Description
xVictron Orion-Tr Smart 12/12-30A (360W) Non-Isolated DC-DC Charger — ORI121236140
The Victron Orion-Tr Smart 12/12-30A is a non-isolated DC-DC battery-to-battery charger designed for 12V vehicle and marine dual-battery systems. It delivers up to 30A (360W) of charge current and is managed via Bluetooth using the VictronConnect app, making it suitable for professional van conversions, motorhomes, narrowboats and off-grid mobile installations.
Key Features
- 30A maximum output current at 12V, providing up to 360W of charging power from a 12V source battery.
- Built-in Bluetooth with VictronConnect app support for configuration, monitoring and firmware updates without additional hardware.
- Non-isolated topology allows a shared negative between input and output, simplifying wiring in single-chassis vehicle installations.
- Adaptive charge algorithm with selectable battery profiles including lithium (LiFePO4), AGM, gel and flooded lead-acid.
- Engine detection via alternator voltage sensing prevents discharging the starter battery when the engine is off.
- Two-wire BMS connection support allows direct integration with Victron lithium batteries and compatible BMS units to halt charging on command.
- Wide input voltage range accommodates fluctuating alternator output and varying state-of-charge conditions on the source battery.
Product Overview
The Orion-Tr Smart non-isolated range uses a synchronous buck converter topology. Because input and output share a common negative, this unit is suited to installations where both battery banks are in the same chassis ground system, which is the standard arrangement in most road vehicles and inland waterway craft. The non-isolated design is more efficient than a fully isolated converter at this power level, which matters when the unit is running continuously during long drives or extended generator charging sessions.
Configuration is handled entirely through VictronConnect over Bluetooth. Charge voltage, absorption time, float voltage and tail current can all be set to match the service battery chemistry. For lithium service batteries, the two-wire BMS port allows the BMS to signal the Orion-Tr Smart to stop charging when the battery is full or a cell protection event occurs. Engine detection is based on input voltage threshold: the unit only charges when the alternator raises the bus voltage above a configurable level, protecting the starter battery from depletion.
At 1.8 kg and with a compact footprint, the unit can be mounted in an engine bay, under a seat or in a battery compartment. It is designed for continuous duty at full rated current within its specified ambient temperature range.
Technical Specifications
| Parameter | Value |
| SKU | ORI121236140 |
| Input Voltage | 12V DC |
| Output Voltage | 12V DC |
| Maximum Output Current | 30A |
| Maximum Output Power | 360W |
| Isolation | Non-isolated (shared negative) |
| Connectivity | Bluetooth (VictronConnect) |
| BMS Port | Two-wire remote on/off |
| Weight | 1.8 kg |
| GTIN | 8719076048954 |
Applications
- Van conversions and campervan builds requiring alternator charging of a lithium or lead-acid service battery.
- Motorhomes with split charging requirements between starter and leisure battery banks.
- Narrowboats and canal boats with 12V single-chassis electrical systems.
- Off-grid trailers and expedition vehicles where a secondary battery must be charged from the tow vehicle's alternator.
- Light commercial vehicles with auxiliary power requirements for refrigeration, tools or communications equipment.
What Is Included
- 1x Victron Orion-Tr Smart 12/12-30A Non-Isolated DC-DC Charger (ORI121236140)
Installation Notes
This unit is non-isolated and requires a shared negative between the source and service battery banks. It is not suitable for installations where the two battery systems must be electrically separated, such as most marine applications with separate AC grounding. Wiring should be sized for the full 30A output current with appropriate fusing on both input and output cables as close to the battery terminals as practicable. For lithium service batteries, connect the BMS remote port to ensure charge cutoff on cell protection events. Installation should be carried out by a qualified auto-electrician or marine electrician familiar with dual-battery systems and the relevant wiring regulations.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.