{"product_id":"victron-orion-24-12-80-dc-dc-converter-non-isolated-ip20","title":"Victron Orion 24\/12-80 DC-DC converter IP20 \/ Binding posts - ORI241280030","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Orion 24\/12-80 DC-DC Converter IP20 Non-Isolated\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Orion 24\/12-80 is a non-isolated DC-DC converter that steps down a 24V DC input to a regulated 12V DC output at up to 80A. It is designed for professional use in vehicles, marine installations, and off-grid systems where two separate DC voltage rails need to operate from a single battery bank or power source.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-isolated 24V to 12V DC-DC conversion with an 80A continuous output current rating.\u003c\/li\u003e\n  \u003cli\u003eIP20 protection rating, suitable for installation in enclosed, protected environments such as cabinets and panels.\u003c\/li\u003e\n  \u003cli\u003eBinding post terminals for straightforward cable connection without specialist tooling.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight at 0.95kg, making it practical for space-constrained installations.\u003c\/li\u003e\n  \u003cli\u003eDesigned for use in dual-voltage DC systems, allowing 12V loads to be powered directly from a 24V supply.\u003c\/li\u003e\n  \u003cli\u003eVictron Orion range is widely used across marine, vehicle, and off-grid applications where reliable voltage conversion is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Orion 24\/12-80 converts a 24V DC source down to a stable 12V DC output, delivering up to 80A. This makes it suitable for powering 12V equipment, accessories, or secondary battery systems from a 24V primary supply. The non-isolated design means the input and output share a common ground, which is standard practice in many vehicle and marine dual-voltage installations.\u003c\/p\u003e\n\n\u003cp\u003eThe IP20 enclosure rating means the unit is protected against solid objects greater than 12mm but is not water or dust resistant. Installation must be in a dry, enclosed location such as a switchboard cabinet, battery compartment, or electrical panel. The binding post terminals allow for quick and secure cable connections, which is useful during commissioning or in installations where cables may need to be reconfigured.\u003c\/p\u003e\n\n\u003cp\u003eAt 80A output, this converter can supply up to approximately 960W of 12V power continuously. This is sufficient for running a substantial 12V load bank alongside a 24V primary system, without the need for a separate 12V battery or charging circuit.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSKU: ORI241280030\u003c\/li\u003e\n  \u003cli\u003eInput voltage: 24V DC (nominal)\u003c\/li\u003e\n  \u003cli\u003eOutput voltage: 12V DC (nominal)\u003c\/li\u003e\n  \u003cli\u003eOutput current: 80A\u003c\/li\u003e\n  \u003cli\u003eType: Non-isolated DC-DC converter\u003c\/li\u003e\n  \u003cli\u003eProtection rating: IP20\u003c\/li\u003e\n  \u003cli\u003eTerminal type: Binding posts\u003c\/li\u003e\n  \u003cli\u003eWeight: 0.95kg\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076070849\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePowering 12V accessories and loads from a 24V vehicle or marine electrical system.\u003c\/li\u003e\n  \u003cli\u003eDual-voltage off-grid systems where both 24V and 12V distribution rails are required.\u003c\/li\u003e\n  \u003cli\u003eCommercial vehicle conversions with mixed 24V and 12V equipment.\u003c\/li\u003e\n  \u003cli\u003eMarine installations requiring a stable 12V supply from a 24V battery bank.\u003c\/li\u003e\n  \u003cli\u003eIndustrial panel installations with protected enclosures where IP20 is acceptable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Victron Orion 24\/12-80 DC-DC converter with binding post terminals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis unit must be installed in a dry, protected enclosure given its IP20 rating. It is not suitable for exposure to moisture, condensation, or dust. The non-isolated design means input and output grounds are common, which must be accounted for in the system wiring design. Installation should be carried out by a qualified electrician or experienced system integrator familiar with DC power systems. Ensure appropriate fusing is fitted on both the input and output sides in accordance with the cable ratings and system design requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":59866756055374,"sku":"ORI241280030","price":91.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_ORI241280030_-_Orion_24-12-80_DC-DC_converter_IP20_-_Binding_posts.webp?v=1781200413","url":"https:\/\/voltaconsolar.com\/products\/victron-orion-24-12-80-dc-dc-converter-non-isolated-ip20","provider":"VoltaconSolar","version":"1.0","type":"link"}