Description
xVictron Energy 12V 240Ah AGM Deep Cycle Battery (M8 Terminals)
The Victron Energy 12V 240Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery designed for demanding cyclic applications in solar, off-grid and marine installations. With M8 threaded insert terminals and a 240Ah capacity, it suits professional installations where reliable, high-capacity energy storage is required without the complexity of lithium systems.
Key Features
- 240Ah capacity at 12V nominal voltage, providing substantial energy storage for off-grid and backup applications.
- AGM (Absorbent Glass Mat) construction: sealed, valve-regulated and spill-proof, suitable for installation in enclosed spaces.
- M8 threaded insert terminals allow secure, torque-controlled connections and are compatible with standard M8 bolt fixings.
- Deep cycle design rated for repeated charge and discharge cycles, unlike standard standby or starter batteries.
- Maintenance-free operation: no topping up of electrolyte required throughout the battery's service life.
- 65.1 kg weight reflects the high-capacity lead-acid construction; installation planning for weight loading is essential.
- Compatible with Victron MPPT charge controllers, MultiPlus and Quattro inverter/chargers when programmed to the correct AGM charge profile.
Product Overview
AGM batteries use a glass mat separator to hold the electrolyte in place, eliminating free liquid inside the cell. This makes them safe to install in orientations other than upright, and suitable for use in vehicles, boats and enclosed battery enclosures where a flooded battery would not be permitted. The valve-regulated design means gas recombination occurs internally under normal operating conditions, with the safety valve only opening under fault or overcharge conditions.
At 240Ah, this battery is suited to applications where a single large-capacity 12V unit is preferable to paralleling smaller batteries. Parallel configurations are possible with Victron AGM batteries, but minimising the number of parallel strings generally improves long-term reliability and simplifies battery management. For 24V or 48V systems, two or four units can be connected in series respectively.
Correct charging is critical to AGM battery longevity. These batteries require a charge voltage within the manufacturer's specified AGM profile. Overcharging accelerates water loss and grid corrosion; undercharging leads to sulphation. Victron MPPT and inverter/charger products include a dedicated AGM preset, which simplifies correct configuration when used together.
Specifications
- SKU: BAT412124081
- Nominal Voltage: 12V
- Capacity: 240Ah
- Terminal Type: M8 threaded insert
- Chemistry: AGM (Absorbent Glass Mat), VRLA
- Weight: 65.1 kg
- GTIN: 8719076045489
Applications
- Off-grid solar energy storage in residential, agricultural and remote site installations.
- Marine house battery banks where sealed, spill-proof construction is required.
- Motorhome and large vehicle leisure battery installations.
- UPS and backup power systems requiring deep cycle capability.
- Telecoms and industrial standby applications with regular cycling demands.
- Series or parallel battery banks in 12V, 24V or 48V Victron system configurations.
What Is Included
- 1 x Victron Energy 12V 240Ah AGM Deep Cycle Battery (M8 terminals)
Installation Notes
At 65.1 kg, this battery requires two people or mechanical assistance to position safely. Ensure the installation surface and any battery enclosure are rated for the weight. M8 terminal bolts should be torqued to the manufacturer's specification to avoid terminal damage or loose connections. Always use appropriately rated DC cabling and fusing between the battery and any inverter, charger or load. AGM batteries must be charged using a charger or charge controller set to the correct AGM voltage profile. Connection to solar inverter/chargers or grid-tied systems should be carried out by a qualified electrician or MCS-accredited installer. Do not install in a fully sealed, unventilated enclosure as the safety valve may vent gas under fault conditions.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.