Description
xPylontech 219kWh A300 Commercial Hybrid Battery Energy Storage
The Pylontech A300 219kWh is a complete commercial battery storage system supplied as a factory-assembled cabinet. It is designed for businesses that need to cut electricity costs, make better use of solar generation, and maintain reliable power during grid outages or peak demand periods.
The system arrives pre-built and ready to connect, which reduces installation time and complexity compared with building a large battery system from individual components on site. It can be configured with one or two hybrid inverters depending on the site power requirement, charge rate and backup capacity needed.
Key Features
- 219kWh LFP battery capacity in a single factory-assembled cabinet
- Available with 1 or 2 hybrid inverters to match site requirements
- IP55-rated outdoor enclosure with integrated active cooling
- Integrated EMS for intelligent charge and discharge management
- Built-in fire protection and battery management system
- Supports solar self-consumption, peak shaving, electricity arbitrage and grid backup
- Suitable for commercial, industrial, agricultural and EV charging sites
Product Overview
At 216kWh, this system provides a substantial energy reserve for sites with significant daily electricity consumption. Energy is stored when solar production is high or when import tariffs are lower, then discharged during expensive peak periods or when the grid is unavailable. The result is lower electricity bills and greater resilience against supply interruption.
The single inverter configuration suits most standard commercial storage and solar self-consumption applications. The dual inverter option is better suited to sites with higher peak loads, faster charging requirements, or where stronger backup capacity is needed for critical circuits.
All battery modules, BMS, cooling, safety protection and energy management are integrated and factory tested before delivery. There is no need to source, size and wire individual components on site.
Applications
- Commercial premises: offices, warehouses, factories and retail sites
- Agricultural sites and farms with solar PV
- EV charging hubs requiring grid buffering or off-peak charge storage
- Industrial sites with high peak demand requiring load smoothing
- Microgrid and partial off-grid commercial installations
- Sites requiring long-duration backup for critical loads
Installation Notes
This system must be installed by a qualified electrical engineer with experience in commercial battery storage. Site assessment, load analysis, grid connection compliance and commissioning must be completed by a certified installer. Contact us to discuss project requirements, inverter configuration and site suitability before ordering.
Specifications
xTechnical Specifications
General Data
| Model | M5 300kWh 1000V |
| Dimensions (W x D x H) | 1500 x 1300 x 2200 mm (without inverter) |
| Weight | 3.5 tons |
| Working Temperature Range | -20°C to 55°C (derating below 10°C or above 40°C) |
| Protection Class | IP55 |
| Altitude | ≤3000 m |
| Humidity | 0 to 95% |
| Fire Extinguishing | Aerosol |
| Cooling System | Air Cooling |
| Cooling Consumption (Cooling/Heating) | 5 kW / 6.4 kW |
| Auxiliary Power Consumption (continuous/peak) | 2.35 kW / 4 kW (incl. HVAC) |
| Max Parallel Systems | 5 |
| Anti Corrosion | C3 |
Battery Data
| Battery Type | Li-ion (LFP) |
| Nominal Capacity | 313 kWh |
| Continuous Operation C-rate | 0.5C |
| Max Operation Current | 180 A x 2 |
| Depth of Discharge | 98% (single string) |
| Cycle Life | >7000 |
| DC Voltage Range | 560 to 720 Vdc (single string) |
| Nominal Operation Current | 122.5 A x 2 |
| Round-trip Efficiency @ 0.5C | 96% |
Hybrid Inverter Data (On-grid Mode)
| Rated AC Power | 50 kW / 100 kW |
| Rated AC Output Voltage | 400 Vac |
| Rated AC Output Frequency | 50 / 60 Hz |
| Max AC Current | 76 A (linear load) |
| Overload Capacity | 110% |
| AC Power Factor | >0.99 (0.8 leading to 0.8 lagging) |
| CEC Efficiency | 97.4% (max 97.8%) |
| Isolation Type | Non isolation |
| Response Time (on-grid to off-grid) | <10 ms |
Communication and Operation
| Communication Type | RS485 (Modbus RTU) / LAN (Modbus TCP/IP) / CAN |
| Operation Logic | Peak Shaving, Energy Shifting, Self-consumption, Backup |
Certifications
| UN38.3, UN 3480, IEC62619, IEC62040-1, CE, UKCA (EMC/RED), VDE2510-50, UL1973, UL9540A, G99, VDE-AR-N 4105, EN 50549-1, EN 50549-10, EIFS 2018.2, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530 |
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.