{"product_id":"victron-shunt-2000a-50mv-3xm10","title":"Victron Shunt 2000A\/50mV-0,5 \/ 3xM10 - SHU202050200","description":"\u003ch1 style=\"color: #f87c24;\"\u003eVictron Energy Shunt 2000A\/50mV (3xM10)\u003c\/h1\u003e\n\n\u003cp\u003eThe Victron Energy 2000A\/50mV shunt is a high-current DC measuring shunt designed for use in large battery systems, off-grid installations and commercial energy storage applications. It allows accurate current measurement by producing a calibrated 50mV signal at full rated current, which can be fed into a battery monitor or energy management system. The three M10 connection points accommodate heavy-gauge cabling suited to high-amperage DC circuits.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRated at 2000A continuous DC current with a 50mV full-scale output signal, giving a shunt resistance of 0.025 milliohms.\u003c\/li\u003e\n  \u003cli\u003eThree M10 bolt terminals provide secure, low-resistance connections for large cross-section cables.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Victron BMV battery monitors and other shunt-based monitoring equipment that accept a 50mV input.\u003c\/li\u003e\n  \u003cli\u003eSolid construction with a weight of 2.15kg, reflecting the heavy-duty busbar and resistive element required at this current rating.\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in battery banks, DC distribution boards and large inverter or motor drive installations where accurate current measurement is essential.\u003c\/li\u003e\n  \u003cli\u003eSKU: SHU202050200 | GTIN: 8719076026204\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eA shunt works by inserting a known, very low resistance into the DC circuit. The voltage drop across that resistance is directly proportional to the current flowing through it. At 2000A, this shunt produces exactly 50mV, which is the standard signal level accepted by most battery monitors and data loggers. The measurement is passive and does not require a separate power supply, making it straightforward to integrate into existing monitoring wiring.\u003c\/p\u003e\n\n\u003cp\u003eAt 2000A, cable sizing, terminal torque and busbar layout all become critical. The three M10 terminals allow the load and source cables to be distributed across multiple connection points, reducing localised heating and mechanical stress on any single terminal. This is particularly relevant in systems where multiple battery strings or inverters share a common measurement point. The shunt should be positioned as close to the battery negative terminal as practical to capture all current flows in the circuit.\u003c\/p\u003e\n\n\u003cp\u003eThe 50mV output is a widely adopted standard. If you are using a Victron BMV-700, BMV-712 or SmartShunt, this external shunt allows you to extend measurement capability beyond the built-in 500A shunt supplied with those monitors, covering large-scale systems that would otherwise exceed the internal shunt's rating.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRated current: 2000A DC\u003c\/li\u003e\n  \u003cli\u003eFull-scale voltage output: 50mV\u003c\/li\u003e\n  \u003cli\u003eTerminal size: 3x M10\u003c\/li\u003e\n  \u003cli\u003eWeight: 2.15kg\u003c\/li\u003e\n  \u003cli\u003eSKU: SHU202050200\u003c\/li\u003e\n  \u003cli\u003eGTIN: 8719076026204\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge off-grid battery banks with multiple strings in parallel requiring a single high-current measurement point.\u003c\/li\u003e\n  \u003cli\u003eCommercial and industrial energy storage systems where total DC current exceeds the capacity of a standard integrated shunt.\u003c\/li\u003e\n  \u003cli\u003eMarine and vehicle installations with high-capacity lithium or lead-acid battery systems.\u003c\/li\u003e\n  \u003cli\u003eDC distribution boards in large solar PV systems feeding multiple inverters or loads.\u003c\/li\u003e\n  \u003cli\u003eRetrofit current monitoring on existing installations where no shunt is currently fitted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eWhat Is Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Victron Energy 2000A\/50mV shunt with 3xM10 terminals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color: #f87c24;\"\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eThis shunt carries the full DC current of the system and must be installed by a qualified electrician or experienced DC systems installer. At 2000A, incorrect cable sizing, inadequate terminal torque or poor busbar connections present a serious risk of overheating or fire. The shunt should be mounted on a non-conductive surface or properly insulated busbar assembly. Ensure all connections are made with appropriately rated lugs and that the 50mV sense wiring is routed separately from power cables to avoid interference. For systems connected to the grid, all relevant UK wiring regulations (BS 7671) apply.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":60190998495566,"sku":"SHU202050200","price":94.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/3698\/8238\/files\/VoltaconSolar_-_SHU202050200_-_Shunt_2000A-50mV-0_5_-_3xM10.webp?v=1784715817","url":"https:\/\/voltaconsolar.com\/products\/victron-shunt-2000a-50mv-3xm10","provider":"VoltaconSolar","version":"1.0","type":"link"}