{"product_id":"victron-blue-smart-ip65-charger-12v-25a-cee-7-16","title":"Victron Blue Smart IP65 Charger 12\/25(1) 230V CEE 7\/16 - BPC122531034","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Blue Smart IP65 Charger 12V 25A (1 Output) 230V CEE 7\/16\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Blue Smart IP65 12\/25 is a single-output 25-amp battery charger for 12V systems, supplied with a CEE 7\/16 (Europlug) mains connector. It is built for professional and trade use where a reliable, weather-resistant charger is needed for vehicles, marine applications, or off-grid battery maintenance. The IP65 rating means it can be mounted in exposed locations without additional enclosure protection.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated enclosure: dust-tight and protected against low-pressure water jets, suitable for installation in engine bays, lockers and outdoor cabinets.\u003c\/li\u003e\n  \u003cli\u003e25A charge current on a single output, suitable for 12V lead-acid and lithium (LiFePO4) battery banks.\u003c\/li\u003e\n  \u003cli\u003eBluetooth built-in: monitor and adjust charge settings via the VictronConnect app on iOS or Android without additional hardware.\u003c\/li\u003e\n  \u003cli\u003eAdaptive multi-stage charging algorithm with automatic battery type detection and a storage\/maintenance mode to keep batteries in condition during long periods of inactivity.\u003c\/li\u003e\n  \u003cli\u003eSupplied with a CEE 7\/16 (Europlug) 230V AC input connector, compatible with standard European mains sockets.\u003c\/li\u003e\n  \u003cli\u003eDC output via a direct-connect cable with ring terminals, allowing permanent or semi-permanent installation.\u003c\/li\u003e\n  \u003cli\u003eWide input voltage tolerance handles generator and shore power supplies where voltage may fluctuate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Blue Smart IP65 range uses a fully sealed, splash-proof housing that makes it practical to mount close to the battery bank rather than running long DC cables from a remote charger. At 25A output on a 12V system, it can deliver up to 300W of charge power, making it appropriate for battery banks up to around 300Ah where a reasonable charge rate is required, or larger banks where overnight charging is acceptable.\u003c\/p\u003e\n\n\u003cp\u003eBluetooth connectivity is built directly into the unit. Using the VictronConnect app, an installer or end user can view real-time charge status, adjust the charge algorithm, set battery capacity, and review historical data. No additional interface hardware or dongles are required. This also means the charger can be configured for different battery chemistries, including flooded, AGM, gel and LiFePO4, without needing to change any physical settings.\u003c\/p\u003e\n\n\u003cp\u003eThe adaptive charging algorithm monitors battery response during the bulk phase and adjusts the absorption time accordingly. This avoids overcharging batteries that are only partially discharged while still fully charging deeply discharged banks. A storage mode activates automatically after a period of full charge, applying a periodic recondition cycle to prevent sulphation in lead-acid batteries.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: BPC122531034\u003c\/li\u003e\n  \u003cli\u003eInput voltage: 230V AC, CEE 7\/16 (Europlug) connector\u003c\/li\u003e\n  \u003cli\u003eOutput voltage: 12V DC\u003c\/li\u003e\n  \u003cli\u003eCharge current: 25A (single output)\u003c\/li\u003e\n  \u003cli\u003eIP rating: IP65\u003c\/li\u003e\n  \u003cli\u003eWeight: 1.91 kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076048381\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePermanent installation in motorhomes, campervans and caravans for mains-connected battery charging.\u003c\/li\u003e\n  \u003cli\u003eMarine use: charging 12V service or starter battery banks from shore power.\u003c\/li\u003e\n  \u003cli\u003eOff-grid cabins and outbuildings where a generator or grid connection is available for periodic charging.\u003c\/li\u003e\n  \u003cli\u003eCommercial vehicle fleets requiring a fixed, weather-resistant charger mounted in the vehicle.\u003c\/li\u003e\n  \u003cli\u003eBattery maintenance for seasonal equipment such as boats, agricultural machinery and backup power systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVictron Blue Smart IP65 12\/25 charger unit\u003c\/li\u003e\n  \u003cli\u003eCEE 7\/16 (Europlug) 230V AC mains cable\u003c\/li\u003e\n  \u003cli\u003eDC output cable with ring terminals\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis charger is designed for permanent or semi-permanent installation and connects directly to the battery via ring terminals. Ensure the DC cabling is correctly sized and fused close to the battery in accordance with the battery manufacturer's recommendations and applicable wiring standards. The CEE 7\/16 plug is a non-earthed Europlug; confirm that the mains supply and socket are appropriate for the installation location. For installations in marine or mobile applications, a qualified auto-electrician or marine electrician should carry out the work. The charger supports LiFePO4 batteries but verify compatibility with the specific battery management system before connecting.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59866748551502,"sku":"BPC122531034","price":126.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_BPC122531034_-_Blue_Smart_IP65_Charger_12-25_1_230V_CEE_7-16.webp?v=1781200266","url":"https:\/\/voltaconsolar.com\/products\/victron-blue-smart-ip65-charger-12v-25a-cee-7-16","provider":"VoltaconSolar","version":"1.0","type":"link"}