Description
x16kW Off-Grid Solar Kit – 20kWh Pylontech US5000, 20x JA Solar 465W Panels
This complete off-grid solar kit is built around two parallel Conversol MAX 8kW inverter-chargers and four Pylontech US5000 lithium batteries providing 20kWh of usable storage. Twenty JA Solar 465W monocrystalline panels deliver 9,300W of PV capacity, with the system able to accept up to 40 panels (18,600W) for future expansion. The kit is designed for domestic and commercial properties requiring continuous off-grid power or grid-backup capability.
Key Features
- 16kW output via 2x Conversol MAX 8kW inverters in parallel
- 4x Pylontech US5000 48V 5.12kWh lithium batteries, 20kWh total at 95% DoD
- 20x JA Solar 465W monocrystalline panels, 9,300W total PV
- Expandable to 40 panels (18,600W) and up to 6 parallel inverters
- AC charge timer for off-peak tariff charging
- Solar Assistant monitoring kit included, no annual subscription
- Black metal indoor cabinet included
- Victron Lynx Distributor (1000A busbar) included
- Solar PV combiner box 4-in/4-out included
- AC combiner box for paralleling two AC outputs included
- Full cabling: 50m 6mm red and black solar cable
- Battery disconnectors, fuses, and BMS communication cable included
Product Overview
The system is designed to power domestic and commercial single phase loads continuously, with a peak output of 16kW sufficient for most 2 to 4 bedroom residential properties and many small commercial premises. The two parallel Conversol MAX inverters provide both the power capacity and redundancy required for 24/7 operation.
With an AC charge timer built into the inverter, the battery bank can be topped up from the grid at low-cost overnight tariff rates when solar generation is insufficient. The system can operate with grid backup, generator backup, or fully off-grid depending on site requirements.
The Solar Assistant monitoring kit stores performance data on an internal SD card for up to 10 years and provides remote monitoring via Wi-Fi at no ongoing cost. It is supplied pre-configured and ready to connect.
Solar panels are supplied with a triangular adjustable mounting structure suitable for flat surface and ground installations. Alternative mounting options are available on request at no extra cost.
What Is Included
- 2x Conversol MAX 8kW MPPT inverter-charger
- 4x Pylontech US5000 48V 5.12kWh lithium battery
- 20x JA Solar 465W monocrystalline panels with mounting structure
- Black metal indoor cabinet
- 2x Battery disconnector 200A
- 4x Battery fuses
- 50m 6mm black solar cable and 50m 6mm red solar cable
- AC combiner box for paralleling two AC outputs
- BMS communication cable
- Solar Assistant monitoring kit
- 2x 2-metre 70mm² battery power cables
- Solar PV combiner box 4-in/4-out
- Victron Lynx Distributor (1000A busbar)
Applications
- Domestic off-grid solar power systems
- Grid-backup installations for homes and small commercial premises
- Properties in areas with unreliable grid supply
- EV charging combined with home energy supply
Installation and Safety Notes
This kit must be installed by a qualified electrician experienced in off-grid and battery storage systems. DC wiring, battery connections, fusing, earthing, and ventilation must comply with IET Wiring Regulations and the manufacturers' installation guidelines. Do not attempt DIY installation of high-current DC or inverter systems.
Specifications
x| Parameter | Value (Pylontech US5000) |
| Nominal Voltage | 51.2 V |
| Voltage Range | 47.5–57.6 V |
| Nominal Capacity | 100 Ah |
| Nominal Energy | 5.12 kWh |
| Recommended Charge / Discharge Current | 100 A |
| Max Continuous Current | 101–120A (3 min); 121–180A (15 sec) |
| Chemistry | LiFePO4 |
| DC Connection | PHOENIX M6 Bolt |
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.