Description
xVictron Quattro 24/8000/200-100/100 230V VE.Bus Inverter Charger
The Victron Quattro 24/8000/200-100/100 is a 8000VA inverter charger designed for demanding off-grid, backup and marine or vehicle applications running on a 24V battery bank. It accepts two independent AC inputs, allowing automatic switching between shore power, a generator and inverter output without interruption. This makes it well suited to installations where supply reliability is critical and multiple AC sources are in use.
Key Features
- 8000VA continuous inverter output at 230V AC from a 24V DC battery bank.
- 200A built-in battery charger with adaptive charging algorithm to suit flooded, gel, AGM and lithium battery chemistries.
- Two independent AC inputs (100A each) for connecting shore power and a generator simultaneously, with automatic source selection.
- PowerControl and PowerAssist functions limit generator or shore power draw and supplement with battery power when loads exceed the available AC input current.
- VE.Bus communication interface for system integration, remote monitoring and configuration via Victron GX devices or VEConfigure software.
- Virtually no transfer time when switching from mains or generator to inverter, making it suitable for sensitive loads.
- Programmable relay outputs for generator start/stop and alarm signalling.
- Compatible with Victron ESS (Energy Storage System) configurations when used alongside a GX device.
Product Overview
The Quattro range sits above the MultiPlus in Victron's inverter charger lineup by virtue of its dual AC input capability. Where a MultiPlus accepts one AC source, the Quattro manages two independently, prioritising shore power when available, falling back to the generator, and inverting from the battery bank when neither source is present. The transition between sources is fast enough that most sensitive electronics, including computers and variable speed drives, continue operating without interruption.
The 200A charger is substantial for a 24V system and allows the battery bank to be recharged quickly from a generator, reducing run time and fuel consumption. The adaptive charge algorithm adjusts the charge profile based on battery behaviour over time, which is particularly useful in installations where the battery bank is not always fully cycled. Lithium battery profiles are supported, though a suitable Victron BMS is recommended for lithium installations to manage cell-level protection.
VE.Bus connectivity means the Quattro integrates directly into a Victron system managed by a Cerbo GX, Color Control GX or similar device. Multiple Quattro units can be configured in parallel for higher power output, or in split-phase and three-phase arrangements, making this unit a building block for larger system designs as well as a standalone solution.
Technical Specifications
| Parameter | Value |
| SKU | QUA248020010 |
| DC Input Voltage (Nominal) | 24V |
| Inverter Output Power | 8000VA |
| AC Output Voltage | 230V AC |
| Battery Charger Output | 200A |
| AC Input 1 Current Rating | 100A |
| AC Input 2 Current Rating | 100A |
| Communication Interface | VE.Bus |
| Weight | 41 kg |
| GTIN | 8719076024194 |
Applications
- Off-grid homes and cabins requiring high-power AC output with generator backup.
- Marine vessels with shore power and onboard generator connections.
- Large vehicles, expedition trucks and mobile command units with 24V battery systems.
- Critical backup power installations where uninterrupted supply to sensitive loads is required.
- Multi-unit parallel or three-phase systems for commercial off-grid or hybrid installations.
- Telecoms, remote industrial sites and other applications requiring dual AC source management.
What Is Included
- Victron Quattro 24/8000/200-100/100 230V VE.Bus inverter charger unit.
Installation Notes
At 41 kg, the Quattro requires two people for safe handling and must be wall-mounted on a surface capable of bearing the load. DC cabling to a 24V battery bank at this power level involves very high currents and must be sized and fused correctly by a qualified electrician or accredited installer. Both AC inputs must be wired in accordance with current IET Wiring Regulations (BS 7671). For any grid-connected or generator-connected installation in the UK, ensure compliance with the relevant network operator requirements and that all work is carried out by a suitably qualified professional. Lithium battery installations require a compatible Victron BMS. Configuration is performed via VEConfigure software or a connected GX device.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.