Description
xVictron Orion IP67 24/12-100A (1200W) Non-Isolated DC-DC Converter
The Victron Orion IP67 24/12-100A is a non-isolated DC-DC converter rated at 1200W, designed to step down a 24V DC supply to a regulated 12V DC output at up to 100A. It is built for professional installations in vehicles, marine vessels, and off-grid systems where a weatherproof, high-current voltage converter is required.
Key Features
- 1200W continuous output power with a 24V input and 12V/100A output.
- IP67 rated enclosure: fully dust-tight and protected against temporary immersion in water, suitable for exposed or damp installation environments.
- Non-isolated design provides efficient power conversion without galvanic isolation between input and output.
- Wide input voltage range accommodates real-world 24V battery systems, including voltage fluctuations during charging and discharge.
- Output voltage is adjustable, allowing fine-tuning to suit specific load or battery requirements.
- Compact and robust aluminium housing with a weight of 2.23kg, suitable for fixed mounting in confined spaces.
- Protection against short circuit, over-temperature, and input under-voltage to safeguard connected equipment.
Product Overview
The Orion IP67 24/12-100A converts a 24V DC source to a stable 12V DC output, making it suitable for powering 12V accessories, charging 12V batteries, or supplying 12V loads from a 24V system. The non-isolated topology means the input and output share a common ground, which is standard practice in many vehicle and marine installations where a shared chassis ground is already present.
The IP67 rating is a practical advantage in installations where the converter cannot be housed in a fully protected enclosure. It can be mounted in engine bays, under vehicle floors, in bilge areas, or other locations subject to moisture, dust, and occasional water ingress. This removes the need for additional weatherproof enclosures in many installations, reducing both cost and complexity.
At 1200W continuous, this unit handles high-current 12V loads directly from a 24V bank. The adjustable output voltage allows the installer to set the output to match the requirements of the connected load or battery chemistry, within the converter's adjustment range. Built-in protections cover short circuit, over-temperature, and input under-voltage conditions, preventing damage to both the converter and downstream equipment.
Specifications
- SKU: ORI241221226
- Input voltage: 24V DC (nominal)
- Output voltage: 12V DC (adjustable)
- Output current: 100A
- Output power: 1200W
- Topology: Non-isolated
- IP rating: IP67
- Weight: 2.23kg
- GTIN: 8719076048541
Applications
- Powering 12V accessories and loads from a 24V vehicle or truck electrical system.
- Charging a 12V battery bank from a 24V house battery system in marine or motorhome installations.
- Off-grid cabins or mobile setups where a 24V primary system needs to supply 12V equipment.
- Agricultural and construction vehicles with 24V systems requiring a 12V auxiliary supply.
- Marine installations in exposed locations where IP67 protection is required without additional enclosures.
What Is Included
- 1x Victron Orion IP67 24/12-100A (1200W) DC-DC Converter
Installation Notes
This converter should be installed by a qualified electrician or auto-electrical professional familiar with high-current DC systems. At 100A output, appropriate cable sizing, fusing, and terminal torque are critical to safe operation. The non-isolated design means input and output share a common ground; verify this is compatible with your system before installation. While the IP67 rating provides protection against water ingress, the unit should not be permanently submerged. Ensure adequate ventilation around the unit to allow heat dissipation under full load.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.