Description
xVictron Blue Smart IP65 Charger 24V 13A (1 Output) 230V UK
The Victron Blue Smart IP65 24/13 is a single-output, 13-amp battery charger for 24V battery systems, supplied with a UK BS 1363 plug. It is designed for professional and trade use where a reliable, weather-resistant charger is needed for vehicles, marine applications, or off-grid battery maintenance. The IP65 rating means it can be used in damp or dusty environments without additional enclosure.
Key Features
- IP65-rated enclosure: protected against dust ingress and low-pressure water jets, suitable for outdoor and marine environments.
- Built-in Bluetooth allows full configuration and monitoring via the Victron VictronConnect app on iOS and Android, with no additional hardware required.
- Adaptive 7-stage charging algorithm covers bulk, absorption, float, storage, equalisation and recondition phases to suit a range of battery chemistries.
- Compatible with lead-acid battery types including GEL, AGM, and flooded wet cell, as well as lithium LiFePO4 batteries.
- Supplied with a UK BS 1363 three-pin plug for direct mains connection without rewiring or adaptor.
- Temperature-compensated charging adjusts charge voltage based on ambient temperature to protect battery health.
- Single output rated at 13A on a 24V system, delivering up to approximately 300W of charge power.
Product Overview
The Blue Smart IP65 range uses a fully sealed, dust and splash-proof housing that makes it practical in locations where a standard charger would be unsuitable. The 24V 13A model is well suited to larger 24V battery banks found in commercial vehicles, motorhomes, narrowboats, and off-grid cabins. At 13A, it will charge a 100Ah battery from flat to full in roughly 8 to 10 hours under normal conditions, depending on battery state and chemistry.
Bluetooth connectivity is built in as standard. Using the VictronConnect app, an installer or end user can select the correct battery profile, monitor charge status in real time, and review historical charge data. This removes the need for a separate display or data logger on straightforward single-battery installations. The app also allows the charger to be locked to a specific profile, which is useful when handing over to a non-technical end user.
The adaptive charging algorithm automatically adjusts charge time and voltage based on battery condition. A battery that is regularly discharged deeply will receive a longer absorption phase; one that is kept in good condition will move to float sooner. The storage mode reduces float voltage further to minimise electrolyte loss during long periods of inactivity.
Specifications
- SKU: BPC241331024
- Battery voltage: 24V
- Charge current: 13A
- AC input: 230V UK (BS 1363 plug)
- Number of outputs: 1
- IP rating: IP65
- Weight: 1.91 kg
- GTIN: 8719076051589
Applications
- Charging and maintaining 24V battery banks in motorhomes, campervans and caravans.
- Marine use on narrowboats and sailing vessels where moisture resistance is required.
- Commercial vehicle battery maintenance in workshops or fleet depots.
- Off-grid cabin or shed battery systems connected to a mains supply.
- Backup battery charging for 24V UPS or telecoms installations.
What Is Included
- Victron Blue Smart IP65 24/13 charger (1 output)
- UK BS 1363 mains plug (pre-fitted)
- Battery connection leads
Installation Notes
This charger connects directly to a standard UK 13A mains socket via the supplied BS 1363 plug. Ensure the battery terminals are correctly identified before connecting the output leads: reverse polarity will trigger the built-in protection, but repeated incorrect connection can damage the charger or battery. For permanent or semi-permanent installations in a vehicle or vessel, secure the charger to a fixed surface using the mounting points provided and ensure adequate ventilation around the unit. LiFePO4 battery profiles must be selected manually via the VictronConnect app before first use. If integrating this charger into a larger off-grid or marine electrical system, connection should be carried out by a qualified electrician or marine electrical engineer.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.