Global Delivery Available
Solar Experts Since 2002
5 Year Extended WarrantyVictron MultiPlus-II 48V 5kVA
The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option that extends the PowerControl and PowerAssist function to 50A resp. 100A. Suitable existing solar PV installation with feed-in tariff and grid inverters. In Stock
MultiPlus-II 48/5000/70-50. Inverter with AC-charger
A MultiPlus, plus ESS (Energy Storage System) functionality. It combines the functions of the Multigrid and the Multiplus
PMP482505010
The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.
PowerControl and PowerAssist - Boosting the capacity of the grid or a generator
A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).
PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.
Uninterrupted AC power (UPS function)
In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters.
Download section
MultiPlus-II Data Sheet
MultiPlus-II 48/5000/70-50 |
||
| MODEL |
MultiPlus-II 48/5000/70-50 |
|
| Rated Power |
5000VA/4000W |
|
| INPUT | ||
| Voltage | 187-265 VAC | |
| Selectable Voltage Range | 187-265 VAC | |
| Frequency Range | 45 - 65 Hz | |
| OUTPUT | ||
| AC Voltage Regulation (Batt. Mode) | 230VAC ± 2% | |
| Surge Power | 9000W | |
| Efficiency (Peak) | 96% | |
| Transfer Time | 10 ms (For Personal Computers) 20 ms (For Home Appliances) |
|
| Waveform | Pure sine wave | |
| BATTERY | ||
| Charge voltage 'absorption' |
57.6 VDC |
|
| Charge voltage 'float' |
55.2 VDC |
|
| Storage mode |
52.8 VDC |
|
| SOLAR CHARGER & AC CHARGER | ||
| Maximum PV Array Power |
- |
|
| MPPT Range @ Operating Voltage |
- |
|
| Maximum PV Array Open Circuit Voltage |
- |
|
| Maximum Solar Charge Current | - | |
| Maximum AC Charge Current | - | |
| Maximum Charge Current | - | |
| Maximum Efficiency | - | |
| Self-Consumption | - | |
| PHYSICAL | ||
| Dimension, H x W x D (mm) | 560 x 320 x 141 mm | |
| Net Weight (kgs) | 29kg | |
| OPERATING ENVIRONMENT | ||
| Humidity | 5% to 95% Relative Humidity(Non-condensing) | |
| Operating Temperature | -40℃ to +65℃ | |
| Storage Temperature | -15℃ to 60℃ | |
