Clearance / Ex-Display Units - Click here 
NOTICE: Pylontech New Stock with Lower Price Expected End of May 2023
  • Global Delivery Available
  • Solar Experts Since 2002
  • 5 Year Extended Warranty

Over Voltage Protection SPD PV 500V

0% of 100
The inverters and solar panels must be protected against surge voltages. The PV-Guard-500 is rated to 40kA and 150V, ideal for low voltage solar off-grid inverters.
£58.00 Incl VAT.
Accepted Payment Methods
Protection & Monitoring

PV-Guard500. Surge Protection 500V. DC Input Solar Inverter

The device is compliant with PV standard EN50539-11. The din rail mounted SPD is widely used in solar combiner boxes to protect the solar panels and inverters from surges in voltage and lightning. The protection method is high energy Varistor. 

The risk of over-voltage is direct (lightning impact) or indirect effect (over-voltage on solar panels, inverter and other connections. 

 DC network: surge protectors are necessary, sometimes mandatory, on the continuous network in between the modules and the PV inverter

Technical Parameters

Poles  3 Poles , Positive Vdc, Negative Vdc and Earth
Open circuit voltage                500V.  Max Operating: 530V
Nominal DIscharge Current:                                    20kA
Maximum Discharge Current                                   40kA
Voltage Protection Level Up                                  <3.8kV
Response Time                                  <25ns
 Operating State/Fault Indication                               Green / Red
 Standards  IEC-61643-1 & 61643-11 & EN50539-11
 Dimensions  84mm x 53.5mm
 Wire Cables  Flexible 4-16mm2


Write a review:
Write a review: