Global Delivery Available
Solar Experts Since 2002
5 Year Extended WarrantyEasySolar-II GX 48/3000/35-32 MPPT 250/70 GX - Inverter Charger 3kW
Easy Solar Inverter and Solar Battery Charger - Combined Unit 3kW - GX Version
All-in-one solar power solution. The EasySolar-II GX combines a MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure.
The product is easy to install, with a minimum of wiring.
Features
The all-in-one solar power solution
The Victron EasySolar-II GX integrates the following elements:
- A MultiPlus-II inverter/charger
- A SmartSolar MPPT -Tr solar charge controller
- A GX device with a 2 x 16 character display
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Display and wifi
The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other wifi enabled device. In addition, wifi can be used to set up the system and to change settings.
Solar charge controller
The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.
GX device
The integrated GX device includes:
- A VE.Can interface. This can be used to connect to Victron VE.Can devices (e.g. VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery
- A USB port
- A Ethernet port
- A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.
|
EasySolar-II GX |
EasySolar-II 48/3000/35-32 MPPT 250/70 GX |
|
INVERTER/CHARGER |
|
|
PowerControl & PowerAssist |
Yes |
|
Transfer switch |
32A |
|
Maximum AC input current |
32A |
|
Auxiliary output |
Yes (32A) |
|
INVERTER |
|
|
Input voltage range |
38 – 66V |
|
Output |
Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1) |
|
Cont. output power at 25°C (3) |
3000VA / 2400W |
|
Cont. output power at 40°C / 65°C |
2200W / 1700W |
|
Maximum apparent feed-in power |
2500VA |
|
Peak power |
5500W |
|
Maximum efficiency |
95% |
|
Zero load power |
11W |
|
Zero load power in AES mode |
7 W |
|
Zero load power in Search mode |
2W |
|
CHARGER |
|
|
AC Input |
Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz |
|
Charge voltage 'absorption' |
57,6V |
|
Charge voltage 'float' |
55,2V |
|
Storage mode |
52,8V |
|
Maximum battery charge current (4) |
35A |
|
Battery temperature sensor |
Yes |
|
Programmable relay (5) |
Yes |
|
Protection (2) |
a - g |
|
VE.Bus communication port |
For parallel and three phase operation, remote monitoring and system integration |
|
General purpose com. port |
Yes, 2x |
|
SOLAR CHARGE CONTROLLER |
|
|
Model |
SmartSolar MPPT 250/70-Tr |
|
Maximum output current |
70A |
|
Maximum PV power |
4000W |
|
Maximum PV open circuit voltage |
250V |
|
Maximum efficiency |
98% |
|
Self-consumption |
20mA |
|
Charge voltage 'absorption', default |
57,6V |
|
Charge voltage 'float', default setting |
55,2V |
|
Protection (2) |
a – e |
|
GENERAL |
|
|
Interfaces |
VE.Can, USB, Ethernet, VE.Direct, wifi |
|
Remote on-off |
Yes |
|
Operating temp. range |
-40 to +65°C (fan assisted cooling) |
|
Humidity (non-condensing): |
max 95% |
|
ENCLOSURE |
|
|
Material & Colour |
aluminium (blue RAL 5012) |
|
Protection category |
IP21 |
|
Battery-connection |
M8 bolts |
|
PV connection |
M6 bolts |
|
230 V AC-connection |
Screw terminals 13 mm2 (6 AWG) |
|
Weight |
26kg |
|
Dimensions (hxwxd) |
506 x 275 x 237 mm |
|
STANDARDS |
|
|
Safety EN-IEC 60335-1, EN-IEC 60335-2-29 EN-IEC 62109-1, EN-IEC 62109-2 |
|
|
EN 55014-1, EN 55014-2 Emission / Immunity EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
|
|
Anti-islanding See our website |
|
|
1) Can be adjusted to 60 Hz 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) 230 VAC on inverter output g) input voltage ripple too high |
3) Non-linear load, crest factor 3:1 4) At 25°C ambient 5) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function. AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
