Description
xVictron Centaur Charger 12V 30A (3 Outputs) 120-240V
The Victron Centaur Charger 12/30(3) is a three-output, mains-powered battery charger designed for professional marine, vehicle and off-grid applications. It delivers 30 amps across a 12V battery bank and accepts a wide AC input range of 120 to 240V, making it suitable for use across the UK, EU and North America. It is built for installations where multiple battery banks need to be charged simultaneously from a single unit.
Key Features
- 30A total charge current at 12V across three independent output channels.
- Wide AC input voltage range of 120 to 240V, compatible with UK, EU and North American supplies.
- Three separate outputs allow simultaneous charging of multiple battery banks (e.g. starter, service and bow thruster batteries).
- Microprocessor-controlled adaptive four-stage charging algorithm: bulk, absorption, float and storage.
- Compatible with a wide range of battery chemistries including flooded, gel and AGM lead-acid batteries.
- Temperature-compensated charging via optional sensor to protect batteries in varying ambient conditions.
- Fully sealed and protected against reverse polarity, short circuit and high temperature.
Product Overview
The Centaur range uses a microprocessor-controlled adaptive charging algorithm that adjusts automatically to the condition of the battery. During bulk charge, the full 30A output is applied. As the battery approaches full charge, the charger transitions to absorption mode, holding voltage constant while current tapers. Float and storage modes then maintain the battery without overcharging, which is particularly important in permanent or seasonal installations where the charger may remain connected for extended periods.
The three-output design is a practical advantage in marine and vehicle installations where separate battery banks serve different functions. Each output is independently managed, so a deeply discharged service bank will not prevent the starter battery from receiving a proper charge. The 120-240V AC input means the same unit can be used on UK shore power, European marinas or North American supplies without modification.
Victron's Centaur chargers are built to a high standard of electrical protection. Reverse polarity, short circuit and thermal overload protection are all built in, reducing the risk of damage during installation or in fault conditions. The unit weighs 4.3kg, which is compact enough for most panel or bulkhead mounting positions.
Specifications
- SKU: CCH012030000
- Battery voltage: 12V
- Charge current: 30A
- Number of outputs: 3
- AC input voltage: 120-240V
- Weight: 4.3kg
- GTIN: 8719076021483
Applications
- Marine vessels with multiple battery banks (starter, service, bow thruster).
- Motorhomes and coaches requiring simultaneous charging of chassis and habitation batteries.
- Off-grid cabins and leisure installations with mains or generator AC supply.
- Commercial vehicles and ambulances with auxiliary battery systems.
- Shore power charging at marinas operating on 120V or 240V supplies.
What Is Included
- Victron Centaur Charger 12/30(3) 120-240V unit.
Installation Notes
Installation should be carried out by a qualified electrician or marine electrical engineer. Ensure the AC supply is correctly fused and that all DC output connections are made with appropriately rated cable and fusing for each battery bank. The unit accepts 120-240V AC, but the supply must be stable and earthed correctly. For marine installations, follow the relevant BMEA or IEC wiring standards. Temperature sensor accessories are available separately from Victron and are recommended for installations where ambient temperatures vary significantly.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.