Victron Multi RS Solar 48/6000 230V 80-450VDC 4kW MPPT Charger - PMR482602000

Victron Energy RS 48/6000 230V Smart Solar. 80-450VDC | 4kW MPPT Charger

The Inverter RS Smart Solar is a combination of a powerful 48VDC, 6kVA 230VAC inverter and a high voltage, 80-450VDC, 4kW MPPT solar charger. It is used in off-grid solar applications where AC power is required.

The inverter produces a perfect sine wave, able to supply high powered appliances. It is supplied by a bi-directional DC-DC converter, that can either charge the battery when excess solar power is available or convert from the battery when it is needed.

Both parallel PV strings connected to the MC4 plugs can be safely isolated with the large built-in switch on the bottom of the unit.

The inverter is equipped with a display to read out the battery, inverter, and solar charger details. These parameters can also be read out via Bluetooth by the VictronConnect App.

Features

Wide MPPT voltage range

80 – 450VDC, with a 120VDC PV startup voltage.

Lightweight, efficient and quiet

Thanks to high-frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this, it has excellent efficiency, low standby power, and a very quiet operation.

​​​​​​​

Display and Bluetooth

• The display reads battery, inverter and solar charge controller parameters.
• The same parameters can be accessed with a smartphone or other Bluetooth enabled device.
• In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect.

VE.Can and VE.Direct port

For connection to a GX device for system monitoring, data logging, and remote firmware updates.

Built-in PV isolator

Both parallel PV strings connected to the MC4 plugs can be safely isolated with the large built-in switch on the bottom of the unit.

​​​​​​​

I/O Connections

Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron miniBMS