Hybrid 5.5kW-E - Single Phase Solar Inverter HSI5000 48VDC. VDE0121 G99 G100 Compliant
Hybrid Solar Inverter with Energy Storage and integrated battery charger. G98/G99 and G100 Compliant. It is compatible with lithium ion and GEL Batteries. BMS ready with Pylontech US2000C, US3000C, US5000 and Voltacon 2.4kWh & 5.12kWh
Hybrid Solar Inverter 5.5kW for Energy Storage & integrated battery charger.
The Voltasol range of inverters received a new certificate to comply with the engineering recommendation G98 & G99. The new version 5.5kW-E, is suitable for connection in parallel with the public grid. That means it works as a grid-tie inverter with direct consumption of the produced electricity from the solar panels. The excessive energy will be fed back to the grid or stored in battery banks. If there is no need to export the electricity to the DNO, then the inverter will be automatically disconnected.
As a trully versatile product it is made for grid-tied and off grid applications (in case you need to power AC-loads autonomously). This inverter is the most powerful in its class because it supports up to 6500Watt of photovoltaic arrays. The maximum permissible voltage from solar panels is 500V.
Remain Electrified All the Time
When the mains electricity fails the hybrid systems will switch to the energy storage (batteries) and operate as a traditional off-grid inverter. This is the back-up operating mode.
New Features of the 5.5kW-Plus
- Dual AC input grid + generator terminals
- EMS port for emergency light loads 230V/5A
- High current charging up to 120A
- Compatible with Lithium and Lead Acid Batteries.
- G99, G98, VDE0121-1-1 certified product
- Digital Signal Processing (DPS) controlled
- Pure and stable sinewave output, clean from harmonics
Stay Connected with Your Power Station
The SolarPower monitoring softward with the bundle of Wi-Fi card and Modbus servers allow the users to control and watch their PV-plant from anywhere in the world.
3 Mains Operating Modes
- Grid-Tied
- Off-Grid
- Grid-Tied with Battery Back-Up
The energy cycle illustrated in a diagram. Generation | Consumption | Storage
Download
Voltacon Hybrid Inverter 5kW G99 compliant certificate
Compliance Certificate with ENA EREC G100
Installation Manual and User's Guide for 5.5kW Hybrid Inverter.
G99 & G98 Compliant
MODEL |
VOLTASOL Hybrid 5500Watt |
|
Max PV Array Power | 6500W | |
Rated Output Power | 5500W | |
Maximum Charging Power | 2880W | |
Maximum PV Array Open Circuit | 500VDC | |
MPPT Range | 120-450VDC | |
Start Up Volts | 116 VDC / 150 VDC | |
Number of MPP Tracker (Dual) | 2x 13A MPPT | |
Nominal DC Voltage | 360VDC | |
GRID TIE OPERATION | ||
Voltage | 202/208/220/230/240 VAC | |
Output Voltage Range | 184 - 264.5 VAC or 195.5 - 253 VAC (Selectable) | |
European Efficiency Vnominal | 95% | |
Efficiency | 96% | |
Nominal Output Current | 23.9A | |
Power Factor | 0.99 | |
OFF GRID OPERATION - HYBRID | ||
GRID INPUT | ||
AC Voltage Regulation (Batt. Mode) | 90 - 280 VAC or 170- 280 VAC | |
Frequency Range | 50Hz/60Hz Autosense | |
Maximum AC Input Current | 40A | |
BATTERY MODE AC OUTPUT | ||
Nominal Output Voltage | 220/230/240 VAC | |
Output Waveform | Pure Sine Wave | |
Efficiency (DC to AC) | 93% | |
BATTERY & CHARGER | ||
Nominal DC Voltage | 48V | |
Maximum Solar Charge Current | 60A | |
Maximum AC Charge Current | 40A | |
Maximum Charge Current | 100A | |
GENERAL SPECS. | ||
PHYSICAL | ||
Dimension, D X W X H (mm) | 110 x 450 x 445mm | |
Net Weight (kgs) | 16kg | |
INTERFACE | ||
Parallel Function | N/A | |
External Safety Box Optional | Optional SNMP, Modbus and AS-400 cards available | |
Communication | USB or RS232 | |
OPERATING ENVIRONMENT | ||
Humidity | 0% to 95% Relative Humidity(Non-condensing) | |
Operating Temperature | 0℃ to 40℃ | |
Storage Temperature | -15℃ to 60℃ |