Description
xTo maximize energy efficiency from solar grids, a high-quality solar inverter is crucial. The Elios Grid Tie Solar Inverter 3600W is a crucial piece in the connection between your solar panels and your home’s power system.
Most solar systems, unless they can store energy, are designed to minimize energy taken from the grid, not replace it. This solar inverter detects the current running to your home. When possible, it stops the current and lets the solar power your home. When the solar power drops off, the system starts to pull from the grid again. This inverter works so smoothly that you won’t even notice the change.
Remember to size your inverter based on the wattage of your solar grid; if these are not matched, efficiency will drop.
G100 EXPORT LIMITATION
- Install more on small grid connections without under sizing the inverter thus maintaining optimum generation.
- Revisit existing solar installations to add more solar.
Voltacon offers an export limitation option integrated into the Elios inverter firmware. With the Energy Meter with Modbus Connection and appropriate CT clamps, this dynamically adjusts PV power production. Allowing you to use more energy for self-consumption when the loads are high while maintaining the export limit when the loads are low.
The current transformer (CT) is included with an inverter
Systems with moderate daytime energy use may have little to no effect on energy generation whilst keeping the DNO's export limits satisfied.
Systems with moderate daytime energy use may have little to no effect on energy generation whilst keeping the DNO's export limits satisfied.
EXPORT LIMITATION BENEFITS
- Highly competitive cost grid limiting device
- Set any limit imposed by the DNO
- Enables larger installations
- Fast response time — follows rapid power changes (<1 sec)
- Fail-safe operation protects the grid
Specifications
x|
MODEL |
PH50-3600M |
|
RATED POWER(W) |
3600 |
|
Maximum recommended DC power(W) |
4100 |
|
Nominal DC operating voltage(V) |
360 |
|
Maximum DC voltage(V) |
550 |
|
Start voltage(V) |
100 |
|
MPPT voltage range(V) |
80~550 |
|
Maximum input current(A) |
11/11 |
|
No.of MPP tracker |
2 |
|
Strings per MPP tracker |
1 |
|
Nominal AC output power(W) |
3600 |
|
Maximum AC output power(VA) |
3600 |
|
Nominal output voltage(V);range(V) |
220/230/240;180-280 |
|
AC grid frequency(Hz);range(Hz) |
50/60;45~55/55-65 |
|
Nominal output current(A) |
15.7 |
|
Maximum output current(A) |
16.4 |
|
Total harmonic distortion i(THDi) |
<3% |
|
Power factor at rated power |
1 |
|
Displacement power factor |
0.8leading ～ 0.8lagging |
|
AC connection |
Single phase |
|
Maximum efficiency |
97.4% |
|
Euro-efficiency |
97.0% |
|
MPPT efficiency |
99.5% |
|
Self-Consumption night(W) |
<1 |
|
DC reverse polarity protection |
Yes |
|
DC switch rating for each MPPT |
Yes(opt.) |
|
Output over current protection |
Yes |
|
Output overvoltage protection-varistor |
Yes |
|
Ground fault monitoring |
Yes |
|
Grid monitoring |
Yes |
|
Integrated all-pole sensitive leakage current |
Yes |
|
Dimension(W/H/D)(mm) |
355*412*153 |
|
Net weight (kg) |
13.5 |
|
DC connection |
H4/MC4 |
|
AC connection |
Connector |
|
Display |
LED |
|
Communication interfaces |
Wi-Fi/USB/GPRS |
|
Ingress protection rating |
IP65 |
|
Humidity |
0~95% RH (No condensing) |
|
Operating temperature range |
-25℃ ~+60℃ With derating above 45℃ |
|
Cooling concept |
Natural |
|
Noise emission(typical)[dB] |
≤25 |
|
Altitude |
<4000m |
|
Topology |
transformerless |
|
Warranty |
Standard 5years/10 years(opt.) |
|
Certificatesand approvals |
CE / IEC62109 / CQC |
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.