{"product_id":"victron-12v-110ah-agm-deep-cycle-battery-m8","title":"Victron 12V\/110Ah AGM Deep Cycle Batt. (M8) - BAT412101085","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy 12V 110Ah AGM Deep Cycle Battery (M8 Terminals)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy 12V 110Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery designed for cyclic applications in solar, off-grid and marine systems. With M8 threaded insert terminals, it is suited to professional installations where secure, bolt-on connections are required. At 30kg, it is a substantial battery intended for fixed installations rather than portable use.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e12V nominal voltage with 110Ah capacity, suitable for a wide range of off-grid and backup power applications.\u003c\/li\u003e\n  \u003cli\u003eAGM (Absorbent Glass Mat) construction: sealed, valve-regulated, and maintenance-free with no requirement to top up electrolyte.\u003c\/li\u003e\n  \u003cli\u003eM8 threaded insert terminals provide a secure, vibration-resistant bolted connection, preferred in professional and marine installations.\u003c\/li\u003e\n  \u003cli\u003eDeep cycle design rated for repeated charge and discharge cycles, unlike standard standby or starter batteries.\u003c\/li\u003e\n  \u003cli\u003eVictron Energy manufacture, with consistent quality control and broad compatibility with Victron charge controllers, inverter\/chargers and battery monitors.\u003c\/li\u003e\n  \u003cli\u003eSealed construction means no acid spillage risk and no requirement for a dedicated ventilated battery room, though adequate ventilation is still recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eAGM deep cycle batteries use a glass mat separator to hold the electrolyte in place, making them spill-proof and suitable for installation in orientations other than strictly upright. The sealed valve-regulated design means hydrogen gas emission is minimal under normal operating conditions, though some ventilation is still advisable in enclosed spaces. This distinguishes them from flooded lead-acid batteries, which require regular water top-ups and more stringent ventilation.\u003c\/p\u003e\n\n\u003cp\u003eThe 110Ah capacity at 12V gives approximately 1.32kWh of stored energy. In practice, for deep cycle use, a discharge depth of 50% is commonly recommended to preserve cycle life, giving around 660Wh of usable energy per cycle. This battery is well matched to Victron MPPT charge controllers and MultiPlus or Phoenix inverter\/chargers, which can be configured with the correct AGM charge profile via VictronConnect or Venus OS.\u003c\/p\u003e\n\n\u003cp\u003eThe M8 threaded insert terminals are a practical advantage over standard post terminals in fixed installations. They accept M8 bolts directly, allowing the use of ring-terminal cables without relying on clamp-style connectors. This results in a lower-resistance, more reliable connection, particularly important in high-current applications such as inverter loads.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: BAT412101085\u003c\/li\u003e\n  \u003cli\u003eNominal Voltage: 12V\u003c\/li\u003e\n  \u003cli\u003eCapacity: 110Ah\u003c\/li\u003e\n  \u003cli\u003eBattery Type: AGM Deep Cycle, Sealed VRLA\u003c\/li\u003e\n  \u003cli\u003eTerminal Type: M8 threaded insert\u003c\/li\u003e\n  \u003cli\u003eWeight: 30kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076036975\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSolar off-grid systems with MPPT charge controllers and standalone inverters.\u003c\/li\u003e\n  \u003cli\u003eNarrowboat, canal boat and marine house battery banks.\u003c\/li\u003e\n  \u003cli\u003eMotorhome and campervan leisure battery installations.\u003c\/li\u003e\n  \u003cli\u003eUPS and backup power systems for telecoms or critical equipment.\u003c\/li\u003e\n  \u003cli\u003eMulti-battery banks wired in series or parallel for higher voltage or capacity systems.\u003c\/li\u003e\n  \u003cli\u003eRemote monitoring stations, agricultural equipment and other fixed off-grid installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Victron Energy 12V 110Ah AGM Deep Cycle Battery (M8 terminals)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis battery weighs 30kg and should be handled by two people or with appropriate lifting equipment. Install in a stable, fixed location away from heat sources and direct sunlight. Although sealed AGM batteries produce minimal gas under normal conditions, install in a ventilated space and never in a fully airtight enclosure. Use correctly rated cables with M8 ring terminals and torque fasteners to the manufacturer's specification. Ensure your charger or inverter\/charger is set to an AGM-compatible charge profile. For integration into solar PV or mains-connected systems, installation by a qualified electrician is recommended. In the UK, any work on grid-connected systems must comply with relevant wiring regulations and DNO requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59856046358862,"sku":"BAT412101085","price":217.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BAT412101085_-_12V-110Ah_AGM_Deep_Cycle_Batt._M8.webp?v=1781101875","url":"https:\/\/voltaconsolar.com\/products\/victron-12v-110ah-agm-deep-cycle-battery-m8","provider":"VoltaconSolar","version":"1.0","type":"link"}