Description
xVictron Energy 12V 60Ah Gel Deep Cycle Battery
The Victron Energy 12V 60Ah Gel Deep Cycle Battery is a sealed, maintenance-free battery designed for cyclic and standby applications in solar, off-grid and marine systems. Its gel electrolyte construction makes it suitable for installations where battery orientation or ventilation is restricted. Rated at C20 capacity, it is built for repeated deep discharge and recharge cycles.
Key Features
- 60Ah capacity rated at C20 discharge rate, providing a reliable baseline for system sizing.
- Gel electrolyte construction eliminates free liquid acid, reducing the risk of spillage and corrosion in confined or tilted installations.
- Sealed, valve-regulated (VRLA) design requires no water topping and produces minimal gas under normal operating conditions.
- Deep cycle rated, meaning the battery is designed to withstand repeated discharge to low state-of-charge levels without premature capacity loss.
- 12V nominal voltage, compatible with standard 12V charge controllers, inverters and battery monitors.
- 18kg weight provides a compact energy density suitable for mobile, marine and off-grid enclosures.
Product Overview
Gel batteries use a silica-based gelled electrolyte rather than free liquid acid. This immobilises the electrolyte, which means the battery can be mounted in any orientation except inverted, and is less susceptible to vibration damage than flooded lead-acid alternatives. In solar and off-grid applications, where batteries may sit in unventilated enclosures or vehicle-mounted battery boxes, this matters practically.
The C20 rating means the 60Ah capacity is measured over a 20-hour discharge period. In practice, drawing higher currents over shorter periods will reduce the available capacity, which is standard behaviour for lead-acid chemistry. When sizing a system, use the C20 figure as the starting point and apply a derating factor for high-current loads. Victron's gel range is designed to work directly with Victron charge controllers and inverter-chargers, which include gel-specific charge profiles to protect cycle life.
As a VRLA battery, it recombines the gases produced during charging internally under normal conditions. This makes it suitable for use in enclosed spaces, though adequate ventilation is still recommended as a precaution, particularly if the battery may be subject to overcharging.
Specifications
- SKU: BAT412550104
- Nominal Voltage: 12V
- Capacity: 60Ah (C20)
- Chemistry: Gel VRLA (Valve-Regulated Lead-Acid)
- Weight: 18kg
- GTIN: 8719076037149
Applications
- Solar off-grid systems with 12V battery banks requiring deep cycle capability.
- Marine and narrowboat house battery installations where spillage resistance is required.
- Motorhome and campervan leisure battery systems.
- UPS and standby power applications in commercial or industrial settings.
- Remote monitoring stations, telecoms cabinets and other unattended installations.
What Is Included
- 1 x Victron Energy 12V 60Ah Gel Deep Cycle Battery
Installation Notes
This battery should be installed by a qualified electrician or experienced system integrator. Ensure the charge source (solar charge controller, inverter-charger or mains charger) is set to the correct gel charge profile. Using an AGM or flooded charge profile risks overcharging, which can permanently damage gel cells. Batteries should be installed in a ventilated location away from heat sources and direct flame. Terminal connections must be torqued correctly and protected against short circuit. For solar PV system installations, use an MCS-accredited installer where required by your DNO or insurer.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.