Description
xVictron Inverter 24V 2500VA 230V Smart
The Victron Inverter 24/2500 230V Smart is a pure sine wave inverter designed for off-grid and backup power applications running from a 24V battery bank. It delivers up to 2,400W of continuous power at 25°C and includes built-in Bluetooth for wireless monitoring and configuration via the VictronConnect app.
Key Features
- 2,400W continuous output at 25°C, with a 4,000W peak power rating for motor and compressor starting loads
- Built-in Bluetooth and VE.Direct port for full configuration and monitoring via VictronConnect
- Dynamic Low DC Shutdown adjusts the low battery cut-off threshold based on load, protecting the battery bank without unnecessary shutdowns
- ECO mode reduces no-load consumption to 1.6W by switching the inverter off when no load is detected and restarting when demand returns
- Programmable relay rated at 230V/4A AC or 4A DC (up to 35VDC) for external signalling or load control
- Remote on/off terminal allows integration with external control systems or a simple switch
- Comprehensive protection: output short-circuit, overload, high and low battery voltage, over-temperature, AC voltage on output, and excessive DC ripple
- Rated IP21 and tested to EN-IEC 60335-1, with ECE R10-5 automotive directive compliance for mobile applications
Product Overview
The 24/2500 Smart operates from a 24V nominal battery bank with a DC input range of 18.6V to 34V. At 25°C it delivers 2,400W continuously, derated to 2,200W at 40°C and 1,500W at 65°C. The 94% maximum efficiency and 10W no-load draw (1.6W in ECO mode) make it practical for installations where the inverter spends significant time on standby, such as off-grid cabins, vehicles and backup systems.
Bluetooth connectivity is built in, so no additional interface hardware is needed for commissioning or monitoring. VE.Direct provides a wired data connection to compatible Victron devices including the Color Control GX and other GX-series monitors. All parameters, including ECO mode thresholds and low battery shutdown behaviour, are configurable through VictronConnect.
The steel enclosure measures 509 x 219 x 125mm and weighs 13kg. Battery connections use M8 bolts and AC connections use screw terminals, both suited to permanent fixed wiring. The operating temperature range of -40°C to 65°C covers demanding environments including cold-climate off-grid sites and vehicle installations.
Technical Specifications
| Parameter | Value |
| Nominal Battery Voltage | 24V |
| DC Input Voltage Range | 18.6V to 34V |
| AC Output Voltage | 230V / 50Hz |
| Continuous Power at 25°C | 2,400W |
| Continuous Power at 40°C | 2,200W |
| Continuous Power at 65°C | 1,500W |
| Peak Power Rating | 4,000W |
| Maximum Efficiency | 94% |
| No-Load Power Consumption | 10W |
| ECO Mode Consumption | 1.6W |
| ECO Mode Threshold | Adjustable |
| Dynamic Low DC Shutdown | Yes |
| Communication | Bluetooth, VE.Direct |
| Remote On/Off Terminal | Yes (screw terminal, 2-pole) |
| Programmable Relay | 230V/4A AC; 4A up to 35VDC; 1A up to 60VDC |
| Battery Connection | M8 bolts |
| AC Connection | Screw terminals |
| Protection Category | IP21 |
| Operating Temperature | -40°C to 65°C |
| Maximum Humidity | 95% |
| Safety Standard | EN-IEC 60335-1 |
| EMC Standards | EN 55014-1, EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3 |
| Automotive Directive | ECE R10-5 |
| Enclosure Material | Steel (Blue RAL 5012 / Black RAL 9017) |
| Dimensions (H x W x D) | 509 x 219 x 125mm |
| Weight | 13kg |
| SKU | PIN242251000 |
Applications
- Off-grid cabins and rural properties running from 24V lead-acid or lithium battery banks
- Vehicle and marine installations requiring ECE R10-5 compliant inverters
- Backup power systems where standby efficiency is a priority
- Mobile off-grid setups such as expedition vehicles, motorhomes and working vans
- Solar off-grid systems integrated with Victron MPPT charge controllers and GX monitoring devices
What Is Included
- Victron Inverter 24/2500 230V Smart unit
Installation Notes
This inverter should be installed by a qualified electrician familiar with DC battery systems and off-grid AC wiring. Battery cables must be correctly rated and fused close to the battery terminals. The IP21 rating provides protection against vertical dripping water only; the unit must be installed in a dry, ventilated enclosure or compartment away from direct moisture exposure. For any installation forming part of a grid-connected or generator-backed system, ensure compliance with current UK wiring regulations and relevant network operator requirements.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.