Global Delivery Available
Solar Experts Since 2002
5 Year Extended Warranty15kW Conversol Off Grid Inverter 240A Combined Charging Current
The most powerful combination of 3 off grid inverters that can be configured in single and three-phase systems.
15kW Conversol Inverters with MPPT Chargers & Bluetooth Connection - 48V
A complete set of 3 power inverters with parallel kits
The 5048-B-P Conversol is the 3rd generation of off grid inverters with parallel operation, built in MPPT solar battery charger and now even with Android monitoring/Bluetooth/USB.
Technically, the most important featured as opposed to the Converol 5K48-M is the "Zero Transfer Time " between line and inverter mode. The speedy transfer is crucial in applications like servers, ATM machines, medical equipment and security systems. The continuous supply of electricity without interruption is paramount.
The communication cards with special cables are pre-installed on the inverter to allow easy installation of the 3 inverters in single phase or three phase arrangement.
If you are planning to use an external generator the power rating of it should be 1.5 time larger than the rating of the inverter.
Special Feautures at a glance.
- Max 80Amp MPPT solar charger per inverter
- Max 240Ampp MPPT combined with 3 inverters
- Max PV input voltage 145V in open circuit
- Battery charging voltage up to 64V
- Pure sinusoidal output with high frequency switching
- Works off grid or with a grid
- Auxiliary generator starter dry contact
- Grid charging up to 60Amps
Download the new manual of our Conversol V5
Download product documents:
Conversol V5 Super Specification Sheet
Notice: The following data sheet refers to the specification for one inverter.
| Conversol V5 5kVA Off Grid - Inverter Specification | ||
| MODEL |
Conversol V5 5kVA Off Grid |
|
| Rated Power |
5000VA/5000W |
|
|
INPUT |
||
| Voltage | 230 VAC ± 5% | |
| Selectable Voltage Range | 110-280 VAC | |
| Frequency Range | 50 Hz/60 Hz (Auto sensing) | |
|
OUTPUT |
||
| AC Voltage Regulation (Batt. Mode) | 230VAC ± 5% | |
| Surge Power | 10000VA for 5 sec | |
| Efficiency (Peak) | 93% Line mode, 90% Battery mode | |
| Transfer Time | 0 ms | |
| Waveform | Pure sine wave | |
|
BATTERY |
||
| Battery Voltage |
48 VDC |
|
| Floating Charge Voltage |
54 VDC (up to 64VDC) |
|
| Overcharge Protection |
66 VDC |
|
|
SOLAR CHARGER & AC CHARGER |
||
| Maximum PV Array Power |
4000 W |
|
| MPPT Range @ Operating Voltage |
60-115 V |
|
| Maximum PV Array Open Circuit Voltage |
145 VDC |
|
| Maximum Solar Charge Current | 80 A | |
| Maximum AC Charge Current | 60 A | |
| Maximum Charge Current | 140A | |
| Maximum Efficiency | 98% | |
| Standby Power Consumption | 2W | |
|
PHYSICAL |
||
| Dimension, D X W X H (mm) | 140 x 300 x 512 | |
| Net Weight (kgs) | 12.2 | |
|
OPERATING ENVIRONMENT |
||
| Humidity | 5% to 95% Relative Humidity(Non-condensing) | |
| Operating Temperature | 0℃ to 55℃ | |
| Storage Temperature | -15℃ to 60℃ | |
* There are charging current selection only available for 230VAC system.
Product specifications are subject to change without further notice