Description
xVictron EasySolar-II 48/5000/70-50 MPPT 250/100 GX — PMP482507010
The Victron EasySolar-II 48/5000/70-50 MPPT 250/100 GX is an all-in-one solar inverter charger combining a 5000VA inverter, 70A battery charger, 100A MPPT solar charge controller and the GX monitoring platform in a single wall-mounted unit. It is designed for 48V battery systems and suits residential self-consumption, home storage and off-grid installations where a compact, integrated solution is required.
Key Features
- 5000VA / 4000W pure sine wave inverter output at 230V AC, suitable for demanding household and light commercial loads.
- Integrated 100A MPPT solar charge controller with a 250V maximum PV open-circuit voltage, supporting larger PV array configurations.
- Built-in 70A multi-stage battery charger compatible with 48V lead-acid and lithium battery banks.
- GX device integrated as standard, providing full VRM portal connectivity, remote monitoring and system configuration without additional hardware.
- Single-enclosure design reduces installation complexity and wiring compared to separate component installations.
- Supports PowerAssist functionality, allowing the unit to supplement a limited AC input (generator or shore power) with battery power to meet peak loads.
- Compatible with Victron's VE.Bus, VE.Direct and VE.Can communication protocols for integration with external BMS, displays and accessories.
- Weight of 38.8 kg in a wall-mount enclosure, suitable for fixed indoor installation.
Product Overview
The EasySolar-II range consolidates components that would otherwise require separate mounting, wiring and commissioning into one pre-integrated unit. The 48/5000/70-50 variant pairs a 5kVA inverter with a 100A MPPT controller rated to 250V input, which means it can accept a reasonably sized PV string without requiring a separate charge controller or additional DC cabling between components. This matters on installations where panel count is significant and DC wiring runs need to be kept short and tidy.
The integrated GX system is the same platform found in Victron's standalone Cerbo GX. It provides access to the VRM online portal for remote monitoring, supports two-way communication with compatible lithium BMS units, and allows configuration via the built-in display or remotely. For installers already working within the Victron ecosystem, this removes the need to source, mount and configure a separate GX device, which reduces both cost and commissioning time.
PowerAssist allows the unit to draw from both AC input and the battery simultaneously when loads exceed what the AC source can supply alone. This is particularly useful when the system is connected to a small generator, where running a large load would otherwise overload the generator. The 70A charger ensures the battery bank can be recharged efficiently from AC when solar input is insufficient.
Technical Specifications
| Parameter | Value |
| SKU | PMP482507010 |
| Inverter Output Power | 5000VA / 4000W |
| Battery Voltage | 48V |
| Battery Charger Current | 70A |
| MPPT Charge Controller Current | 100A |
| Maximum PV Open-Circuit Voltage | 250V |
| AC Output Voltage | 230V |
| GX Device | Integrated |
| Weight | 38.8 kg |
| GTIN | 8719076049333 |
Applications
- Residential home storage systems with 48V lithium or lead-acid battery banks.
- Off-grid cabins, rural properties and agricultural buildings where grid connection is unavailable or uneconomical.
- Self-consumption solar installations where excess PV generation is stored and used to reduce grid import.
- Generator-backed off-grid systems where PowerAssist is needed to handle peak loads beyond the generator's rated output.
- Marine and vehicle applications requiring a high-capacity, integrated 48V inverter charger with solar input.
What Is Included
- Victron EasySolar-II 48/5000/70-50 MPPT 250/100 GX unit (wall-mount enclosure)
Installation Notes
This unit must be installed by a qualified electrician or MCS-accredited installer. At 38.8 kg, two-person handling is required for safe wall mounting. The 48V DC battery connections and high-current MPPT inputs must be correctly fused and cabled to the manufacturer's specifications. For any grid-connected application in the UK, confirm compliance requirements with your DNO and ensure the installation meets G98 or G99 regulations as applicable. Lithium battery integration requires a compatible BMS with the appropriate communication interface. Do not connect to the AC grid without confirming the correct relay and protection settings via the GX interface.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.