Description
xPhoenix Inverter 48/3000 230V VE.Bus
The Victron Phoenix Inverter 48/3000 230V VE.Bus is a pure sine wave inverter designed for off-grid, marine, vehicle and backup power applications. It converts 48V DC battery power to 230V AC at 3000VA continuous output, making it suitable for powering demanding loads where grid power is unavailable or unreliable. The VE.Bus interface enables integration with Victron system components including Multi units, system monitors and remote panels.
Key Features
- 3000VA continuous output at 230V AC from a 48V DC battery bank.
- Pure sine wave output suitable for sensitive electronics, motors and compressors.
- VE.Bus communication port for integration with Victron system monitors, remote panels and parallel or three-phase configurations.
- Supports parallel operation with multiple units and three-phase setup via VE.Bus.
- Built-in protection against overload, over-temperature, short circuit and low battery voltage.
- Low idle power consumption to minimise battery drain when loads are light.
- Configurable via VictronConnect or VE.Bus compatible interfaces for voltage thresholds and other parameters.
Product Overview
The Phoenix 48/3000 operates from a 48V battery bank, a voltage level commonly used in larger off-grid and backup systems where higher DC voltage reduces cable losses and improves efficiency. At 3000VA, it can handle a broad range of AC loads including power tools, refrigeration, lighting circuits and office equipment. The pure sine wave output matches grid quality AC, which is necessary for equipment with active power factor correction, variable speed drives or sensitive electronics.
The VE.Bus interface is a key differentiator from simpler inverter designs. It allows the Phoenix 48/3000 to communicate with Victron Quattro and MultiPlus units, the Color Control GX, and other VE.Bus compatible devices. This makes it a viable component in a larger managed energy system rather than a standalone unit. Multiple Phoenix inverters can be connected in parallel for increased capacity, or configured for split or three-phase output where the installation demands it.
Protection features are handled internally. The unit monitors battery voltage continuously and will shut down before the battery reaches a damaging depth of discharge. Overload and short-circuit protection prevent damage to both the inverter and connected loads. Over-temperature protection activates if the unit exceeds safe operating limits, which is relevant in enclosed or poorly ventilated installations.
Technical Specifications
| Specification | Value |
| SKU | PIN483020000 |
| Nominal DC Input Voltage | 48V |
| AC Output Voltage | 230V AC |
| Continuous Output Power | 3000VA |
| Output Waveform | Pure sine wave |
| Communication Interface | VE.Bus |
| Weight | 18.3 kg |
| GTIN | 8719076023852 |
Applications
- Off-grid solar systems with 48V battery banks requiring 230V AC output.
- Marine vessels needing reliable AC power from a DC battery system.
- Vehicle and mobile installations such as large motorhomes, expedition vehicles and broadcast units.
- Backup power systems for critical loads during grid outages.
- Larger Victron VE.Bus managed energy systems requiring a standalone inverter component.
- Parallel or three-phase configurations where multiple inverter units are required.
What Is Included
- Victron Phoenix Inverter 48/3000 230V VE.Bus unit.
Installation Notes
This inverter operates at 48V DC and 3000VA output. Installation should be carried out by a qualified electrician or accredited installer with experience in DC battery systems and off-grid AC wiring. Correct cable sizing, fusing and battery connection are critical at this power level. The unit is not grid-tied and does not require G98 or G99 notification, but all AC wiring must comply with BS 7671 (IET Wiring Regulations). Ensure adequate ventilation around the unit to prevent thermal shutdown. For VE.Bus system integration, use Victron-approved cabling and follow Victron's system design guidelines.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.