Description
xThe most powerful single-phase inverter & charger ever made. 8kW Continuous AC Output Power
The Conversol Off Grid Solar Inverter with integrated battery charger is a fast, accurate and reliable charger for lead-acid, lithium-ion and LifePO4 batteries. Its 8kw pure sinewave output is capable of powering an entire house, yet it’s still compact and weighs only 18kg. Labeled terminals make identification and installation easier while changing colours make operation status obvious.
This Conversol Inverter includes 3 sets of power cables and power ports: AC output, two independent MPPT chargers for solar panels and 48V battery terminals. It can connect to a grid or generator for uninterrupted power and operate in off-grid mode to supply AC power for large appliances, including air conditioners and water pumps. This inverter can be controlled from around the globe with an integrated Wi-Fi module and has an extended warranty for up to 5 years.
WITH AC MAINS TIMER SETTING FOR CHARGING WHENEVER YOU WANT.
The inverter is ideal for scheduled charging thanks to the integrated timer, the user can set a specific charging window to recharge the batteries when the electricity cost is lower.
UNIQUE SELLING POINTS
- High Tech Features and Easy Diagnostics
- Integrated Wi-Fi communication card
- RGB Light, status indicator
- Remote Communication Panel
- Parallel Function of up to 6 units
- Direct connection to DC loads (fans, bulbs, router etc)
- Anti-dust filter pre-installed
- Ready to communicate with Lithium Ion Batteries (Pylon US2000 & US3000, Li-2021)
- Compatible with all lead-acid batteries (AGM, GEL, Forklift, leisure, flooded)
- Wide MPPT voltage from 90V to 450V
Product Description
Conversol Max is the 4th generation off-grid inverter with rich new functions. Its detachable LCD control module can be turned into a remote panel. It’s also integrated with a Bluetooth interface ready for mobile monitoring and supports a USB on-the-go function to facilitate data upload/download. Battery independence design enhances this inverter to operate without a battery. You can install a 48V battery bank later on.
Main Features at a glance
- Power rating (active), 8000Watt continuous, 16000 Watt surge power
- Battery Equalizer to extend the life of the batteries
- DC Input Voltage, 48Vdc input voltage from batteries
- Suitable for, 230Vac / 50Hz output voltage
- Maximum PV Power, 8000 Wp (2x 4000W)
SPECIAL FEATURES:
- Detachable LCD control module with multiple communications
- Built-in Bluetooth for mobile monitoring (Android/Apple App is available)
- Supports USB On-the-Go function
- Reserved communication port for BMS (RS485, CAN-BUS or RS232)
- Replaceable fan design for ease of maintenance
- Supply load from Grid or PV, even battery is not available
- Configurable AC/PV output usage timer and prioritization
- Selectable high-power charging current
- Selectable input voltage range for home appliances and personal computers
- Compatible with Utility Mains or generator input
- Auto restart while AC is recovering
- Cold start function
TECHNICAL FEATURES
- MPPT 80A, 2x 4000W max solar chargers, Digital Signal Processor
- Built-in 3-stage high-efficiency battery charger 80A
- Supports 50/60Hz via LCD program
- 8kW pure sine wave output with up to 2X surge max 5 seconds
- 48Vdc batteries should be connected to this unit
- Communication USB/RS232/RS485/Bluetooth/Dry-contact
- UPS Transfer time <10ms
- Programmable LCD with menu
- Can work continuously 24 hours
- Intelligent battery charging control
- Protection system and warnings/alarms for over-temperature, over-voltage, over-current, under-voltage, short circuit, and many more
- Full list of certificates available upon request (CE, EMC, TUV)
PROPOSED CONFIGURATIONS WITH SOLAR PANELS.
The maximum number of strings for each MPPT input is 2. Two photovoltaic strings with voltage up to 500V feed energy to one MPPT input. A combiner box is compulsory for the safe connection of solar panels to the inverter.
2x 8 Solar panels for MPPT 1
2x 8 Solar Panels for MPPT 2
Alternative Combination
1x 8 Solar panel string for MPPT 1
1x 8 Solar panel string for MPPT 2
Specifications
x| MODEL |
Conversol 8kW Max |
|
| Rated Power |
8000Watt / 800VA |
|
|
INPUT |
||
| Voltage | 120 VAC or 230 VAC | |
| Selectable Voltage Range | 170-280 VAC (For Personal Computers) 90-280 VAC (For Home Appliances) |
|
| Frequency Range | 50 Hz/60 Hz (Auto-sensing) | |
|
OUTPUT |
||
| AC Voltage Regulation (Batt. Mode) | 230VAC ± 5% | |
| Surge Power | 15000VA |
|
| Efficiency (Peak) | 90% - 93% | |
| Transfer Time | 10 ms (For Personal Computers) 20 ms (For Home Appliances) |
|
| Waveform | Pure sine wave | |
|
BATTERY |
||
| Battery Voltage |
48 VDC |
|
| Floating Charge Voltage |
54 VDC |
|
| Overcharge Protection |
66 VDC |
|
| SOLAR CHARGER & AC CHARGER | ||
| Maximum PV Array Power |
8000 W (2x4000W) |
|
| MPPT Range @ Operating Voltage |
90 VDC ~450 VDC |
|
| Maximum PV Array Open Circuit Voltage |
450 VDC |
|
| Maximum Solar Charge Current | 80 A | |
| Maximum AC Charge Current | 80 A | |
| Maximum Charge Current | 160A | |
| Maximum Efficiency | 98% | |
| Standby Power Consumption | 2W | |
| PHYSICAL | ||
| Dimension, D X W X H (mm) | 147.4 X 432.5 X 553.6 | |
| Net Weight (kgs) | 18.4 | |
| OPERATING ENVIRONMENT | ||
| Humidity | 5% to 95% Relative Humidity(Non-condensing) | |
| Operating Temperature | 0℃ to 55℃ | |
| Storage Temperature | -15℃ to 60℃ | |
* There are charging current selection only available for 230VAC system.
Communication ports: USB, DRY contact, RS485, WiFi, RS232
Overload Capacity : 5sec @ > 150% load, 10sec @ 110%-150% load, 100ms @>200% load
Product specifications are subject to change without further notice
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Non-faulty items returned after 14 days and/or not in their original, undamaged packaging can only be exchanged for store credit - 15% off the items returned.
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.