Conversol V7 5kW Off Grid Inverter & MPPT Charger - Lithium Ion Ready
The same features as the Conversol V5 but with a higher MPPT Voltage 120-450V and built-in Wi-Fi communication. It works with lithium-ion batteries (BMS), GEL and lead-acid. Now with solar panel input up to 6000Watt. In Stock. Delivery in 1-2 days
Conversol 5kW V7 High MPPT Voltage Inverter & Charger
This inverter is the evolution of the V5 Conversol with Bluetooth, now with a powerful 100A MPPT charger, zero transfer time and MPPT voltage range that is extended to 120-450VDC. High voltage of solar PV strings is required for installation with long cable runs from the panels to the inverter.
The system is also simplified because there are small number of parallel strings and fewer pairs of cables. This model is cable to work with up to 6000Watt of solar panels using only two symmetrical arrays of photovoltaic panels.
Main features
- Zero (0ms) transfer time to protect mission-critical loads such as servers and ATMs
- High PV input voltage range
- Removable LCD control module with multiple communications
- Selectable high power charging current
- Built-in Wi-Fi for mobile monitoring (App is available)
- Configurable AC/Solar input priority via LCD setting
- Reserved communication port for BMS (RS485 or CAN-BUS)
- Parallel operation up to 9 units (parallel kit not included)
- Max PV Input 6000Watt
The inverter works with parallel strings at high voltage from 120-450Vdc. We added below some recommendation how to connect multiple strings to one MPPT controller:
2x strings of 10 panels 300Watt each. 3kW per MPPT input. The total PV input power is 6kW from 20 panels.
Comparison Conversol V5 Vs V7
Model |
V7 |
MKS III |
Rating |
5KW |
5KW |
MPPT Type |
MPPT |
MPPT |
Maximum PV VOC |
500V |
450V |
Maximum PV Rating |
6000W |
5000W |
Maximum Charging Current |
100A |
100A |
Parallel Feature |
9 units |
9 units |
Remote Panel |
Yes |
N/A |
Battery Independence |
N/A |
Yes |
Inbuilt BMS Port |
Yes |
Optional BMS Box |
Inbuilt Wifi/BlueTooth |
integrated Wifi |
Optional Wifi Box |
LCD Display |
2.5" Mono |
2.5" Mono |
Key Features |
0ms Transfer Time |
|
Conversol V7 5kW | |
MODEL | Conversol V7-5000-48 |
CAPACITY | 5000VA/5000W |
PARALLEL CAPABILITY | Yes, 9 units |
GRID INPUT | |
Voltage | 230 VAC |
Voltage Range | 110-280 VAC |
Frequency Range | 50 Hz/60 Hz (Auto sensing) ± 4Hz |
Power Factor | ≧ 0.98 @ Nominal Voltage (100% Load) |
THDi | ≦ 10% |
LOAD OUTPUT | |
AC Voltage Regulation (Line&Batt. Mode) | 230VAC ± 5% |
Frequency Range (Synchronized Range) | 46~54 Hz or 56~64 Hz |
Frequency Range (Batt. Mode) | 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz |
Harmonic Distortion | ≦3 % THD (Linear Load); ≦ 5 % THD (Non-linear Load) |
Transfer Time (AC Mode to Batt. Mode) | 0ms |
Transfer Time (Inverter to Bypass) | 4 ms (Typical) |
Waveform | Pure sine wave |
EFFICIENCY | |
Line Mode | 94% |
ECO Mode | 98% |
Battery Mode | 92% |
BATTERY | |
Battery Voltage | 40~66 VDC |
Floating Charge Voltage | 54 VDC |
Overcharge Protection | 66 VDC |
SOLAR INPUT | |
Solar Charger type | MPPT |
Maximum PV Array Power | 6000 W |
MPPT Range @ Operating Voltage | 120 ~ 430 VDC |
Maximum PV Array Open Circuit Voltage | 500 VDC |
Maxmum Solar Charge Current | 100A |
Maximum AC Charge Current | 100A |
PHYSICAL | |
Dimension, D X W X H (mm) | 140 x 295 x 468 |
Net Weight (kgs) | 12.0 |
Communication Interface | RS232, USB, DRY CONTACT, WI-FI, RS485 |
OPERATING ENVIRONMENT | |
Humidity | 5% to 95% Relative Humidity(Non-condensing) |
Operating Temperature | -10°C to 50°C |
Storage Temperature | -15°C to 60°C |
* Product specifications are subject to change without further notice |