Plug and play directly to the mains 600w inverter

More Views

Soladin 600 Grid Tie Inverter (UK Version)

Be the first to review this product

Availability: In stock

£255.00

Solar technology enables us to use renewable power sources such as the sun to an increasing extent. With the development of the Soladin 600, Mastervolt has made it possible for smaller solar installations, consisting of just a few panels, to contribute to a durable energy provision.

Details

The sun as power station

Solar technology enables us to use renewable power sources such as the sun to an increasing extent. With the development of the Soladin 600, Mastervolt has made it possible for smaller solar installations, consisting of just a few panels, to contribute to a durable energy provision.

 

Working principle of the Soladin 600

The most important functionality of the Soladin is converting direct current, generated by the solar panels, into a standard 230 V/50 Hz electric power. The Soladin uses the electricity grid as an energy reservoir to which generated energy is sold back. In case the electricity provision is cut off, the Soladin will automatically shut down.

 

Plug & play

The Soladin 600 converter is very compact and equipped with easily accessible 230 V and DC connections. MultiContact connections have been included for the positive and negative connection of the PV array. The plug can be connected to a socket connection and makes the system ready to use. A clear LED indication gives information about the energy produced, the status of the system, and the Soladin converter.

 

Dynamic MPP tracker

Solar panels have a certain voltage at which they supply maximum energy: the so-called ‘maximum power point’ (MPP). This point varies in any make and kind of panel, and is determined by a combination of voltage, current, irradiation and temperature. The Soladin 600 is equipped with a dynamic MPP tracker, which makes it possible to reach > 99% MPP output under virtually any circumstances. The Soladin 600 therefore does not have any restrictions with regards to connecting any kind of solar panel (silicum, amorf, etc.) and always provides optimum performance of your solar system.

 

Entry range

The Soladin 600 has a wide working area and this makes it possible to connect almost all systems up to 700 Wp. With a max. voltage of 155 V DC, configurations of 36, 54 as well as 72 cells can be connected to it. The current range from 0 to 8 A making the Soladin 600 suitable for the latest high power panels.

  • Products developed for countries where an ENS circuit is not required. 
  • Fitted with QNS anti-islanding as standard.

Product code: 130000660 

Technical Specifications

General specifications 

 
Operating temperature

0 °C to 40 °C

Enclosureplastic (ABS)
Safety classclass II
Dimensions, hxwxd

365 x 143 x 76 mm

Weight

2 kg

Protection degreeIP20
Product warranty5 years
 
Technical specifications 
 
Relative humiditymax. 85%; non condensing
 
Grid output (AC) specifications 
 
Grid voltage230 V (184-265 V, programmable)
Max. output current2,25 A
Frequency49,8-50,2 Hz
Power factor0,99
Standby power< 0,05 W
EU efficiency91 %
Max. efficiency93 %
AC connectionEuro socket
Fuse3.15 A slow
 
Regulations & directives 
 
CE conformityyes
Nat. grid requirementsEMC89/336/EEG; EN50081-1; EN61000-3-2; EN50082-2; LV73/23/EEC; EN60950; EN62109-1
 
Communication & monitoring 
 
Displaytwo LED’s: yellow and red; correct working = yellow (speed of flashing is in relation to the power generated); malfunction = red (6 different flashing codes)
 
Safety regulations 
 
Island protectionmonitoring of voltage and frequency frame, disconnects within 100 ms
Temperature protectionreducing the power in case of a higher temperature of the converter; will disconnect > 80 ºC
Protection of peak capacityautomatic control, dependent on the temperature of the converter, by raising the Vmpp; it is impossible to damage the converter with too much power
DC polarity protectionDC connection is protected (MC connectors can be damaged)
 
Solar input (DC) specifications 
 
Max. input power600 W
PV power range160-700 Wp
Nom. input power535 W
Start-up power1 W
MPP voltage range at nom. power45-125 V
Max. voltage155 V
Number of inputs1x MultiContact 4mm²
Number of MPP trackersdynamic MPP tracker
Nom. input current8 A

Customer Reviews

Write Your Own Review

You're reviewing: Soladin 600 Grid Tie Inverter (UK Version)

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Price
Value
Quality