Description
xVictron MultiPlus-II 48/3000/35-32 230V Inverter Charger
The Victron MultiPlus-II 48/3000/35-32 is a combined inverter and battery charger designed for 48V battery systems operating at 230V AC. It is suited to off-grid installations, backup power systems, and solar energy storage applications where a reliable, single-unit inverter charger is required. The integrated transfer switch and PowerAssist function make it a practical choice for both standalone and grid-connected setups.
Key Features
- 3000VA continuous inverter output at 230V AC from a 48V DC battery bank.
- 35A battery charger built in, with adaptive charge algorithm to suit a range of battery chemistries.
- 32A AC input current limit, with PowerAssist to supplement grid or generator supply during peak loads.
- Integrated transfer switch for automatic changeover between mains/generator and inverter operation.
- Two AC outputs: AC-Out-1 remains live during mains failure; AC-Out-2 disconnects when inverting, allowing non-critical loads to be shed.
- Compatible with Victron VE.Bus for system integration, parallel operation, and three-phase configuration.
- Programmable via VictronConnect and Venus OS (GX devices) for remote monitoring and control.
- Supports PowerControl to prevent overloading a limited shore or generator supply.
Product Overview
The MultiPlus-II 48/3000/35-32 combines a pure sine wave inverter with a multi-stage battery charger in a single unit. The 48V DC input voltage is well suited to larger battery banks where lower current draw reduces cable losses and improves overall system efficiency compared to 12V or 24V alternatives. At 3000VA, the unit can handle most household or light commercial loads, including motor starting currents that would trip a lesser inverter.
PowerAssist is a key practical feature for installations where the available grid or generator supply is limited. When load demand exceeds the incoming AC supply, the MultiPlus-II draws the shortfall from the battery rather than tripping the supply breaker. This allows a smaller generator to be used without risk of overload. PowerControl performs a similar function by capping the AC input draw to a user-defined limit, protecting the supply connection.
The VE.Bus interface allows multiple units to be connected in parallel for increased capacity, or configured for split-phase or three-phase output. This makes the MultiPlus-II 48/3000/35-32 a scalable platform for larger installations. Integration with Victron GX devices (such as the Cerbo GX) enables full system monitoring via the VRM portal, including battery state of charge, AC input and output data, and remote firmware updates.
Technical Specifications
| Parameter | Value |
| SKU | PMP482305012 |
| DC Input Voltage | 48V |
| Inverter Output | 3000VA / 2400W |
| AC Output Voltage | 230V AC |
| Battery Charger Output | 35A |
| AC Input Current Limit | 32A |
| AC Input Voltage Range | 230V AC |
| Transfer Switch | Integrated |
| Communication Interface | VE.Bus |
| Weight | 18.35 kg |
| GTIN | 8719076058359 |
Applications
- Off-grid residential and cabin installations with a 48V battery bank.
- Solar self-consumption systems with battery storage, integrated via a Victron GX device.
- Backup power for critical loads, with automatic transfer from mains to inverter on supply failure.
- Generator-assisted systems where PowerAssist allows a smaller genset to cover peak demand.
- Scalable multi-unit installations requiring parallel or three-phase configuration via VE.Bus.
- Marine and vehicle applications where a 48V DC supply and 230V AC output are required.
What Is Included
- 1x Victron MultiPlus-II 48/3000/35-32 230V inverter charger unit.
Installation Notes
Installation should be carried out by a qualified electrician or MCS-accredited installer. The MultiPlus-II connects to both a 48V DC battery bank and a 230V AC supply, and incorrect wiring presents a serious risk of electric shock or fire. For grid-connected applications in the UK, compliance with G98 or G99 requirements must be confirmed with your Distribution Network Operator (DNO) before connection. Battery bank sizing, cable ratings, and fusing must be calculated to suit the 35A charge current and the inverter's peak output demands. Programming via VE.Configure or VictronConnect should be completed before commissioning.
Specifications
x
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.