Conversol 5kW 120VAC Inverter with MPPT Charger | Off Grid
A combi solar inverter/charger, available in 5kVA that can be configured for off-grid autonomous single and three phase systems. New version with battery equalizer mode.
Off Grid Inverter with MPPT Charger. 230V to 110V Pure Sinewave
The Conversol-US is engineered to serve off grid power supply to special areas around the world, like U.S.A, Canada and anywhere else where a split phase supply is required 110V/120V and 60Hz. The inverter produces 5kW at unity power factor with expansion feature with up to 9 unit in parallel. The transformer will also handle unbalanced loads by leaving the neutral wire unused. The output is split in two phase L1 to Neutral and L2 to Neutra, the detailed configuration are listed in the manual below.
Extend the life of your batteries with EQUALIZATION
Equalization function is used for refreshing the capacity of the battery. It reverses the build up of negative chemical effects like stratification, a condition where acid concentration is greateer at the bottom of battery than at the top. Equalization also helps to remove sulfate crystals that might have built up on the plates. If left unchecked, this condition called sulfation, will reduce the overall capacity (Ah) of the battery. It is recommended to equalize the batteries periodically (at least once per year).
Product Unique Selling Points
- Pure sine wave inverter
- Built-in MPPT solar charge controller
- Selectable input voltage range for home appliances and personal computers
- Selectable charging current based on applications
- Configurable AC/Solar input priority via LCD setting
- Compatible to mains voltage or generator power
- Auto restart while AC is recovering
- Overload and short circuit protection
- Smart battery charger design for optimized battery performance
- Cold start function
- Parallel operation with up to 9 units only available for Conversol 5KVA
Download the new manual of our Conversol 5kVA
CONVERSOL Axpert MKS-MKS+ 1-5KVA manual 2017
Solar Off-Grid & Hybrid Catalogue
Conversol 5KVA Inverter Specification | ||
MODEL |
Conversol 5K-48 |
|
Rated Power |
5000VA/5000W |
|
INPUT | ||
Voltage | 230 VAC | |
Selectable Voltage Range | 65-140 VAC or 90-280 VAC (For Home Appliances) | |
Frequency Range | 50 Hz/60 Hz (Auto sensing) | |
OUTPUT | ||
AC Voltage Regulation (Batt. Mode) | 110/120 VAC ± 5% (User selectable) or 230VAC ± 5% | |
Surge Power | 10000VA | |
Efficiency (Peak) | 90% - 93% | |
Transfer Time | 10 ms (For Personal Computers) 20 ms (For Home Appliances) |
|
Waveform | Pure sine wave | |
BATTERY | ||
Battery Voltage |
48 VDC |
|
Floating Charge Voltage |
54 VDC |
|
Overcharge Protection |
60 VDC |
|
SOLAR CHARGER & AC CHARGER | ||
Maximum PV Array Power |
4000 W |
|
MPPT Range @ Operating Voltage |
60 VDC ~115 VDC |
|
Maximum PV Array Open Circuit Voltage |
145 VDC |
|
Maximum Solar Charge Current | 80 A | |
Maximum AC Charge Current | 60 A | |
Maximum Charge Current | 140A | |
Maximum Efficiency | 98% | |
Standby Power Consumption | 2W | |
PHYSICAL | ||
Dimension, D X W X H (mm) | 140 x 295 x 540 | |
Net Weight (kgs) | 13.5 | |
OPERATING ENVIRONMENT | ||
Humidity | 5% to 95% Relative Humidity(Non-condensing) | |
Operating Temperature | 0℃ to 55℃ | |
Storage Temperature | -15℃ to 60℃ |
* There are charging current selection only available for 230VAC system.
Product specifications are subject to change without further notice