Description
xVictron Blue Smart IP67 Charger 12V 25A (1 Output) 230V CEE 7/7
The Victron Blue Smart IP67 12/25 is a single-output, 25-amp battery charger designed for 12V lead-acid and lithium battery banks. Built to IP67 standards, it is fully sealed against dust and temporary water immersion, making it suitable for demanding installation environments. It connects via a standard CEE 7/7 Schuko plug and is managed through the VictronConnect app over Bluetooth.
Key Features
- IP67-rated enclosure: fully dustproof and protected against immersion in water up to 1 metre for 30 minutes.
- 25A charge current on a single output, suitable for 12V battery banks from approximately 50Ah to 400Ah.
- Bluetooth built-in: configure charge algorithms, monitor charge status and view historical data via the VictronConnect app on iOS or Android.
- Compatible with a wide range of 12V battery chemistries including AGM, Gel, flooded lead-acid, and lithium (LiFePO4) with selectable charge profiles.
- Seven-stage adaptive charge algorithm with battery conditioning, bulk, absorption, float, storage, and equalisation modes.
- Temperature-compensated charging when used with an optional temperature sensor, protecting batteries in variable ambient conditions.
- CEE 7/7 Schuko mains plug for direct connection to standard European 230V sockets.
- Input voltage range of 90 to 265V AC, making it compatible with variable or unstable mains supplies.
Product Overview
The IP67 rating sets this charger apart from standard workshop or domestic chargers. The sealed aluminium housing means it can be permanently installed in engine bays, battery compartments, bilges, or outdoor enclosures where moisture ingress would damage a conventional unit. This is not a splash-resistant rating: IP67 means the unit can withstand full immersion, which matters in marine, vehicle and outdoor off-grid applications where condensation and water exposure are routine.
The seven-stage charge algorithm is adaptive, meaning the charger analyses battery condition during the bulk phase and adjusts absorption time accordingly. This reduces overcharging on batteries that are already partially charged and extends absorption on deeply discharged or sulphated batteries. The storage mode automatically reduces float voltage after a period of inactivity, which is important for batteries left on charge for extended periods. Equalisation mode is available for flooded lead-acid batteries that require periodic controlled overcharge to balance cell voltages.
VictronConnect integration is a practical advantage for installers and end users. Charge profiles can be set and adjusted wirelessly without physical access to the unit, which is useful when the charger is installed in a confined or awkward location. The app also provides charge history and fault logging, which aids diagnostics without requiring a site visit.
Specifications
- SKU: BPC122547006
- Battery voltage: 12V
- Charge current: 25A
- Number of outputs: 1
- Input voltage: 90 to 265V AC
- Mains plug: CEE 7/7 (Schuko)
- IP rating: IP67
- Weight: 2.4 kg
- GTIN: 8719076052333
Applications
- Marine vessels: permanent installation in bilge or battery compartments where moisture exposure is unavoidable.
- Motorhomes and campervans: charging leisure battery banks during mains hookup on site.
- Agricultural and plant machinery: maintaining 12V starter or auxiliary batteries in outdoor or wash-down environments.
- Off-grid cabins and outbuildings: charging 12V battery banks from a generator or mains supply.
- Vehicle fleets: maintaining batteries on vehicles in storage or low-use periods.
- Industrial equipment: charging 12V batteries in environments where the charger may be exposed to dust, spray or condensation.
What Is Included
- Victron Blue Smart IP67 12/25 charger with CEE 7/7 mains plug
- DC output cable with ring terminals
Installation Notes
This charger operates at 230V AC mains voltage. Ensure the mains supply circuit is correctly rated and protected with an appropriate fuse or MCB. The DC output should be fused as close to the battery as practical. For lithium (LiFePO4) battery installations, confirm the correct charge profile is selected via VictronConnect before commissioning. Although the IP67 rating allows installation in wet locations, the unit must not be submerged in operation. Permanent installations in vehicles or vessels should be carried out by a qualified electrician or marine electrical engineer familiar with the relevant wiring regulations.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.