{"product_id":"ve-direct-cable-3m-right-angle","title":"Victron VE.Direct Cable 3m (one side Right Angle conn) - ASS030531230","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVE.Direct Cable 3m (One Side Right Angle Connector)\u003c\/h1\u003e\n\n\u003cp\u003eThe VE.Direct Cable with a right angle connector on one side is a 3-metre data cable for connecting Victron Energy devices that use the VE.Direct communication port. It is designed for installations where a straight connector would create an awkward bend or put strain on the port, making it a practical choice for panel-mounted or recessed equipment.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-metre cable length provides flexibility in routing between devices and monitoring equipment.\u003c\/li\u003e\n  \u003cli\u003eOne right angle connector reduces mechanical stress on the VE.Direct port in tight or recessed installations.\u003c\/li\u003e\n  \u003cli\u003eCompatible with all Victron devices featuring a VE.Direct port, including BMV battery monitors, SmartSolar MPPT controllers, and Phoenix inverters.\u003c\/li\u003e\n  \u003cli\u003eCarries serial communication data between VE.Direct-equipped devices and interfaces such as the Color Control GX, GlobalLink 520, or a PC via USB adaptor.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.105 kg, with a low-profile right angle connector suited to enclosure or cabinet installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eVE.Direct is Victron's proprietary serial communication protocol used across a wide range of their product line. This cable carries data between a VE.Direct-equipped device and a GX device, a VE.Direct to USB interface, a VE.Direct Bluetooth Smart dongle, or similar accessories. It does not carry power to the connected devices; it is a data-only cable.\u003c\/p\u003e\n\n\u003cp\u003eThe right angle connector on one end is particularly useful where the VE.Direct port faces a wall, panel surface, or enclosure side, and a straight plug would either not fit or would apply lateral force to the connector over time. The straight connector on the opposite end connects to the monitoring or interface device in the normal orientation. At 3 metres, the cable gives sufficient reach for most cabinet and wall-mounted system layouts without excess slack.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ASS030531230\u003c\/li\u003e\n  \u003cli\u003eCable length: 3 metres\u003c\/li\u003e\n  \u003cli\u003eConnector type: VE.Direct (one straight, one right angle)\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.105 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076019688\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConnecting a SmartSolar MPPT charge controller to a Cerbo GX or Venus GX in a wall-mounted enclosure.\u003c\/li\u003e\n  \u003cli\u003eLinking a BMV-700 or BMV-712 battery monitor to a Color Control GX where the port orientation requires a right angle connector.\u003c\/li\u003e\n  \u003cli\u003eConnecting a Phoenix inverter to a VE.Direct to USB interface for PC-based monitoring.\u003c\/li\u003e\n  \u003cli\u003eAny VE.Direct installation where cable routing runs parallel to the device face and a straight connector would create a sharp bend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x VE.Direct Cable, 3m, with one right angle connector and one straight connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure the VE.Direct ports on both devices are unpowered or in a safe state before connecting. The VE.Direct connector is keyed and should seat firmly without force. Do not use this cable for power delivery. For system commissioning involving grid-tied inverters or high-voltage battery systems, installation should be carried out by a qualified electrician or MCS-accredited installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59863727800654,"sku":"ASS030531230","price":10.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ASS030531230_-_VE.Direct_Cable_3m_one_side_Right_Angle_conn.webp?v=1781183797","url":"https:\/\/voltaconsolar.com\/products\/ve-direct-cable-3m-right-angle","provider":"VoltaconSolar","version":"1.0","type":"link"}