Description
xVictron SmartSolar MPPT 150/100-Tr VE.Can — SCC115110411
The Victron SmartSolar MPPT 150/100-Tr VE.Can is a high-current solar charge controller designed for professional off-grid, marine and large residential installations. It accepts a maximum PV open-circuit voltage of 150V and delivers up to 100A of charge current, making it suited to larger battery banks and multi-panel arrays. The VE.Can interface enables integration into Victron system networks alongside inverter/chargers, GX devices and other compatible equipment.
Key Features
- Maximum PV open-circuit voltage of 150V with a 100A maximum charge current output.
- Built-in Bluetooth via the SmartSolar platform, allowing direct configuration and monitoring through the Victron Connect app without additional hardware.
- VE.Can connectivity for integration into Victron system networks, enabling communication with GX devices, Quattro and MultiPlus inverter/chargers.
- TR (screw terminal) connection type for secure, high-current DC wiring in permanent installations.
- Compatible with lithium (LiFePO4), AGM, gel, flooded and other battery chemistries, with user-configurable charge profiles.
- Automatic battery voltage detection across 12V, 24V and 48V systems.
- Load output functionality for direct connection of DC loads with programmable control algorithms.
- Supports networked charging via VE.Smart Networking, allowing multiple chargers and battery monitors to share data and synchronise charge states.
Product Overview
The 150/100 rating means this controller can handle PV arrays with an open-circuit voltage up to 150V and deliver up to 100A into the battery. At 48V, that equates to a maximum charge power of around 5,800W, making it one of the higher-output single-unit MPPT controllers in the Victron range. The TR (screw terminal) variant is the standard choice for fixed installations where ring-terminal or direct cable connections are preferred over MC4 or other connector types.
The VE.Can bus is a CAN-based communication protocol used across Victron's professional product range. Connecting this controller to a GX device (such as a Cerbo GX) via VE.Can gives full system visibility, remote monitoring through the VRM portal, and the ability to coordinate charging across multiple devices. This is particularly relevant in larger systems where a single MPPT controller is one of several charge sources alongside a generator or shore power connection.
Built-in Bluetooth means the controller can be configured and monitored directly from a phone or tablet using the Victron Connect app, without needing a separate Bluetooth dongle. Charge algorithm, battery type, absorption voltage, float voltage and other parameters are all adjustable through the app. For installers working across multiple sites, this simplifies commissioning and reduces the need for additional accessories.
Technical Specifications
| Parameter | Value |
| SKU | SCC115110411 |
| Maximum PV open-circuit voltage | 150V |
| Maximum charge current | 100A |
| Compatible battery voltages | 12V, 24V, 48V (auto-detect) |
| Communication interfaces | VE.Can, Bluetooth (built-in) |
| Connection type | TR (screw terminals) |
| Weight | 4.5 kg |
| GTIN | 8719076050353 |
Applications
- Large off-grid solar systems with 48V battery banks requiring high charge current.
- Marine and narrowboat installations where VE.Can system integration is required.
- Commercial and agricultural off-grid sites with multi-panel PV arrays.
- Hybrid systems combining solar with generator or shore power via a Victron inverter/charger and GX device.
- Remote monitoring installations using the Victron VRM portal for ongoing system oversight.
What Is Included
- 1 x Victron SmartSolar MPPT 150/100-Tr VE.Can charge controller (SCC115110411)
Installation Notes
This controller handles significant DC currents and must be installed by a qualified electrician or MCS-accredited installer. Correct fusing and cable sizing between the PV array, controller and battery bank is essential. The VE.Can bus requires proper termination resistors at each end of the network; ensure the CAN network is correctly configured when connecting multiple VE.Can devices. Battery chemistry and voltage settings should be verified during commissioning using the Victron Connect app. For any grid-connected elements of the wider system, G98 or G99 compliance requirements apply to the inverter stage and should be confirmed with the relevant DNO.
Return Policy
xWe offer a 14-day, no-quibble returns or replacement policy because we want you to be totally satisfied with your purchase.
If you are unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 30 days of receiving it. We will pay for your return postage on a faulty item as long as you send it using Royal Mail 2nd class recorded delivery (for EU or International Shipments, you have to use our UPS account, we will provide you with a return label)
Please keep in mind the following:
- Items returned within 14 days but not in their original and undamaged packaging will also incur a -15% charge per package.
- If you return an item that doesn't adhere to our returns procedure or doesn't include a returns form, you may be liable for a £10 administration fee
- Individual items from a bundle can't be returned, refunded or exchanged. If you want a refund/credit/exchange for a bundle, all items must be returned to us.
Before you return your item, please make sure that:
- You follow our returns process (outlined below)
- The goods and packaging are undamaged
IMPORTANT: We need to be able to identify an item with your order. We can only do this if you follow our returns process. Please do not send us items back that do not follow this process as they cannot be identified properly and will not be replaced or refunded.
What delivery method do I need to use when returning an item?
You must send the goods back to us via Royal Mail 2nd class recorded delivery. Refunds on faulty items returned are reimbursed within 5 working days.
Can I return just one item from multiple purchases?
Yes. Once you start the returns process you will go to a page that will allow you to choose which items you want to be replaced or refunded.
Returning faulty goods
If your item is faulty, you need to follow the returns policy, where you will be able to state that it’s faulty. The product will then arrive at our warehouse for testing.
If your purchase is not within 14 days
You can still exchange your item for a different product or for credit to use on the Voltacon Solar or Ledison-led-lights.co.uk websites (-15% from the credit amount).
Returns outside of the 14-day period do not qualify for the free returns policy.
Returning an item within the warranty
If you have a warranty and want to return a faulty item, you just need to follow our standard returns process. When we receive your item, we will then check that it’s within warranty and for any faults before arranging a replacement.