e\n  \u003cli\u003eConnects directly to the VE.Direct port on compatible Victron devices, requiring no additional interface hardware.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.11 kg, suitable for compact panel builds and enclosure installations.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron devices that support remote on-off control via the VE.Direct interface.\u003c\/li\u003e\n  \u003cli\u003eSKU ASS030550320, GTIN 8719076036494, supplied as a ready-to-use cable assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe VE.Direct port on Victron devices carries both communication data and remote control signals. This cable exposes the remote on-off lines so that an external switch, relay, or control signal can start or stop the connected device. The non-inverting configuration means the logic follows the input directly: no additional inversion circuitry is needed in the control wiring.\u003c\/p\u003e\n\n\u003cp\u003eThis is particularly useful in automated systems where a battery management system, programmable logic controller, or simple manual switch needs to control a Victron MPPT charger or similar device. Using the VE.Direct port for this purpose avoids the need to interrupt power wiring, which keeps the installation cleaner and reduces the risk of wiring errors.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030550320\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076036494\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.11 kg\u003c\/li\u003e\n  \u003cli\u003eInterface: VE.Direct\u003c\/li\u003e\n  \u003cli\u003eLogic type: Non-inverting remote on-off\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRemote on-off control of Victron MPPT solar charge controllers in off-grid and marine installations.\u003c\/li\u003e\n  \u003cli\u003eIntegration with external BMS or relay outputs to automate device switching based on battery state.\u003c\/li\u003e\n  \u003cli\u003eManual remote switching of Victron devices from a panel-mounted switch without interrupting power cables.\u003c\/li\u003e\n  \u003cli\u003eAutomated control in campervan, narrowboat, and off-grid cabin systems where a PLC or timer controls charge cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Direct non-inverting remote on-off cable (ASS030550320)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eVerify that the target Victron device supports remote on-off control via its VE.Direct port before installation. Connect the control input to a signal source within the voltage range specified for the device. Although this cable is a low-voltage accessory, it should be installed as part of a wider system by a qualified electrician or experienced installer familiar with Victron equipment. For any grid-connected or high-voltage battery installations, a qualified installer is required.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863728128334,"sku":"ASS030550320","price":15.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030550320_-_VE.Direct_non-inverting_remote_on-off_cable.webp?v=1781183804"},{"product_id":"vedirect-tx-digital-output-cable-victron","title":"Victron VE.Direct TX digital output cable - ASS030550500","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct TX Digital Output Cable\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Direct TX digital output cable connects to the TX pin of a VE.Direct port on compatible Victron devices, converting it into a programmable digital output. It is used by installers who need to trigger external loads, relays or lighting controllers directly from a Victron MPPT solar charger or other VE.Direct-equipped device.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAccesses the TX pin of the VE.Direct interface to provide a programmable digital output signal.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron MPPT solar chargers and other devices that expose a configurable TX pin via VE.Direct.\u003c\/li\u003e\n  \u003cli\u003eAllows the TX pin to be configured for functions such as load output control or streetlight dimming pulses, depending on the connected device's firmware.\u003c\/li\u003e\n  \u003cli\u003eLightweight and compact at 0.04 kg, suitable for tight enclosure installations.\u003c\/li\u003e\n  \u003cli\u003eSKU: ASS030550500. GTIN: 8719076019855.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe VE.Direct port on Victron MPPT chargers and similar devices includes a TX pin that can be configured in software to output a digital signal. Without this cable, that pin is inaccessible for external wiring. This cable provides a terminated, ready-to-connect lead from that TX pin, making it straightforward to wire the output to a relay, LED driver or other low-voltage control circuit.\u003c\/p\u003e\n\n\u003cp\u003eConfiguration of the TX pin function is handled through the VictronConnect app or MPPT firmware settings. Common uses include a 0 to 100% PWM dimming signal for streetlight control, or a simple on\/off output tied to the charger's load output state. The cable itself is passive; the behaviour depends entirely on how the TX pin is configured on the source device.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030550500\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019855\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.04 kg\u003c\/li\u003e\n  \u003cli\u003eInterface: VE.Direct TX pin\u003c\/li\u003e\n  \u003cli\u003eSignal type: Digital output (behaviour determined by device firmware configuration)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStreetlight dimming control via PWM signal from a Victron MPPT charger.\u003c\/li\u003e\n  \u003cli\u003eTriggering an external relay based on the MPPT load output state.\u003c\/li\u003e\n  \u003cli\u003eIntegrating Victron MPPT chargers with third-party lighting controllers or load management devices.\u003c\/li\u003e\n  \u003cli\u003eOff-grid systems requiring automated load switching without a separate controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Direct TX digital output cable (ASS030550500)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cable connects to the VE.Direct port of a compatible Victron device. Ensure the TX pin function is correctly configured in VictronConnect or the device's settings before connecting any external load or relay. The digital output signal is low voltage; however, any wiring into a live off-grid or solar system should be carried out by a qualified installer. Do not exceed the signal voltage or current ratings specified for the TX pin of the connected device.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863741006158,"sku":"ASS030550500","price":7.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030550500_-_VE.Direct_TX_digital_output_cable.webp?v=1781183916"},{"product_id":"cee-16a-to-32a-shore-power-adapter-cord-250v","title":"Victron Adapter Cord 16A to 32A\/250V-CEE Plug 16A\/CEE Coupling 32A - SHP307700280","description":"\u003ch1 style=\"color: #f87c24;\"\u003eAdapter Cord 16A to 32A\/250V – CEE Plug 16A \/ CEE Coupling 32A\u003c\/h1\u003e\n\n\u003cp\u003eThis Victron Energy adapter cord allows a 16A CEE plug to connect to a 32A CEE shore power socket. It is designed for marine, motorhome and off-grid installations where the available shore power outlet rating does not match the vessel or vehicle's inlet rating.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts a 16A CEE plug connection to a 32A CEE coupling, allowing use of 32A shore power sockets with a 16A supply cord.\u003c\/li\u003e\n  \u003cli\u003eRated at 250V, suitable for standard single-phase European shore power supplies.\u003c\/li\u003e\n  \u003cli\u003eCEE industrial connector format on both ends, providing a weatherproof and secure connection.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 0.3 kg, suitable for storage aboard a vessel or in a vehicle.\u003c\/li\u003e\n  \u003cli\u003eVictron Energy component, manufactured to consistent quality standards for use in marine and mobile power systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eShore power connections in marinas, campsites and off-grid sites do not always match the inlet specification of the boat or vehicle being powered. This adapter cord bridges the gap between a 16A CEE plug (the supply side) and a 32A CEE coupling (the socket side), allowing a 16A-rated shore cord to plug into a 32A outlet. The current draw remains limited to 16A by the plug rating, so this adapter does not increase the available current capacity.\u003c\/p\u003e\n\n\u003cp\u003eThe CEE (IEC 60309) connector format is the standard for industrial and marine shore power across Europe. Both ends of this adapter use the blue 250V single-phase CEE format, with the plug end rated at 16A and the coupling end rated at 32A. This makes it a practical carry-on item for situations where the available shore power pedestal has only a 32A socket.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHP307700280\u003c\/li\u003e\n  \u003cli\u003ePlug: CEE 16A \/ 250V (male)\u003c\/li\u003e\n  \u003cli\u003eCoupling: CEE 32A \/ 250V (female)\u003c\/li\u003e\n  \u003cli\u003eVoltage rating: 250V\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.3 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076007616\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMarine vessels with a 16A shore power inlet connecting to a 32A marina pedestal socket.\u003c\/li\u003e\n  \u003cli\u003eMotorhomes and campervans equipped with a 16A shore cord needing access to a 32A campsite supply.\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabins or temporary installations where the available supply socket is 32A CEE but the load cord is 16A.\u003c\/li\u003e\n  \u003cli\u003eHire fleets and service engineers carrying adapters to cover mismatched shore power connections on site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Adapter Cord with 16A CEE plug and 32A CEE coupling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis adapter does not increase the current capacity of the supply cord. The circuit remains limited to 16A as determined by the plug and any upstream protection. Ensure the shore power supply is switched off before connecting or disconnecting. For permanent or fixed shore power installations on vessels, connection should be carried out by a qualified marine electrician in accordance with applicable wiring standards.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59866747994446,"sku":"SHP307700280","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHP307700280_-_Adapter_Cord_16A_to_32A-250V-CEE_Plug_16A-CEE_Coupling_32A.webp?v=1781200241"},{"product_id":"cee-16a-schuko-adapter-cord-250v-victron","title":"Victron Adapter Cord 16A\/250V-CEE plug\/Schuko Coupling - SHP307700260","description":"\u003ch1 style=\"color: #f87c24;\"\u003eAdapter Cord 16A\/250V CEE Plug to Schuko Coupling\u003c\/h1\u003e\n\n\u003cp\u003eThis adapter cord converts a CEE 16A\/250V shore power plug to a Schuko (Type F) coupling, allowing connection between CEE shore power sources and Schuko-terminated equipment or inlets. It is suited to marine, motorhome and off-grid installations where mixed connector standards are in use.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRated at 16A and 250V AC for standard single-phase shore power applications.\u003c\/li\u003e\n  \u003cli\u003eCEE plug (IEC 60309 blue, 2P+E) on one end for connection to shore power pedestals and campsite hookups.\u003c\/li\u003e\n  \u003cli\u003eSchuko (Type F) coupling on the other end for compatibility with European domestic and marine equipment inlets.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 0.3 kg, suitable for storage aboard a vessel or in a vehicle.\u003c\/li\u003e\n  \u003cli\u003eVictron Energy part, designed for use within Victron shore power and AC distribution systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eCEE and Schuko connectors are both common in European shore power and off-grid installations, but they are not directly compatible. This adapter cord bridges the two standards, allowing a CEE 16A shore supply to feed equipment or an inlet wired with a Schuko connector. This is a practical requirement on boats, campervans and static off-grid setups where the available shore supply uses a CEE pedestal but the onboard wiring terminates in a Schuko socket.\u003c\/p\u003e\n\n\u003cp\u003eThe 16A\/250V rating matches the standard single-phase shore power rating used across most European marinas, campsites and temporary site supplies. The cord is not intended for continuous high-load industrial use, but is well suited to the intermittent connection cycles typical of leisure and light commercial applications.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SHP307700260\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076007609\u003c\/li\u003e\n  \u003cli\u003eRated current: 16A\u003c\/li\u003e\n  \u003cli\u003eRated voltage: 250V AC\u003c\/li\u003e\n  \u003cli\u003ePlug type: CEE 16A (IEC 60309, 2P+E, blue)\u003c\/li\u003e\n  \u003cli\u003eCoupling type: Schuko (Type F)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a boat or narrowboat to a CEE shore power pedestal via a Schuko inlet.\u003c\/li\u003e\n  \u003cli\u003eAdapting campsite or marina CEE hookup points for use with Schuko-terminated motorhome or caravan inlets.\u003c\/li\u003e\n  \u003cli\u003eTemporary site power connections where CEE supply and Schuko equipment are in use together.\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabins and static installations requiring a CEE-to-Schuko interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Adapter Cord 16A\/250V CEE Plug to Schuko Coupling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis cord is a plug-and-use adapter and does not require hardwired installation. Ensure the shore supply is isolated before connecting or disconnecting. Verify that the supply voltage and frequency are compatible with the connected equipment before use. For permanent or semi-permanent shore power installations on vessels, connection to the onboard AC distribution system should be carried out by a qualified marine electrician or competent person familiar with the relevant wiring regulations.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59866748027214,"sku":"SHP307700260","price":17.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHP307700260_-_Adapter_Cord_16A-250V-CEE_plug-Schuko_Coupling.webp?v=1781200245"},{"product_id":"victron-galvanic-isolator-vdi-32a","title":"Victron Galvanic Isolator VDI-32 A - GDI000032000","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Galvanic Isolator VDI-32A\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy Galvanic Isolator VDI-32A protects boat hulls, marina pontoons and shore-connected vessels from galvanic corrosion caused by stray DC currents travelling through the shore power earth conductor. It is designed for marine shore power installations where a continuous earth connection is required for safety but galvanic current flow must be blocked.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRated at 32A continuous current, suitable for single-phase shore power connections up to 32A.\u003c\/li\u003e\n  \u003cli\u003eBlocks DC galvanic currents while maintaining a safe AC earth path in compliance with shore power wiring requirements.\u003c\/li\u003e\n  \u003cli\u003eUses a dual blocking diode arrangement to prevent galvanic current flow in both directions without interrupting the protective earth.\u003c\/li\u003e\n  \u003cli\u003eCompact, robust enclosure weighing 2.3 kg, suitable for installation in engine rooms and electrical panels aboard vessels.\u003c\/li\u003e\n  \u003cli\u003eManufactured by Victron Energy, a recognised supplier of marine and off-grid electrical equipment.\u003c\/li\u003e\n  \u003cli\u003eSKU: GDI000032000 | GTIN: 8719076022381\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eWhen a vessel is connected to shore power, the earth conductor creates a continuous metallic path between the boat and the marina's earthing system. Where multiple vessels share the same marina earth, small DC voltage differences between boats cause galvanic currents to flow. Over time, these currents cause accelerated corrosion of underwater metalwork including propellers, shafts, anodes and hull fittings. The VDI-32A is wired into the shore power earth conductor to block these DC currents at source.\u003c\/p\u003e\n\n\u003cp\u003eThe isolator uses a back-to-back diode configuration. Under normal AC fault conditions, the diodes conduct and the protective earth remains fully functional, preserving the safety integrity of the shore power circuit. Under the low-level DC conditions that drive galvanic corrosion, the diodes block current flow. This approach meets the requirements of standards that prohibit the use of simple isolating switches or fuses in the earth conductor of a shore power circuit.\u003c\/p\u003e\n\n\u003cp\u003eAt 32A, the VDI-32A is rated for the most common shore power circuit size used in European marinas. It is a passive device requiring no power supply, control wiring or commissioning beyond correct installation in the earth conductor.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: Galvanic Isolator VDI-32A\u003c\/li\u003e\n  \u003cli\u003eSKU: GDI000032000\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076022381\u003c\/li\u003e\n  \u003cli\u003eContinuous current rating: 32A\u003c\/li\u003e\n  \u003cli\u003eWeight: 2.3 kg\u003c\/li\u003e\n  \u003cli\u003eManufacturer: Victron Energy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSailing yachts and motor cruisers connected to marina shore power.\u003c\/li\u003e\n  \u003cli\u003eCanal boats and narrowboats on shore power hookup at marinas or moorings.\u003c\/li\u003e\n  \u003cli\u003eCommercial vessels requiring galvanic protection at berth.\u003c\/li\u003e\n  \u003cli\u003eMarina electrical installations where multiple vessels share a common earth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy Galvanic Isolator VDI-32A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe VDI-32A must be installed by a qualified marine electrician in accordance with the relevant shore power wiring standards for your vessel type and flag state. The isolator is wired into the shore power earth conductor only. Incorrect installation in the live or neutral conductors will create a serious safety hazard. Do not install any switching device, fuse or circuit breaker in series with the earth conductor in place of or alongside this unit without confirming compliance with applicable standards. Verify that the shore power circuit is rated at 32A or below before installation.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59866753368398,"sku":"GDI000032000","price":202.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_GDI000032000_-_Galvanic_Isolator_VDI-32_A.webp?v=1781200355"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/collections\/Victron_Energy_Logo_svg_8373947f-82ba-43d6-8f82-ecf42399c606.png?v=1781011791","url":"https:\/\/voltaconsolar.com\/collections\/victron-miscellaneous.oembed?page=2","provider":"VoltaconSolar","version":"1.0","type":"link"}