{"product_id":"victron-bluesolar-pwm-pro-temperature-sensor","title":"Victron Temp. sensor for BlueSolar PWM-Pro Charge Controller - SCC940100100","description":"\u003ch1 style=\"color: #f87c24;\"\u003eTemperature Sensor for Victron BlueSolar PWM-Pro Charge Controller\u003c\/h1\u003e\n\n\u003cp\u003eThis is the dedicated temperature sensor for the Victron BlueSolar PWM-Pro charge controller range. It allows the controller to apply temperature-compensated charging, adjusting charge voltages automatically based on battery temperature to prevent overcharging in warm conditions and undercharging in cold ones.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for use with Victron BlueSolar PWM-Pro charge controllers.\u003c\/li\u003e\n  \u003cli\u003eEnables automatic temperature-compensated charging, protecting battery health across varying ambient conditions.\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.06 kg, with a compact form factor suited to tight battery enclosures.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connection to the PWM-Pro controller's dedicated sensor port.\u003c\/li\u003e\n  \u003cli\u003eGenuine Victron Energy accessory, ensuring full compatibility and reliable performance with supported controllers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eBattery charging voltage must be adjusted according to temperature. Without compensation, a battery charged at a fixed voltage will be overcharged in summer and undercharged in winter, both of which shorten battery life. The BlueSolar PWM-Pro supports temperature compensation natively, but only when this sensor is connected.\u003c\/p\u003e\n\n\u003cp\u003eThe sensor mounts directly on or near the battery and feeds real-time temperature data to the charge controller. The PWM-Pro then shifts the charge voltage up or down from the nominal setpoint, typically by a fixed number of millivolts per degree Celsius per cell. This is particularly important in installations where the battery bank is located in an uninsulated space such as a vehicle, boat, or outdoor cabinet, where temperatures can swing significantly between seasons.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: SCC940100100\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076025658\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.06 kg\u003c\/li\u003e\n  \u003cli\u003eCompatible with: Victron BlueSolar PWM-Pro charge controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-grid solar systems using a Victron BlueSolar PWM-Pro controller where battery temperature varies seasonally or daily.\u003c\/li\u003e\n  \u003cli\u003eMarine and narrowboat installations with batteries in unheated compartments.\u003c\/li\u003e\n  \u003cli\u003eMotorhome, campervan and vehicle solar setups subject to wide temperature ranges.\u003c\/li\u003e\n  \u003cli\u003eRemote cabins or outdoor enclosures where ambient temperature affects battery performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Temperature sensor for Victron BlueSolar PWM-Pro charge controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThe sensor should be attached directly to the battery casing to give the most accurate temperature reading. Ensure the sensor connector is fully seated in the correct port on the PWM-Pro controller before commissioning. This accessory is only compatible with the BlueSolar PWM-Pro range and should not be used with other Victron controller models. Installation as part of a wider solar system should be carried out by a qualified electrician or competent person familiar with 12V and 24V DC systems.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59866759528782,"sku":"SCC940100100","price":8.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SCC940100100_-_Temp._sensor_for_BlueSolar_PWM-Pro_Charge_Controller.webp?v=1781200520","url":"https:\/\/voltaconsolar.com\/products\/victron-bluesolar-pwm-pro-temperature-sensor","provider":"VoltaconSolar","version":"1.0","type":"link"}