Description
xVictron Orion-Tr Smart 12/24-10A (240W) Isolated DC-DC Charger
The Victron Orion-Tr Smart 12/24-10A is a galvanically isolated DC-DC charger that converts a 12V source (typically a vehicle or alternator) to a regulated 24V output at up to 10A (240W). It is designed for dual-battery charging in vehicles, boats and off-grid systems where electrical isolation between source and load is required.
Key Features
- Galvanic isolation between input and output, preventing ground loops and protecting sensitive electronics.
- Input voltage range of 12V with a regulated 24V output at up to 10A continuous (240W).
- Built-in Bluetooth via the VictronConnect app for configuration, monitoring and firmware updates without additional hardware.
- Adaptive charging algorithm supports lithium (LiFePO4) and lead-acid battery chemistries including AGM, gel and flooded.
- Engine detection feature prevents discharging the starter battery by monitoring input voltage before enabling the charger output.
- Programmable charge profiles allow the output voltage and absorption/float settings to be adjusted to match the connected battery.
- Wide operating temperature range with thermal protection and automatic power derating to prevent damage under high-temperature conditions.
Product Overview
The Orion-Tr Smart range uses a high-frequency transformer to provide true galvanic isolation between the input and output circuits. This is particularly important in marine and vehicle installations where multiple battery banks share a common chassis ground. Without isolation, charge current can flow through unintended paths, causing corrosion, interference or damage to electronics. The isolated design eliminates this risk entirely.
Configuration is handled entirely through the VictronConnect app over Bluetooth. There is no need for a separate interface cable or programming device. Installers can set the charge algorithm, absorption voltage, float voltage and current limit directly from a phone or tablet. The engine detection function monitors the input voltage and only enables the output once the alternator is confirmed to be running, protecting the starter battery from being drained by the auxiliary bank.
At 240W continuous output, this unit is suited to topping up a secondary 24V battery bank during transit rather than bulk charging from flat. For higher charge rates, Victron offers larger Orion-Tr Smart models. The unit is compact and wall or DIN-rail mountable, making it practical for installation in tight spaces such as vehicle cabinets or marine electrical panels.
Specifications
- SKU: ORI122424120
- Input voltage: 12V nominal
- Output voltage: 24V regulated
- Output current: 10A continuous
- Output power: 240W
- Isolation: Galvanic (transformer isolated)
- Communication: Bluetooth (VictronConnect)
- Weight: 1.3 kg
- GTIN: 8719076046073
Applications
- Charging a 24V auxiliary or leisure battery from a 12V vehicle alternator or starter battery.
- Marine dual-battery systems requiring galvanic isolation to prevent electrolytic corrosion.
- Campervans, motorhomes and commercial vehicles with split 12V/24V electrical systems.
- Off-grid cabins or mobile installations where a 12V source feeds a 24V battery bank.
- Telecommunications and industrial equipment requiring a stable, isolated 24V supply from a 12V source.
What Is Included
- 1 x Victron Orion-Tr Smart 12/24-10A (240W) Isolated DC-DC Charger
Installation Notes
Installation should be carried out by a qualified electrician or experienced installer familiar with DC systems. Ensure correct cable sizing and fusing on both the input and output sides in accordance with the unit's rated current. For marine installations, follow NMEA or RCD Directive wiring standards as applicable. The engine detection threshold and charge profile must be configured via VictronConnect before commissioning. Lithium battery profiles should only be selected when the connected battery includes a compatible battery management system (BMS).
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.