Description
xVictron BlueSolar MPPT 150/100-Tr VE.Can Solar Charge Controller
The Victron BlueSolar MPPT 150/100-Tr VE.Can is a high-current MPPT solar charge controller rated for a 150V maximum PV input voltage and 100A charge current output. It is designed for professional off-grid and large battery charging installations where network monitoring, system integration and high charge capacity are required.
Key Features
- 150V maximum PV open-circuit voltage with 100A maximum charge current output.
- VE.Can port enables direct integration with Victron GX devices, Cerbo GX and the VictronConnect ecosystem for real-time monitoring and data logging.
- True MPPT algorithm continuously tracks the maximum power point, maintaining efficient energy harvest across varying irradiance and temperature conditions.
- TR (screw terminal) connection type for secure, high-current cable termination on both PV and battery sides.
- Compatible with a wide range of battery chemistries including lead-acid (AGM, gel, flooded) and lithium-ion where appropriate charge profiles are configured.
- Rotary switch for battery voltage selection, with additional fine-tuning available via VictronConnect software.
- Built-in protection against PV reverse polarity, battery reverse polarity, over-temperature and short circuit.
Product Overview
The 150/100-Tr VE.Can sits at the upper end of Victron's BlueSolar MPPT range. A 100A charge current means it can deliver up to 5.8kW of charge power into a 58V battery bank, or proportionally less at lower battery voltages. This makes it well suited to large 12V, 24V or 48V battery systems where multiple PV strings are combined before the controller. The 150V PV input ceiling allows for series-connected panel strings of reasonable length without requiring a high-voltage DC system.
The VE.Can interface is the key differentiator over the standard BlueSolar MPPT 150/100-Tr. It connects directly to the CAN-bus network used by Victron GX devices, allowing the charge controller to appear as a managed device within a larger system. This enables coordinated charging, state-of-charge awareness from a connected battery monitor, and full data visibility through the VRM portal. For installations with multiple MPPT controllers, VE.Can allows all units to be monitored from a single GX device without additional adaptors.
The TR designation refers to the screw terminal (Tr) connection format, which is appropriate for fixed installations using standard DC cable. The unit is housed in a metal enclosure and weighs 4.5kg, reflecting the thermal mass required to dissipate heat at sustained high charge currents.
Technical Specifications
| Specification | Value |
| SKU | SCC115110420 |
| Maximum PV Open-Circuit Voltage | 150V |
| Maximum Charge Current | 100A |
| Connection Type | Screw terminal (Tr) |
| Communication Interface | VE.Can |
| Weight | 4.5 kg |
| GTIN | 8719076049852 |
Applications
- Large off-grid systems with 24V or 48V battery banks requiring high charge current from multiple PV strings.
- Marine and motorhome installations where Victron GX-based system monitoring is already in use.
- Commercial off-grid cabins, telecoms shelters and remote power systems with data logging requirements.
- Multi-controller installations where VE.Can networking allows centralised monitoring of all charge sources.
- Battery charging systems integrated with Victron Quattro or MultiPlus inverter-chargers via a shared GX device.
What Is Included
- Victron BlueSolar MPPT 150/100-Tr VE.Can charge controller (1 unit)
Installation Notes
Installation should be carried out by a qualified electrician or accredited solar installer. The PV input voltage must not exceed 150V under any conditions, including cold-temperature open-circuit voltage. Ensure PV string Voc calculations account for minimum site temperatures. The VE.Can bus requires correct termination resistors at each end of the network; Victron supplies RJ45 terminators for this purpose. Battery chemistry and voltage must be correctly configured before commissioning. For off-grid systems connected to a generator or grid supply via an inverter-charger, coordinate charge settings across all devices to avoid conflicting charge sources.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.